Commit Graph

14 Commits

Author SHA1 Message Date
Chris Mason 1b956ec817 stm32: Add support for F413 MCUs.
Includes:
- Support for CAN3.
- Support for UART9 and UART10.
- stm32f413xg.ld and stm32f413xh.ld linker scripts.
- stm32f413_af.csv alternate function mapping.
- startup_stm32f413xx.s because F413 has different interrupt vector table.
- Memory configuration with: 240K filesystem, 240K heap, 16K stack.
2019-05-02 16:26:53 +10:00
boochow 9d3372bded stm32: Add peripheral support for STM32L432.
The L432 does not have: GPIOD, TIM3, SPI2, ADC dual mode operation, 2-banks
flash.
2018-12-06 13:32:43 +11:00
Michael Paul Coder fe452afab2 stm32/flashbdev: Add missing include for irq.h.
This is required for mboot to build.
2018-11-26 16:34:13 +11:00
Andrew Leech 17f7c683d2 stm32: Add support for STM32F765xx MCUs.
This part is functionally similar to STM32F767xx (they share a datasheet)
so support is generally comparable.  When adding board support the
stm32f767_af.csv and stm32f767.ld should be used.
2018-09-20 15:16:03 +10:00
Damien George 6b3d6da74b stm32/flashbdev: Protect flash writes from cache flushing and USB MSC. 2018-09-12 15:58:42 +10:00
Damien George 0941a467e7 stm32: Change flash IRQ priority from 2 to 6 to prevent preemption.
The flash-IRQ handler is used to flush the storage cache, ie write
outstanding block data from RAM to flash.  This is triggered by a timeout,
or by a direct call to flush all storage caches.

Prior to this commit, a timeout could trigger the cache flushing to occur
during the execution of a read/write to external SPI flash storage.  In
such a case the storage subsystem would break down.

SPI storage transfers are already protected against USB IRQs, so by
changing the priority of the flash IRQ to that of the USB IRQ (what is
done in this commit) the SPI transfers can be protected against any
timeouts triggering a cache flush (the cache flush would be postponed until
after the transfer finished, but note that in the case of SPI writes the
timeout is rescheduled after the transfer finishes).

The handling of internal flash sync'ing needs to be changed to directly
call flash_bdev_irq_handler() sync may be called with the IRQ priority
already raised (eg when called from a USB MSC IRQ handler).
2018-09-12 15:46:04 +10:00
Peter D. Gray a8736e5c36 stm32/flashbdev: Fix bug with L4 block cache, dereferencing block size.
The code was dereferencing 0x800 and loading a value from there, trying to
use a literal value (not address) defined in the linker script
(_ram_fs_cache_block_size) which was 0x800.
2018-07-19 12:15:34 +10:00
Tobias Badertscher 708cdb6276 stm32: Add support for STM32L496 MCU. 2018-05-18 22:37:30 +10:00
Damien George 4c0f664b1a stm32/flash: Remove unused src parameter from flash_erase(). 2018-05-02 13:11:56 +10:00
Damien George a6009a9e35 stm32/*bdev.c: Eliminate dependency on sys_tick_has_passed.
Explicitly writing out the implementation of sys_tick_has_passed makes
these bdev files independent of systick.c and more reusable as a general
component.  It also reduces the code size slightly.

The irq.h header is added to spibdev.c because it uses declarations in that
file (irq.h is usually included implicitly via mphalport.h but not always).
2018-03-27 20:38:57 +11:00
Damien George 626d6c9756 stm32/storage: Introduce MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE cfg.
This config variable controls whether to support storage on the internal
flash of the MCU.  It is enabled by default and should be explicitly
disabled by boards that don't want internal flash storage.
2018-03-10 00:59:43 +11:00
Damien George 1e4caf0b1e stm32/storage: Merge all misc block-dev funcs into a single ioctl func.
It makes it cleaner, and simpler to support multiple different block
devices.  It also allows to easily extend a given block device with new
ioctl operations.
2018-03-10 00:59:43 +11:00
iabdalkader 81f8f5f163 stm32/flash: Add flash support for H7 MCUs. 2018-03-09 15:09:49 +11:00
Damien George fa13e0d35b stm32: Factor out flash and SPI block-device code to separate files.
Prior to this patch, storage.c was a combination of code that handled
either internal flash or external SPI flash and exposed one of them as a
block device for the local storage.  It was also exposed to the USB MSC.

This patch splits out the flash and SPI code to separate files, which each
provide a general block-device interface (at the C level).  Then storage.c
just picks one of them to use as the local storage medium.  The aim of this
factoring is to allow to add new block devices in the future and allow for
easier configurability.
2018-02-13 22:21:46 +11:00