907c5d387f
Tweak black_bindings
...
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.
Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation
This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)
It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.
I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
2022-09-30 11:18:13 -05:00
db065a299f
Merge pull request #6933 from jepler/ 🥧 🐮
...
Implement a useful subset of `wifi` and `socketpool` modules on 🥧 🐮
2022-09-28 18:09:24 -04:00
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out
2022-09-28 10:06:33 -05:00
b2cc8d2aad
run black_bindings across all bindings
2022-09-27 15:21:42 -05:00
e25c195b78
fix broadcom UART ringbuf init
2022-09-25 09:12:23 -04:00
ea15a9118a
ringbuf cleanup
2022-09-21 10:03:05 -04:00
14b604f48c
Add LED pin definition to Zero 2W board
2022-09-10 23:18:25 -04:00
28756936d5
Add HW_LED_STATUS pin to Zero 2W board
2022-09-10 23:17:02 -04:00
38a0ca324e
Uses different pins for RX/TX
2022-09-10 21:48:10 -04:00
f4eb618598
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:42:41 -04:00
1bdf9fca40
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:40:31 -04:00
1d03d73c13
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:51 -04:00
29e0aba72f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:03 -04:00
fb4062d23f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:38:16 -04:00
72c479efe6
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:37:31 -04:00
a892af8d77
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:41 -04:00
7708f19ec8
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:01 -04:00
0913e3a148
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:34:45 -04:00
ecb74aa652
Remove CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:33:29 -04:00
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
84807cd6eb
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:13:19 -04:00
eabe8b971a
list extensions instead of macros names ("bin,uf2" not BIN_UF2)
...
the modules_support_matrix usees a dictionnary per board instead of a list
optionally include the frozen modules URLs in it
2022-07-26 18:15:59 +02:00
d021d9ae4a
Move build extensions to board directories
...
- define CIRCUITPY_BUILD_EXTENSIONS to predefined values
- set CIRCUITPY_BUILD_EXTENSIONS in port and board config
- reuse the support matrix "get_settings_from_makefile" to get it
- move the existing port and board specific values
- remove the C3 specific board values because it's not the default
- update build_release_files.py to use get_settings_from_makefile
2022-07-26 18:15:50 +02:00
ac460dd1e1
Merge branch 'main' into esp32
2022-07-13 15:30:53 -07:00
c4dfd8e30a
Fix default BOARD setting & messages
...
It's important that these lines NOT be indented with tabs, because
that provokes Make to say that commands appear before a target.
2022-07-07 17:17:15 -05:00
8bb369cac5
refactor debug UART to console UART; get working on ESP32
2022-06-30 23:16:46 -04:00
4d776339ad
Separate translate object control from LTO
2022-05-31 12:42:59 -07:00
9d10a3da66
Conditionalize LTO
2022-05-27 12:59:54 -07:00
a01dec1df9
message consolidation and more use of validators
2022-05-19 15:38:37 -04:00
78cf0a90af
Make MP_PROPERTY_GETTER / _GETSET fully declare the property
...
This will enable setting data attributes, namely, the section of the
symbol.
2022-05-03 08:48:53 -05:00
31da335cac
Introduce, use MP_PROPERTY_GETTER, _GETSET
...
Later, these can be changed in cunning ways to save flash storage.
2022-05-03 08:48:52 -05:00
83593a1558
Start of USB host API
...
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)
Related to #5986
2022-03-07 18:07:25 -08:00
a8d8651873
Canonical C style for half_duplex = true/false
2022-02-08 23:13:22 -05:00
89ad767b8f
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
cc410ad6a3
common-hal I2C combined write_read
2022-01-31 22:03:30 -05:00
bec36f5c7f
Add Pi Zero and update PIDs
2022-01-07 11:47:31 -08:00
39a239113f
Enable neopixel for status
2022-01-07 11:23:50 -08:00
3238d8364d
Piunora + full build + high speed usb
2022-01-07 11:23:50 -08:00
5f32d1f34b
Piunora pinout
2022-01-07 11:23:49 -08:00
afd686986a
Merge pull request #5800 from tannewt/rpi_zero
...
Initial Pi Zero support
2022-01-07 09:05:30 -05:00
2a2f94df15
Update tinyusb for zero support
2022-01-06 08:52:33 -08:00
48d826b15d
Never reset SD card pins
2022-01-04 19:08:14 -08:00
38d2472683
Fix cache detection on 64 bit
2022-01-04 17:38:29 -08:00
f64fede735
Correct board name and fix USB with memory barrier
2022-01-04 16:11:40 -08:00
87f4205ec9
Fix Cortex-A MMU init
2022-01-04 12:29:48 -08:00
756b9f6dfa
Initial Pi Zero support
...
Both SD card and USB don't work. REPL works over UART.
Progress on #5631
2021-12-30 18:32:59 -08:00
14815f6de7
fix typo in comment
2021-12-30 14:12:37 -05:00
9dea49516e
update logic for JTAG pull downs
2021-12-30 14:09:43 -05:00
7cdffba09f
Merge remote-tracking branch 'upstream/main' into jerryn_gpio
2021-12-29 12:58:41 -05:00
ed3ddea2da
set pulldown for broadcom jtag pins
2021-12-28 11:26:47 -05:00
Jeff Epler
Dan Halbert
Dan Halbert
RetiredWizard
Neradoc
Scott Shawcroft
Scott Gauche
jerryneedell