Commit Graph

26 Commits

Author SHA1 Message Date
Damien George f7c4f9a640 stmhal: For SPI config, use HW_SPIx_SCK instead of HW_ENABLE_SPIx.
Previously, SPI was configured by a board defining MICROPY_HW_ENABLE_SPIx
to 0 or 1.  Now, the board should define MICROPY_HW_SPIx_SCK, MISO, MOSI
and NSS.  This makes it the same as how I2C is configured.
2015-12-12 15:02:02 +00:00
Damien George f705cb5f7a stmhal: Update PYBv3 and PYBv4 pin defs to include MMA pins, and others. 2015-10-31 11:14:15 +00:00
Damien George 6f70283909 stmhal: Make accel AVDD pin configurable via mpconfigboard.h. 2015-10-29 22:40:42 +00:00
Dave Hylands 872f9af6ae stmhal: Use CMSIS_MCU definition from mpconfigboard.mk
This needs to land afte #1407 lands, since #1407 is where
the CMSIS_MCU was defined.
2015-08-07 08:54:14 +01:00
Dave Hylands be66a9ecf6 stmhal: Generate modstm constants per build
This causes unnecessary constants to no longer be generated.
Some constants (like UART_BRR) are different between the F4 and F7
2015-08-07 08:46:43 +01:00
Damien George a39df51d8a stmhal: Update Makefile and board configs to compile with relocated hal. 2015-07-20 12:30:18 +01:00
Damien George 70446f46c2 stmhal: Allow to name SPI busses, and give them names for pyboard. 2015-05-27 17:21:42 +01:00
Damien George 0e6f5e08e1 stmhal: Allow to name I2C busses, and give them names for pyboard. 2015-05-27 17:16:26 +01:00
Damien George 1775b65e07 stmhal: Remove PYBVxx defines and use config vars for UART/CAN names.
Now all stmhal-based boards can name their peripherals (if they want) to
any string.
2015-05-27 16:51:04 +01:00
Eero af Heurlin 2378be4e93 stmhal: Allow to configure UART pins completely via mpconfigboard.h. 2015-05-03 13:48:26 +01:00
Damien George 0435e76250 stmhal: Make ld and af files configurable within Makefile.
Each board now needs an mpconfigboard.mk file which defines AF_FILE and
LD_FILE.

Also moved stm32f405.ld to boards/ directory to keep things organised.
2015-04-18 21:40:59 +01:00
Damien George d15fe5a6b3 stmhal: Make I2C busses and their pins configurable in mpconfigboard.h. 2015-04-18 21:40:59 +01:00
Damien George 2e5704d101 stmhal: Make a HW config option for LED4 being controlled by PWM. 2015-04-18 21:40:58 +01:00
Damien George 8bdbc20e74 stmhal: Make HSE PLL parameters configurable per board. 2015-04-18 21:40:58 +01:00
Damien George 49fe6dc89a stmhal: Add config option to use LSE/LSI for RTC.
Most boards (except the pyboard) don't have a 32kHz crystal so they
should use the LSI for the RTC.
2015-03-16 22:54:44 +00:00
Dave Hylands d7f199465f stmhal: Add support for FEZ Cerb40 II board from ghielectronics.com. 2015-01-21 00:11:04 +00:00
Damien George 131185a2b8 stmhal: Add MICROPY_HW_USB_OTG_ID_PIN config, set for relevant boards.
This config option is for the USB OTG pin, pin A10.  This is used on
some boards but not others.  Eg PYBv3 uses PA10 for LED(2), so it
shouldn't be used for OTG ID (actually PA10 is multiplexed on this
board, but defaults to LED(2)).

Partially addresses issue #1059.
2015-01-12 16:13:29 +00:00
Damien George 181bfb6db2 stmhal: Add MICROPY_HW_USB_VBUS_DETECT_PIN option, for boards without it
Since all currently supported boards use pin A9 for this function, the
value of the macro MICROPY_HW_USB_VBUS_DETECT_PIN is not actually used,
just the fact that it is defined.

Addresses issue #1048.
2015-01-07 23:54:57 +00:00
Damien George 6dba992182 stmhal: Add config option to disable/enable CAN driver. 2014-10-05 18:05:26 +01:00
Damien George b766e79510 stmhal: Initial implementation of cc3k module and driver.
Pulled in and modified work done by mux/iabdalkader on cc3k driver, from
iabdalkader-cc3k-update branch.  That branch was terribly messy and had
too many conflicts to merge neatly.
2014-09-26 00:57:26 +01:00
Damien George 3ef911345c stmhal: Update STM32Cube F4 HAL driver to V1.3.0.
This patch updates ST's HAL to the latest version, V1.3.0, dated 19 June
2014.  Files were copied verbatim from the ST package.  Only change was
to suppress compiler warning of unused variables in 4 places.

A lot of the changes from ST are cosmetic: comments and white space.
Some small code changes here and there, and addition of F411 header.

Main code change is how SysTick interrupt is set: it now has a
configuration variable to set the priority, so we no longer need to work
around this (originall in system_stm32f4xx.c).
2014-08-06 22:33:31 +01:00
mux a75e382a9b Change MCU name config micro 2014-06-27 00:35:53 +02:00
mux fe81eea967 Add MICROPY_HW_MICRO_NAME to boards config 2014-06-19 14:40:57 +02:00
Damien George ae8feac598 stmhal: Wrap CC3000 driver in MICROPY_HW_ENABLE_CC3K.
This renames MICROPY_HW_HAS_WLAN to MICROPY_HW_ENABLE_CC3K (since it's a
driver, not a board feature) and wraps all CC3000 code in this #if.
It's disabled for all boards.
2014-05-03 17:32:55 +01:00
Damien George ff91156d34 stmhal: Improved configurability for I2C and SPI busses.
The HAL handles for the I2C/SPI objects are rather large, so we don't
want to unnecessarily include them.
2014-04-20 19:06:15 +01:00
Damien George 09d207785c stmhal: Unify naming of HW config; make SD detect configurable.
All board config macros now begin with MICROPY_HW_.

Renamed PYBv10 to PYBV10, since macros should be all uppercase.

Made SDCARD_DETECT configurable in mpconfigport.h, so that the SD
detect pin can be easily configured.
2014-03-30 12:30:35 +01:00