dd54e8f657
PDMIn: enable IRQ; need a volatile; call pdmin_reset()
...
enable IRQ for PDMIn
2022-01-12 11:44:43 -05:00
e76495605b
Merge pull request #5840 from tannewt/enable_tr_builds
...
Enable Turkish language builds
2022-01-12 09:02:39 -06:00
46a61e6788
Provide filesystem stubs to fit in with changes from 41d494df0b
...
filesystem stub implementation is used when DISABLE_FILESYSTEM is set.
2022-01-12 12:30:24 +01:00
8226fb8e0b
Bring pins in line with board documentation.
...
This brings the pins in line with the documented [pinouts]. The only
"special" pins:
- GP0, GP1 are mentioned as the default UART, so we init them as
such and give them the TX and RX alternative names.
- GP16 is connected to the onboard neopixel DIN line and we assign it
the NEOPIXEL name. (Power of the neopixel is connected to the 3.3V
rail, not a pin. See [schematic].)
- GP26, GP27, GP28, GP29 have unambiguous ADC designations in the
[pinouts], so we assign the `A` analogue names as the Pico board
definition does.
[pinouts]: https://www.waveshare.com/wiki/RP2040-Zero#Pinouts
[schematic]: https://www.waveshare.com/w/upload/4/4c/RP2040_Zero.pdf
2022-01-12 12:27:54 +01:00
f2ccf87e0b
extmod/network_ninaw10: Use socket timeout preset in modusocket.
2022-01-12 14:37:40 +11:00
842da93011
extmod/modusocket: Initialise accepted socket state.
2022-01-12 14:37:32 +11:00
67420de4f4
extmod/modusocket: Allow setting timeout on unbound sockets.
...
For an extended state socket, if settimeout() is called before a NIC is
bound, save the timeout until the NIC is bound.
2022-01-12 14:36:55 +11:00
9b825869c5
raspberrypi : Check UART before claiming pins, claim it after
...
Co-authored-by: Scott Shawcroft <scott@adafruit.com>
2022-01-11 22:02:47 +01:00
9c6e34df0d
Merge pull request #5835 from weblate/weblate-circuitpython-main
...
Translations update from Hosted Weblate
2022-01-11 10:42:08 -08:00
0d11e5d76a
Translated using Weblate (Chinese (Pinyin))
...
Currently translated at 99.1% (1022 of 1031 strings)
Translation: CircuitPython/main
Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/zh_Latn/
2022-01-11 15:56:57 +01:00
2251d0f4b0
raspberrypi: Claim UART after checking pins
...
If, for some reason, you mix up TX and RX when calling `busio.UART` (who would do that ;) ), you get `Invalid pins`. When you go to try again, you'll get `All UART peripherals are in use` because the interface was claimed as busy before pins are verified. This should fix that issue.
2022-01-11 15:13:36 +01:00
d23d2e7bf4
Merge pull request #5819 from tannewt/piunora
...
Add Piunora and Zero. Also, enable full build
2022-01-10 19:33:23 -05:00
968c57e045
Merge pull request #5829 from kattni/tft-feather-pin-fix
...
Fix typo, pin order.
2022-01-10 15:25:45 -05:00
838a007ca9
Merge pull request #5813 from EmergReanimator/code_improvements
...
Introduced ringbuf_init to perform static buffer initialisation
2022-01-10 12:12:25 -08:00
4efbfca2b0
Fix typo, pin order.
2022-01-10 14:45:54 -05:00
1220346195
Enable Turkish language builds
2022-01-10 11:08:29 -08:00
49451c06a9
Merge pull request #5826 from weblate/weblate-circuitpython-main
...
Translations update from Hosted Weblate
2022-01-10 11:03:45 -08:00
b47b245c2e
windows/appveyor: Build mpy-cross only once for mingw-w64.
...
The main Makefile builds the mpy-cross executable automatically if
it doesn't exist since 78718fffb1
2022-01-10 15:01:03 +01:00
86a482f520
add ble stack 7.3.0 version for complie the uf2 flie
2022-01-10 11:05:06 +08:00
811715e8cc
Translated using Weblate (Turkish)
...
Currently translated at 5.7% (59 of 1031 strings)
Translation: CircuitPython/main
Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/tr/
2022-01-09 22:53:35 +01:00
476b17b987
Merge pull request #5822 from PontusO/main
...
Added missing LDO control pin (SARA_PWR)
2022-01-09 19:18:07 +05:30
ff0227fa0d
esp32/boards/GENERIC_D2WD: Build with -Os optimisation.
...
This board has only 2MiB of flash so the build needs to be reduced in size
to fit. Commit 549448e8bb
2022-01-09 11:25:37 +11:00
e23b272595
Added missing LDO control pin (SARA_PWR)
2022-01-08 16:39:48 +01:00
e712e50aed
Updated extra coverage test corresponding to change from 6b872aca
2022-01-08 11:05:09 +01:00
44997523e1
Fix Pi Zero file extension
2022-01-07 16:31:21 -08:00
783106545c
Remove LED pin.
...
There's just the NEOPIXEL on this board, no other LED.
2022-01-07 23:25:50 +01:00
d8f18d36a4
Initial Waveshare RP2040-Zero board definition
...
`board.NEOPIXEL` works. Once you have an LED cycling colours, you're 99%
done. :-)
2022-01-07 23:20:10 +01:00
6b872acab7
Update py/ringbuf.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-01-07 21:18:51 +01:00
bec36f5c7f
Add Pi Zero and update PIDs
2022-01-07 11:47:31 -08:00
39a239113f
Enable neopixel for status
2022-01-07 11:23:50 -08:00
3238d8364d
Piunora + full build + high speed usb
2022-01-07 11:23:50 -08:00
5f32d1f34b
Piunora pinout
2022-01-07 11:23:49 -08:00
fb6ab72392
Merge pull request #5816 from bd34n/bdmicro_vina_d51_led_aux
...
ports/atmel-samd/boards/bdmicro_vina_d51/pins.c: Add LED_AUX pin.
2022-01-07 10:47:32 -08:00
06ddf06a49
Merge pull request #5817 from EmergReanimator/file_permission_fix
...
Files' execution permission fix
2022-01-07 10:45:10 -08:00
afd686986a
Merge pull request #5800 from tannewt/rpi_zero
...
Initial Pi Zero support
2022-01-07 09:05:30 -05:00
1892d03740
mimxrt,stm32: Enable MICROPY_PY_USSL_FINALISER.
...
This is needed because these ports allocate mbedtls data on the MicroPython
heap, and SSL socket objects must be fully cleaned up when they are garbage
collected, to free this memory allocated by mbedtls. As part of this,
gc_sweep_all() will now ensure that the MP_STATE_PORT(mbedtls_memory)
linked-list is fully deallocated on soft reset.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-08 00:02:04 +11:00
772058a6bd
py/mpconfig.h: Define MICROPY_PY_USSL_FINALISER only if not defined.
...
So a port can define it even if MICROPY_PY_USSL is not defined.
Signed-off-by: Damien George <damien@micropython.org>
2022-01-07 23:59:17 +11:00
54065a7719
Updated to latest uf2 commit where file permissions are corrected.
2022-01-07 10:04:11 +01:00
990c00209f
Removed obsolete file.
2022-01-07 09:47:25 +01:00
0b5681a310
Added execution permission for board and memory info python scripts
2022-01-07 09:46:16 +01:00
22cf0940e1
py/modbuiltins: Add additional macro for extending builtins.
...
Mainly useful for defining additional globals in boards and variants.
2022-01-07 11:36:52 +11:00
df3f59ca4b
ports: Update board.json files to link to new board images.
...
Signed-off-by: Damien George <damien@micropython.org>
2022-01-07 11:33:28 +11:00
5256748b1b
Fix up filesystem safe mode comment
2022-01-06 14:36:16 -08:00
1fb4f02de2
ports/atmel-samd/boards/bdmicro_vina_d51/pins.c: Add LED_AUX pin.
2022-01-06 16:32:17 -05:00
fa272f5a70
Fix iMX and zero_w build extension
2022-01-06 10:24:02 -08:00
513a954d92
Merge pull request #5812 from EmergReanimator/tinyusb_port_config
...
Allow to tailor tinyusb configuration for port specific needs
2022-01-06 10:06:46 -08:00
d117bc7775
Merge pull request #5815 from weblate/weblate-circuitpython-main
...
Translations update from Hosted Weblate
2022-01-06 09:55:30 -08:00
2a2f94df15
Update tinyusb for zero support
2022-01-06 08:52:33 -08:00
f3bd397639
Translated using Weblate (Turkish)
...
Currently translated at 4.4% (46 of 1031 strings)
Translation: CircuitPython/main
Translate-URL: https://hosted.weblate.org/projects/circuitpython/main/tr/
2022-01-06 15:54:10 +01:00
ee8000050d
Fixed unix port extra_coverage test failure
2022-01-06 13:00:20 +01:00
Dan Halbert
Jeff Epler
EmergReanimator
Chris Wesseling
iabdalkader
arturo182
Scott Shawcroft
hexthat
Dan Halbert
Kattni
Scott Shawcroft
stijn
0hotpotman0
Gökhan Koçmarlı
MicroDev
Damien George
Pontus Oldberg
Chris Wesseling
Brian Dean