17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2
...
Merge MicroPython v1.11 into CircuitPython
2021-04-27 11:02:02 -07:00
76033d5115
Merge MicroPython v1.11 into CircuitPython
2021-04-26 15:47:41 -07:00
43840363c2
Fix submodule
2021-04-26 17:59:21 -04:00
872fff7fbb
simplify system_on_idle_until_alarm()
2021-04-25 23:59:21 +09:00
7accb8b173
modify copyright notice.
2021-04-25 19:57:21 +09:00
a17fcb6d1a
add copyright notice. remove obsolete comments.
2021-04-25 19:19:11 +09:00
4e3c1d4a4c
[build] Allow USB to be set to 0
...
Unify USB-related makefile var and C def as CIRCUITPY_USB.
Always define it as 0 or 1, same as all other settings.
USB_AVAILABLE was conditionally defined in supervisor.mk,
but never actually used to #ifdef USB-related code.
Loosely related to #4546
2021-04-23 11:13:34 -04:00
346740e152
Merge pull request #4609 from Neradoc/add_nrf_countio
...
NRF: implement countio
2021-04-23 08:37:00 -04:00
43c16c89c4
Account for max_packet_size in outgoing length
2021-04-15 16:34:06 -07:00
aa28d4f315
Allow setting max_packet_size for PacketBuffer
...
This is handy for remote characteristics because it allows for
the PacketBuffer binding code to have the correct max size. This
PR also adds checks so we don't write outside the outgoing buffer.
2021-04-14 17:09:48 -07:00
0d743224f2
add countio to nrf port
2021-04-14 01:37:19 +02:00
b273f59c4e
Assume max characteristic size when the client
2021-04-13 15:37:47 -07:00
6e9429d779
soft reboot for pretending deep sleep.
2021-04-12 20:53:14 +09:00
15764b4c24
Merge remote-tracking branch 'upstream/main' into nrf52-sleep
2021-04-09 13:48:45 -04:00
1b60c9d033
Merge pull request #4580 from jepler/incrementalencoder-refactor
...
IncrementalEncoder: factor out the quadrature state machine
2021-04-09 13:10:02 -04:00
61e33a5619
fix nrf ISR; make direction consistent across ports; save code size
2021-04-09 11:07:47 -04:00
72055ff02b
Merge pull request #4578 from tannewt/packetbuffer_lengths
...
Improve PacketBuffer lengths and remove packet_size
2021-04-08 18:55:24 -04:00
d69ca4a8ae
nrf: switch to shared softencoder implementation
2021-04-08 16:36:10 -05:00
e3b3f97fa6
Improve PacketBuffer packet lengths for remote service
2021-04-08 13:25:11 -07:00
1afd204828
Changed error message to display the generic term 'system firmware' instead of the Nordic specific term 'soft device'
2021-04-02 20:34:37 +02:00
58835e5a5b
Two small PacketBuffer fixes
...
1. Allow for ctrl-c during a write.
2. Handle disconnects when acting as a client.
2021-04-01 14:16:35 -07:00
0752bbd5fd
Fix central pairing and crash on clear
...
The list_clear would crash if we tried to clear a NULL list. (It
can happen if we haven't tried to discover any services.)
2021-03-31 16:04:04 -07:00
0890b54cd9
More formatting
2021-03-16 08:29:04 -05:00
fb437d8280
Formatting fixes
2021-03-16 08:22:02 -05:00
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
c8f36e604c
reset myself, not go REPL, after wakeup from deep sleep.
2021-03-09 00:42:22 +09:00
51c7a49853
Merge branch 'main' into nrf52-sleep
2021-03-07 20:50:53 +09:00
2eed9a1735
old System OFF sleep code for future reference.
2021-03-07 20:21:33 +09:00
2795c002ad
disable QSPI while system ON idle loop.
2021-03-07 19:14:04 +09:00
3fab9f8b1b
new wait-until-alarm design, don't use System OFF.
2021-03-07 01:09:54 +09:00
e0b96c0f43
[nrf] No need to store `buffer_length` as part of `audiopwmio_pwmaudioout_obj_t`
2021-03-05 06:01:58 -05:00
238484ec26
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-03-01 15:18:32 -06:00
7cecd99658
remove unused debug printf's.
2021-02-28 16:04:29 +09:00
3e47e00291
address the pretending-to-deep-sleep issue.
2021-02-28 15:57:37 +09:00
498debc826
remove unused debug printf's.
2021-02-28 15:37:25 +09:00
1d1ff5f308
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-02-26 09:56:35 -06:00
3f08cb47b8
Merge remote-tracking branch 'adafruit/main' into busio-uart-rp
2021-02-25 16:59:15 -08:00
0f8c96f424
remove trailing whitespaces.
2021-02-26 09:11:35 +09:00
7fd4648cd5
rase error if Alarm time >= 512 sec.
2021-02-26 09:06:11 +09:00
277a67d876
call touchalarm funcs as well as pin/timealarm.
2021-02-26 08:11:50 +09:00
2aa5aec0d5
cleanup.
2021-02-26 01:45:12 +09:00
c713d31d0d
move externs to .h
2021-02-26 01:20:55 +09:00
c86ca2a4ff
move externs to .h
2021-02-26 00:51:52 +09:00
9328d09a7a
re-enable parameters check.
2021-02-26 00:50:44 +09:00
61a69daae1
raise NotImplementedError when construct TouchAlarm.
2021-02-25 08:19:03 +09:00
5d7fdafcde
implement suggested changes
...
- add internal buffering
- rtc initialization fix
2021-02-25 00:48:36 +05:30
f66896ce32
use nRF SDK function to set up memory retention.
2021-02-25 02:34:43 +09:00
9661d67cd3
replace MY_DEBUG_UART -> NRF_DEBUG_PRINT.
2021-02-25 01:49:57 +09:00
0f188befb6
set RAM retention just before deep sleep
2021-02-24 00:12:25 +09:00
ec64fa6a29
move dump_xxx functions to debug_uart.c.
2021-02-23 12:16:37 +09:00
9df0f439f3
alarm/pin/__init__.c is no longer used.
2021-02-23 10:31:49 +09:00
1da8b9900a
Merge branch 'main' into nrf52-sleep
2021-02-21 13:35:06 +09:00
36c59250dd
some cleanups.
2021-02-21 09:57:14 +09:00
793198909e
set SleepMemory size to 256 bytes.
2021-02-21 08:19:39 +09:00
41d9d4e0ab
call sd API only when sd enabled.
2021-02-21 08:17:57 +09:00
26f8f532f1
safe mode fix.
2021-02-21 00:47:07 +09:00
5c37b73c6d
fix typo to fix nrf builds
2021-02-18 11:09:32 -05:00
cf2427c561
light sleep reason fix.
2021-02-17 21:51:28 +09:00
e6350ff834
Initial commit.
2021-02-17 20:53:18 +09:00
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
1b7f3d11e7
wip
2021-02-08 10:57:41 -05:00
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
16d54586c1
remove long read error message
2021-01-27 09:20:45 -08:00
e27dd26dc7
make translate, BEWARE adds the 'world'
2021-01-18 11:26:39 -08:00
07a9593abc
add flow control info to busio_uart_obj_t
2021-01-17 19:33:32 -08:00
ccace62ac9
don't check length for remote characteristic or dedescriptor
2021-01-13 15:35:51 -05:00
a397af9bdf
Round BLE timing values; fix timeout check
2021-01-10 13:16:19 -05:00
c7dc5f2507
support RTS/CTS hardware flow control
2021-01-07 14:13:19 -08:00
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
a11ad25727
BLE fixes
2020-12-23 16:39:27 -05:00
8b7c23c1ee
address review comments
2020-12-01 20:01:14 -05:00
104a089677
deep sleep working; deep sleep delay when connected
2020-11-26 22:06:37 -05:00
a0f1ec3c4a
wip
2020-11-22 19:10:09 -05:00
75559f35cc
wip: ResetReason to microcontroller.cpu
2020-11-21 23:29:52 -05:00
5bb3c321e9
merge from main
2020-11-19 00:29:14 -05:00
66fb095069
Merge pull request #3667 from microDev1/watchdog-s2
...
ESP32S2: Support for WatchDog
2020-11-16 15:01:54 -08:00
ffff02c053
Merge remote-tracking branch 'adafruit/main' into sleep
2020-11-16 12:06:11 -05:00
68eb809fbf
Update parallel bus signatures
2020-11-13 18:57:52 -08:00
10e8b8cf45
move port specific check
2020-11-11 00:24:01 +05:30
930cf14dce
Add check for invalid io, function to disable all alarms
2020-10-27 16:17:26 -07:00
e35938971a
Add description of alarm modules
2020-10-27 16:16:55 -07:00
9fcf96cb64
Replace _bleio.ConnectionError with the native version
...
Replace uses of _bleio.ConnectionError with regular ConnectionError
Fixes #3008
2020-10-07 17:11:32 -07:00
b3bdd4686b
PacketBuffer: add missing 'break's, remove unneeded {}
2020-09-13 15:10:38 -05:00
9e722c8c99
Merge pull request #3375 from DavePutz/issue3296
...
Correction for Issue #3296 - ble hanging on nrf52840
2020-09-10 12:36:17 -07:00
2690faec43
Moved checks for invalid pin to common-hal/microcontroller/Pin.c
2020-09-05 11:42:06 -05:00
ed6cc64c49
Corrected issue with BLE not working on nrf52840
2020-09-04 16:59:41 -05:00
6dbd369272
merge from upstream
2020-08-30 14:39:03 -04:00
8021da08d3
Fix problematic whitespace on pulseout parameter errors
2020-08-27 11:07:47 -04:00
1527a3ce92
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-24 18:25:18 -07:00
644d2ba7a2
Add more "extern" declarations for gcc10 compat
...
gcc has tightened the restrictions on forward declarations that lack
"extern". Fix them up.
2020-08-21 14:39:37 -05:00
a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio
2020-08-21 11:13:53 -07:00
f714f53552
Merge remote-tracking branch 'adafruit/main' into ble_hci
2020-08-21 10:45:05 -04:00
0e30dd8bcc
merge from upstream; working; includes debug_out code for debugging via Saleae for posterity
2020-08-20 20:29:57 -04:00
400701004b
Merge pull request #3279 from hierophect/esp32-pulseinout
...
ESP32-S2: Add PulseOut and PulseIn
2020-08-20 11:24:08 -07:00
6857f98426
Split pulseio.PWMOut into pwmio
...
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.
Fixes #3211
2020-08-18 13:08:33 -07:00
da75445cd5
Style changes, reposition runtime errors
2020-08-18 11:42:06 -04:00
Scott Shawcroft
Scott Shawcroft
Lucian Copeland
jun2sak
Artyom Skrobov
Dan Halbert
Neradoc
Dan Halbert
Jeff Epler
Jonny Bergdahl
gamblor21
Mark
microDev
BiffoBear
Bernhard Boser
root