djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
27,181 Commits 21 Branches 274 Tags 785 MiB
e69397468d
Commit Graph

1057 Commits

Author SHA1 Message Date
Dave Astels
d547d59cba Merge remote-tracking branch 'adafruit/master' into displayio_fill_area 2019-08-21 15:02:51 -04:00
Dave Astels
dcf36db263 Make room 2019-08-21 14:46:10 -04:00
Dan Halbert
e2a4c76a37 make nrf touchio be generic: now available for SAMD51 too 2019-08-18 08:44:10 -04:00
brentru
5a8846d33c remove cruft from prv board 2019-08-08 15:12:01 -04:00
brentru
f87f48ab88 adding pyportal titano board definition 2019-08-08 14:56:28 -04:00
Chris Osterwood
d5658860aa Added pin definition for battery change enable. Pin used to switch in a 10 ohm resistor during Hub reset & strapping. 2019-08-08 14:39:50 -04:00
Chris Osterwood
fb2712410e Merge branch 'master' into capablerobot-usbhub 2019-08-08 14:14:23 -04:00
brentru
1d4700cb6c add pindefs for tft and tft control 2019-08-07 18:29:20 -04:00
brentru
8f6eac98f3 add defs for pyportal titano 2019-08-07 17:10:31 -04:00
Scott Shawcroft
eee759455a
Merge pull request #2018 from keith-packard/snekboard 
Add board support for keithp.com SnekBoard
 2019-07-31 16:38:51 -07:00
Scott Shawcroft
366fdcce18
Merge pull request #2011 from tannewt/ssd1322 
Add knobs for SSD1322 and two displayio fixes.
 2019-07-30 14:15:37 -07:00
Scott Shawcroft
9dd56b1566
Merge branch 'master' into snekboard 2019-07-30 14:12:08 -07:00
wallarug
ecfffac3a8
Delete samd51x19-bootloader-external-flash-crystalless.ld 2019-07-30 19:48:35 +10:00
wallarug
ff6ae1aefb
Update mpconfigboard.mk to use standard linker file 2019-07-30 19:13:33 +10:00
Keith Packard
c6e4ddc88a boards/snekboard: Delete SPI object reference 
Snekboard does not expose any pins for SPI to the user, so delete
the SPI object reference as that won't work.

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:45:52 -07:00
Keith Packard
9a37c8a4b3 boards/snekboard: Add pin aliases for UART and I2C 
Allow users to use TX/RX and SDA/SCL names.

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:45:06 -07:00
Keith Packard
4387ecfdfb Update snekboard PID to official value 
Snekboard has been assigned the following PIDs:

	PID 0x004D  # bootloader
	PID 0x804D  # arduino
	PID 0x804E  # circuitpython

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:15:18 -07:00
Keith Packard
326df70ac2 Fix snekboard names 
Manufacturer -- keithp.com
Product -- snekboard

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:15:18 -07:00
Keith Packard
56f710f64f Add board support for keithp.com SnekBoard 
This is another SAMDG2118A design with built-in 9V motor controllers
that are designed to be used with Lego PowerFunctions devices.

Signed-off-by: Keith Packard <keithp@keithp.com>
 2019-07-29 13:14:37 -07:00
wallarug
dc1eb73ee7
Merge branch 'master' into wallarug-robohat 2019-07-29 21:53:49 +10:00
wallarug
8974c7e843
Added BUTTON to pins.c 2019-07-29 16:37:53 +10:00
wallarug
9e0bea405d
Added BUTTON to pins.c 2019-07-29 16:37:21 +10:00
wallarug
4d30efdc2a
Updated pins.c for GROVE. 2019-07-29 16:29:48 +10:00
wallarug
8838e25cb2
Update pins.c 2019-07-29 16:28:35 +10:00
sommersoft
8eab946c5b
Merge pull request #2003 from C47D/travis_check_new_boards 
Add check to travis to make sure new boards are built, fix #1886
 2019-07-28 22:41:59 -05:00
wallarug
0f30070d58 updated naming schema to match other boards 2019-07-27 17:44:42 +10:00
wallarug
b06fa48735 updated a few files 2019-07-27 16:59:07 +10:00
wallarug
9c57f52d1e updated pins.c for robohat 2019-07-27 16:56:03 +10:00
wallarug
24e84adc6d further robohat cleanups 2019-07-27 16:38:47 +10:00
wallarug
e2b83e2dd9 minor changes robohat d21 2019-07-27 16:36:13 +10:00
wallarug
36008de2ed added custom ld file for samd51 no crystal, ext flash 2019-07-27 16:29:30 +10:00
wallarug
eda3423e35 updated to v1.7 board (samd51) 2019-07-27 16:27:41 +10:00
Scott Shawcroft
c61c874a6d
Reduce feather_m0_supersized build size 
Make it match feather_m0_express
 2019-07-26 00:31:41 -07:00
Scott Shawcroft
a87094e01f
Turn off GC opt to save space on Trinket Haxpress 2019-07-25 22:56:46 -07:00
Scott Shawcroft
4e7de436b4
Update constructors of boards with displays 2019-07-25 22:48:11 -07:00
Scott Shawcroft
1d1b8703b6
Review feedback including NO_BRIGHTNESS_COMMAND macro 2019-07-19 16:11:13 -07:00
Scott Shawcroft
b9b9ef227f
Turn off bitbanging on Hallowing to save code space. 2019-07-19 16:10:33 -07:00
Scott Shawcroft
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth. 
This also improves Palette so it stores the original RGB888 colors.

Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.

Fixes #1828. Fixes #1956
 2019-07-19 16:06:11 -07:00
Kattni Rembor
582acdaa0a Requested changes. 2019-07-09 16:12:24 -04:00
Kattni Rembor
d905958db1 Adding PyRuler to CircuitPython. 2019-07-09 16:02:39 -04:00
jandjstudios
46b7575550 Initial commit to support boards in the datum series. 2019-07-06 13:41:03 -07:00
Chris Osterwood
97e7fea517 Change pin names to be more descriptive 2019-07-04 13:23:57 -04:00
Chris Osterwood
539502c891 Remove pin reservations. Prevents used from inside of CircuitPython code 2019-07-04 13:22:36 -04:00
Radomir Dopieralski
e45eac5016 Switch the terminal font for ugame10 
I designed this really tiny, minimalist font for use on very small
displays. On uGame it lets one see the whole text that CircuitPython
prints on boot. The characters are 4x6 pixels each, and they are
optimized for legibility (large x-height, right angles, blocky shapes).

It might make sense to also use that font in other boards.
 2019-07-01 23:05:07 +02:00
Scott Shawcroft
0cce7fcaa3
Merge remote-tracking branch 'adafruit/4.0.x' into merge_in_402 2019-06-27 14:06:26 -07:00
Scott Shawcroft
fe507db45f
Shrink pIRkey build down. 
Rollback HID to save string space and remove board mapping for
default buses that don't exist.
 2019-06-26 16:49:23 -07:00
Scott Shawcroft
7ad229ec27
Merge pull request #1958 from tannewt/pygamer_advanced 
Add PyGamer Advance and fix Joystick pins
 2019-06-19 12:32:36 -07:00
Scott Shawcroft
5e5252ced0
Merge pull request #1955 from pewpew-game/pygamer-stage 
Add support for PyGamer to Stage library
 2019-06-18 18:23:08 -07:00
Scott Shawcroft
352bf7eaf5
Add PyGamer Advance and fix Joystick pins 2019-06-18 12:22:20 -07:00
Radomir Dopieralski
5803245009 Add support for PyGamer to Stage library 2019-06-18 19:05:51 +02:00
Scott Shawcroft
2dddccb99e
Update board inits for new api. 2019-06-17 18:03:30 -07:00
brentru
ea2c068e11 COLMOD is 1 param, remove CASET/RASET in CircuitPython 2019-06-17 11:20:25 -04:00
brentru
207dc885a6 removed incorrect gamma code, looks better now 2019-06-14 16:34:30 -04:00
brentru
4092294e7c tft working init. sequence, still undersaturated 2019-06-14 16:17:05 -04:00
brentru
0bc74172a2 Add pybadge airlift, sans-tft 2019-06-14 14:46:19 -04:00
Scott Shawcroft
0b1f605a9b
Turn off gc opt for more M0 boards 2019-06-12 13:20:21 -07:00
Scott Shawcroft
eb21fc3e31
Add partial display update support. 
Different operations to the display tree have different costs. Be
aware of these costs when optimizing your code.
* Changing tiles indices in a TileGrid will update an area
covering them all.
* Changing a palette will refresh every object that references it.
* Moving a TileGrid will update both where it was and where it moved to.
* Adding something to a Group will refresh each individual area it
covers.
* Removing things from a Group will refresh one area that covers all
previous locations. (Not separate areas like add.)
* Setting a new top level Group will refresh the entire display.

Only TileGrid moves are optimized for overlap. All other overlaps
cause sending of duplicate pixels.

This also adds flip_x, flip_y and transpose_xy to TileGrid. They
change the direction of the pixels but not the location.

Fixes #1169. Fixes #1705. Fixes #1923.
 2019-06-12 11:32:39 -07:00
Dan Halbert
ba1b36a800 Uncomment vm.c SUPEROPT (debugging typo); trim a few builds 2019-06-12 13:09:09 -04:00
Dan Halbert
1bb4fccc3b Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files 2019-06-12 11:08:22 -04:00
Dan Halbert
0b3f29780a shrink a bunch of builds to fit 2019-06-11 18:46:06 -04:00
Dan Halbert
4fc189b60c Merge latest 4.0.x fixes into master 2019-06-11 16:16:29 -04:00
shazz
9c49af0597 Added pin for SD CS 2019-06-08 12:04:27 -04:00
Elvis Pfützenreuter
1da8d4b4da Add PS/2 support -- ps2io module 2019-06-04 18:05:46 -03:00
Dan Halbert
4e85c1ef91 Implement forced clean builds for boards so designated. 
Mark boards that set CFLAGS_INLINE_LIMIT for particular langauges as needing clean builds.

Fixes #1910.
 2019-05-24 15:32:24 -04:00
Dan Halbert
e84f3b1c6a make crickit cpx pinyin build fit 2019-05-23 21:22:50 -04:00
Dan Halbert
0199d9810b Make pinyin fit on cpx 2019-05-21 15:18:56 -04:00
Dan Halbert
008bbc944c correct USB PIDs for several boards 2019-05-16 10:54:15 -04:00
Scott Shawcroft
f3ab820fc2
Merge pull request #1884 from CapableRobot/capablerobot-usbhub 
Added board definition for Capable Robot Programmable USB Hub
 2019-05-14 13:42:51 -07:00
Chris Osterwood
a0497553fc Fix to prevent critical pins from being reset when MCU restarts or enters REPL 2019-05-14 15:23:33 -04:00
Chris Osterwood
420dbafa9d Added board definition for Capable Robot Programmable USB Hub 2019-05-14 13:28:24 -04:00
sabas1080
9f082ba5cb Fix pin lost 2019-05-13 10:18:53 -05:00
Scott Shawcroft
36e2faf8d2
Merge pull request #1873 from ElectronicCats/escornabot_makech 
Add Escornabot Makech of Electronic Cats
 2019-05-10 12:39:58 -07:00
sabas1080
d174ce8821 Update pins define 2019-05-10 13:34:02 -05:00
Scott Shawcroft
67007282c9
Tighten down inlining on the pIRkey 2019-05-10 11:19:27 -07:00
sabas1080
27ea1df710 Init escornabot 2019-05-08 15:48:17 -05:00
sabas1080
08a170388d fix VID and PID inverted 2019-05-08 10:09:49 -05:00
ladyada
ed8e6e8f45 re-add i2s (its J not G!) 2019-04-29 20:30:53 -04:00
ladyada
fa3a52bc1e similar to pybadge, has pin defs for joystick - comes up with filesys and display so good enough to start hacking :) 2019-04-29 20:29:48 -04:00
wallarug
aa3c28787c removed problem libraries from frozen build. 2019-04-28 00:09:13 +10:00
wallarug
b4a70daf17 updated lots 2019-04-27 22:35:12 +10:00
wallarug
cd4aaa13a3 added robohatmm1 board defs. 2019-04-25 21:13:41 +10:00
ladyada
a5697470e1 fix up pybadge for final release board (swap backlite and reset) 2019-04-23 16:43:20 -04:00
Dan Halbert
0113e0970e add Display.__init__() args for brightness and auto_brightness 2019-04-18 15:59:16 -04:00
Dan Halbert
6684a3c723
Merge pull request #1778 from pewpew-game/gamepad-shift 
Add GamePadShift for handling shift-register-based buttons
 2019-04-17 10:22:24 -04:00
Scott Shawcroft
2fa1bf4351
Merge remote-tracking branch 'adafruit/master' into gamepadshift 2019-04-16 11:23:41 -07:00
Scott Shawcroft
f58446e937
Merge branch 'master' into master 2019-04-16 10:32:38 -07:00
ITACA Innovation S.R.L
2d303213ed Add files via upload 2019-04-16 16:50:54 +02:00
ITACA Innovation S.R.L
4f5a7ffe46 Updates: VID&PID, pinout 
Changed VID & PID to new ones.
Changed the layout accordingly to the prototype version.
 2019-04-16 16:45:47 +02:00
Scott Shawcroft
c927e6b938
Split GamePadShift from GamePad to save space on most boards. 2019-04-15 15:40:06 -07:00
Scott Shawcroft
22889ca29a
Merge pull request #1790 from pewpew-game/pybadge-stage 
Enable _stage module and freeze stage library on the PyBadge
 2019-04-15 14:25:50 -07:00
Radomir Dopieralski
ade6bd8185 Enable _stage module and freeze stage library on the PyBadge 2019-04-15 14:38:02 +02:00
siddacious
5135ee52d9 Changing to support for CP32-M4 wrover 2019-04-14 19:45:44 -07:00
Radomir Dopieralski
eeef5359f9 Merge branch 'master' into gamepad-shift 2019-04-13 11:54:25 +02:00
Dan Halbert
f8473f4a39
Merge pull request #1788 from tannewt/pinyin 
Add Chinese (Pinyin) and slim down boards so it fits
 2019-04-12 20:36:59 -04:00
Scott Shawcroft
defc6dceb0
Slim down feather m0 express 2019-04-12 16:18:08 -07:00
Scott Shawcroft
796fc3f5ab
Update font location and shrink a bunch of builds 2019-04-12 15:25:48 -07:00
Scott Shawcroft
c064deaaf5
Merge pull request #1785 from pewpew-game/ugame-displayio 
Enable displayio for the ugame10 board
 2019-04-12 13:26:51 -07:00
Scott Shawcroft
7161038d6b
Turn off displayio because it is a satellite 2019-04-12 11:54:32 -07:00
Radomir Dopieralski
0599286e32 Use never_reset in ugame10 2019-04-12 20:45:52 +02:00
Radomir Dopieralski
947662415c Disable gamepad for feather_m0_express_crickit 2019-04-12 20:43:29 +02:00
Max Holliday
41499ac315
No I2S on G19 2019-04-12 10:06:17 -07:00
Max Holliday
e85b6fb83c
adding kicksat-sprite board 
See https://github.com/RoboticExplorationLab/sprite for details
 2019-04-12 10:06:17 -07:00
Radomir Dopieralski
dabbded622 Got back to using Display object in the Stage library 2019-04-12 11:19:19 +02:00
Radomir Dopieralski
c3136f4f32 Enable displayio for uGame10 board 
Also, make the _stage library work with the fourwire bus, to re-use the
display.
 2019-04-12 01:10:57 +02:00
Radomir Dopieralski
5603d0cd38 Configure the TFT spi to 24MHz by default 
That is (slightly) out of spec for the display, but it works reliably.
 2019-04-11 15:47:26 +02:00
Scott Shawcroft
9f4f689879
Free up space in Itsy Bitsy M0 by limiting inline. 2019-04-10 14:09:14 -07:00
ladyada
894c1e9590 Rev D/E (beta) hardware! 2019-04-10 08:37:20 -04:00
Dan Halbert
203d795bd6
Merge pull request #1772 from tannewt/fix_gc_never_free 
Check that a never free pointer is on the heap.
 2019-04-10 08:26:37 -04:00
Scott Shawcroft
44e32506ed
Don't make Pins for those not connected on Itsy M0 2019-04-10 00:06:59 -07:00
Dan Halbert
c0c809ad4b Fix version skew for bast_pro_mini build 2019-04-09 22:52:53 -04:00
Dan Halbert
d8763debf5
shrink sparkfun_lumidrive build 2019-04-09 21:23:28 -04:00
Dan Halbert
fc9cb038c4
Merge pull request #1715 from ElectronicCats/master 
Added Bast Pro Mini M0
 2019-04-09 20:53:05 -04:00
Scott Shawcroft
129e725599
Merge branch 'master' into master 2019-04-09 14:40:36 -07:00
Scott Shawcroft
0e98eeb63b
Turn off touchio on pIRkey and add back usb midi. 
USB MIDI was still being compiled in mostly anyway. There is no
place to touch on the board so touchio is useless.
 2019-04-09 12:36:14 -07:00
Scott Shawcroft
ef23ffe584
Turn off audiobusio on Hallowing to free rom 
It is about 5kb and the pins aren't broken out for it anyway.
 2019-04-09 12:01:00 -07:00
Scott Shawcroft
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display 2019-04-08 17:15:08 -07:00
Scott Shawcroft
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module. 2019-04-08 16:58:50 -07:00
Radomir Dopieralski
8323721232 Stop hard-coding SPI frequency in FourWire 
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
 2019-04-06 15:15:29 +02:00
Scott Shawcroft
7686f93ef4
Fix crash when getting board.SPI outside the VM 
If one of the default pins was already in use it would crash.

The internal API has been refined to allow us to get the value
without causing an init of the singleton.

Fixes #1753
 2019-04-05 19:06:37 -07:00
Melissa LeBlanc-Williams
36b10104d6 Adjusted inline limit to fix Hallowing PL build 2019-04-05 12:17:16 -07:00
Melissa LeBlanc-Williams
7872a33f8b Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1331 2019-04-05 11:10:02 -07:00
Dan Halbert
50d72ed993 shrink sparkfun_lumidrive to make room for large translations 2019-04-05 11:23:47 -04:00
Melissa LeBlanc-Williams
af3d809980 Updated boards files with displays 2019-04-04 23:18:15 -07:00
Dan Halbert
b5bc8b3fc2
Merge pull request #1745 from dhalbert/rotaryio-typo-eic-refactor 
ROTARYIO_MODULE typo; EIC interrupt handler refactor
 2019-04-04 23:53:46 -04:00
Dan Halbert
682e83a63c Turn off rotaryio on pewpew10 so de_DE will fit 2019-04-04 20:28:32 -04:00
Dan Halbert
29df5930dd #if EIC handlers; turn off rotaryio in pirkey for space reasons 2019-04-04 16:48:38 -04:00
Sabas
19c6b8aa0c
Merge branch 'master' into master 2019-04-02 23:15:56 -06:00
Dan Halbert
709de9ce9f
Merge pull request #1732 from ladyada/master 
add airlift lite - samd51j19 + 2MB QSPI
 2019-04-02 17:11:59 -04:00
Dan Halbert
10e35f30f0 shrink inline-limit to allow large Hallowing translation to fit 2019-04-01 12:18:25 -04:00
ladyada
8159272a8b remove old comment 2019-03-31 23:17:19 -04:00
ladyada
89cf60eac3 add airlift lite - samd51j19 + 2MB QSPI 2019-03-31 19:20:15 -04:00
sabas1080
bb7bb80b4a update bast pro mini m0 2019-03-30 15:28:23 -06:00
Melissa LeBlanc-Williams
8087cb41e5 Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix 2019-03-27 20:18:37 -07:00
Dan Halbert
88068876ed turn off frequencyio for all SAMD21 builds 2019-03-27 17:54:36 -04:00
Dan Halbert
df79e9a732
Merge pull request #1687 from jrcutler/master 
Enable nvm storage for all samd21x18 boards
 2019-03-27 11:10:22 -04:00
Melissa LeBlanc-Williams
f4cede4747 Removed parameter so CS is always toggled 2019-03-26 18:46:13 -07:00
Melissa LeBlanc-Williams
b2ad16f5c8 Removed parameter so CS is always toggled 2019-03-26 18:34:07 -07:00
Melissa LeBlanc-Williams
5f0e71ccb4 Merge branch 'master' of https://github.com/adafruit/circuitpython into ssd1351-fix 2019-03-26 18:23:02 -07:00
Melissa LeBlanc-Williams
0df40534f3 Merge branch 'master' of https://github.com/adafruit/circuitpython 2019-03-26 18:22:30 -07:00
ITACA Innovation S.R.L
74c5705a9a
Update mpconfigboard.mk 2019-03-25 17:19:40 +01:00
ITACA Innovation S.R.L
994f292b3b
Rename ports/atmel-samd/boards/uChip/pins.c to ports/atmel-samd/boards/uchip/pins.c 2019-03-25 15:59:22 +01:00
ITACA Innovation S.R.L
5ed11ddfc3
Rename ports/atmel-samd/boards/uChip/mpconfigboard.mk to ports/atmel-samd/boards/uchip/mpconfigboard.mk 2019-03-25 15:59:00 +01:00
ITACA Innovation S.R.L
dfc5602fa0
Rename ports/atmel-samd/boards/uChip/mpconfigboard.h to ports/atmel-samd/boards/uchip/mpconfigboard.h 2019-03-25 15:58:37 +01:00
ITACA Innovation S.R.L
af04307c83
Rename ports/atmel-samd/boards/uChip/board.c to ports/atmel-samd/boards/uchip/board.c 2019-03-25 15:57:35 +01:00
ITACA Innovation S.R.L
4886451000
Add files via upload 
This is a pull request to add support for uChip into the Circuitpython environment.

We tested the uploaded code and it seems to work with Circuitpython.
If there are any suggestions or changes needed, please let us know!


What is uChip in brief?
A complete USB dev board the size of a narrow 16-DIP package, featuring Atmel SAMD21 Cortex M0+ and onboard switching converters. (OTG compliant and power delivery up to 1A@5V or 3V3).
For more details refer to the ongoing campaign on kickstarter.
www.kickstarter.com/projects/1186620431/uchip-arduino-zero-compatible-in-a-narrow-dip-16-p
 2019-03-25 13:06:31 +01:00
Melissa LeBlanc-Williams
c3329e224d Added Single Byte Boundaries option for certain displays 2019-03-24 23:59:28 -07:00
Justin R. Cutler
41f4f269f1 Disable frequencyio support for samd21-based catwan_usbstick target. 2019-03-24 14:22:23 -04:00
Justin R. Cutler
d6c7bda6d1 Enable 256b of nvm storage for all samd21x18-bootloader.ld boards. 2019-03-24 12:02:07 -04:00
Melissa LeBlanc-Williams
0c33f7fdb4 Enable CS toggle for displayio by default 2019-03-23 20:23:23 -07:00
Melissa LeBlanc-Williams
d2a0ec28a0 Fixed display init on boards with displays 2019-03-23 19:32:15 -07:00
Dan Halbert
eca23a7279 remove i2cslave from feather m0 crickit 2019-03-20 15:38:52 -04:00
Dan Halbert
fbf166af1a enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit 2019-03-20 14:36:24 -04:00
Radomir Dopieralski
a50ee4f650 Add frozen stage module to ugame10 board 
And also ignore some more pins.

This is needed for the builds on the circuitpython.org to be functional.
 2019-03-17 14:03:50 +01:00
Scott Shawcroft
e05ab64398
Squeeze down the feather crickit build 2019-03-13 17:20:18 -07:00
Scott Shawcroft
96a924f5f0
Turn off networking on M0s. 
It takes 10k of code space and isn't very useful because of the
M0's limited RAM. Disabling it allows us to add other things.
 2019-03-12 17:18:30 -07:00
Scott Shawcroft
2e500a8a29
Copy inline setting on feather m0 express that the metro has. 2019-03-12 14:06:01 -07:00
Scott Shawcroft
b1c572e82e
Fixup the pybadge definition so the screen works. 2019-03-12 11:18:29 -07:00
John Reese
ef4a74e201
Add basic Pybadge board definition 
Currently boots on board and can connect to REPL,
but does not appear as mountable drive in OS.
Starting REPL gives the following error message:

```
You are running in safe mode which means something unanticipated happened.
Looks like our core CircuitPython code crashed hard. Whoops!
Please file an issue at https://github.com/adafruit/circuitpython/issues
 with the contents of your CIRCUITPY drive and this message:
Crash into the HardFault_Handler.
```
 2019-03-12 11:12:35 -07:00
Scott Shawcroft
8f57606513
Merge pull request #1635 from caternuson/iss1634_SPEAKER 
add SPEAKER pin alias for PyPortal
 2019-03-11 19:16:01 -07:00
caternuson
46fc8a8a86 change order so SPEAKER is first 2019-03-11 17:45:27 -07:00
caternuson
53b7055283 add SPEAKER pin alias for PyPortal 2019-03-11 15:12:29 -07:00
Radomir Dopieralski
caf51cf4eb Add default devices and tweak brightness in boards/pewpew10 2019-03-11 19:09:21 +01:00
Dan Halbert
26ed411936 Shrink build so de_DE fits 2019-03-07 07:47:18 -05:00
sommersoft
2cd6a79016 better handle frequencyio inclusion 2019-03-01 22:46:57 -06:00
Dan Halbert
17bf2afa41
Merge pull request #1607 from pewpew-game/pewpew10.x-4.x 
Add support for PewPew 10.x boards
 2019-03-01 14:07:32 -05:00
Radomir Dopieralski
2bfafd1fc9 Enable math for pewpew10 2019-03-01 16:55:54 +01:00
Radomir Dopieralski
5d85d54026 Move the frozen pew.py into a submodule 2019-03-01 16:24:22 +01:00
Radomir Dopieralski
89b2788d11 Apply review fixes: 
* fix formatting
* fix copyrights
* fix CIRCUITPYTHON_GAMEPAD guards
* add CIRCUITPYTHON_PEW guards to reset
* fix module list order
 2019-03-01 16:05:15 +01:00
Radomir Dopieralski
3826ca4194 Rename internal pins to add underscore in front 2019-03-01 15:10:43 +01:00
Radomir Dopieralski
18870255ea Remove the pewpew70 board definition, leave only pewpew10 2019-03-01 15:06:24 +01:00
Dan Halbert
fb027f2024 Update PyPortal pins to rev C 2019-03-01 09:06:03 -05:00
Radomir Dopieralski
45fea86554 Rebase on top of CircuitPython 4.x 2019-03-01 14:59:21 +01:00
Radomir Dopieralski
59f63eaef6 Handle new buttons 2019-02-28 23:34:03 +01:00
Radomir Dopieralski
55b511a5d8 Use a dedicated timer 2019-02-28 23:33:37 +01:00
Radomir Dopieralski
7ac11ed8e1 Enlarge the usb disk 2019-02-28 23:25:18 +01:00
Radomir Dopieralski
5a1e69f5b8 Correct a typo in the pin name 2019-02-28 23:23:26 +01:00
Radomir Dopieralski
a41ea27596 Add pewpew70 board 2019-02-28 23:23:26 +01:00
Bryan Siepert
3afcd3f5bc another/different size tweak for the DE hallowing build 2019-02-23 20:18:22 -08:00
Bryan Siepert
2cb31ea546 Merge branch 'master' into bmp_bitdepths 2019-02-23 20:16:57 -08:00
Bryan Siepert
3843e96edc Tweaking German hallowing build for size 2019-02-23 19:47:58 -08:00
ladyada
85421f9766 final pin names, tested with final release 2019-02-23 15:40:28 -05:00
Dan Halbert
0dc2600587
Merge pull request #1552 from tannewt/onsdbitmap 
Fix displaying images off of SD cards.
 2019-02-19 19:28:53 -05:00
Scott Shawcroft
3e24b9668e
Merge pull request #1573 from dhalbert/reset-analogout 
Fix #ifdefs in port.c to call xxx_reset() routines properly. Remove most uses of EXPRESS_BOARD.
 2019-02-19 16:14:33 -08:00
Scott Shawcroft
53fa65e318
Speed up pyportal by writing memory on the same access as our rotation. 2019-02-19 14:51:39 -08:00
Dan Halbert
4e75aaecd0
Merge pull request #1569 from TG-Techie/patch-7 
PYPORTAL:make it easier for people to hookup in spi mode
 2019-02-19 14:12:30 -05:00
Dan Halbert
9c24c804fb Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD. 2019-02-18 22:44:31 -05:00
TG-Techie
d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic 2019-02-18 15:00:14 -05:00
Dan Halbert
339a22752b Remove rtc from pirkey_m0 to make TRANSLATION=fr fit 2019-02-18 09:02:26 -05:00
Dan Halbert
cf545cd477 WIP: fix issues with remaining atmel-samd builds 2019-02-15 09:52:45 -05:00
Dan Halbert
5154e0581e WIP: atmel-samd trinket build works 2019-02-15 00:28:20 -05:00
TG-Techie
e901317fd7
PYPORTAL: pindefs incorrect 
@jerryneedell  suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works! 

used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
                                      board.TOUCH_YD, board.TOUCH_YU,
                                      calibration=((5200, 59000), (5800, 57000)),
                                      size=(320, 240))

while True:
    p = ts.touch_point
    if p:
        time.sleep(.5)
        print(p)
```
 2019-02-12 22:18:36 -05:00
Scott Shawcroft
70f40a03cb
Rotate pyportal screen to be correct 2019-02-12 13:53:27 -08:00
Scott Shawcroft
b4306314aa
Move terminal font to terminalio from board. 2019-02-12 10:10:02 -08:00
Scott Shawcroft
c17f147be9
A variety of displayio improvements 
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
  a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
 2019-02-11 20:55:05 -08:00
Max Holliday
2e48739a4e standardizing on "BATTERY" pin; and load-leveling Travis 2019-02-06 10:50:57 -08:00
Max Holliday
4c1b85cdcd elaborating on include path for board_busses 2019-02-05 20:21:54 -08:00
Max Holliday
30fcb14017 correcting VID/PID and adding sam32 to travis 2019-02-05 19:20:43 -08:00
Max Holliday
a2936c4c20 adding SAM32 board 
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
 2019-02-05 17:22:34 -08:00
Scott Shawcroft
90e5964703
Set auto brightness on by default for boards with displays built in. 2019-02-03 13:42:03 -08:00
Scott Shawcroft
03068a9388
Fix built-in inits and terminal allocate 2019-02-01 01:00:10 -08:00
Scott Shawcroft
ec03887040
Fix hallowing and nrf builds 2019-01-31 11:42:15 -08:00
Scott Shawcroft
601a910f4e
More improvements to Terminal: 
* Fix Hallowing.
* Fix builds without displayio.
* Fix y bounds that appears as untrollable row of pixels.
* Add scrolling to TileGrid.
* Remove Sprite to save space. TileGrid is a drop in replacement.
 2019-01-31 11:42:14 -08:00
Scott Shawcroft
69bc5e189b
Rudamentary backlight support 2019-01-31 11:42:14 -08:00
Scott Shawcroft
39240516f3
Correct pin capitalization 2019-01-31 09:11:30 -08:00
Scott Shawcroft
3225878f63
for redboard turbo too 2019-01-30 22:55:36 -08:00
Scott Shawcroft
fe2a092f1c
Fix board_bus location 2019-01-30 22:54:26 -08:00
Elias Santistevan
b124071e10 Removes a lot of left over comments, adds lumidrive and redboard turbo to travis.yml 2019-01-30 16:13:08 -07:00
Elias Santistevan
178cfc1623 Adds make config files for SparkFun LumiDrive and Redboard Turbo 2019-01-30 13:50:29 -07:00
Scott Shawcroft
07b96fa15d
Merge pull request #1495 from TG-Techie/patch-3 
fixed compiling error for datalore ip m4
 2019-01-27 14:07:16 -08:00
Scott Shawcroft
de2861969b
Merge pull request #1494 from TG-Techie/patch-2 
add displayio to TG-Techie's first board
 2019-01-27 14:06:47 -08:00
ShawnHymel
dd5165c92c Added support for SparkFun SAMD21 Dev 2019-01-25 12:27:31 -06:00
TG-Techie
468faf4e2b
fixed compiling error 2019-01-25 12:42:43 -05:00
TG-Techie
e9538dbc7f
add displayio to TG-Techie's first board 2019-01-25 12:06:05 -05:00
Scott Shawcroft
aaa644b223
Skip displayio on crickit builds and cpx build due to lack of space. 2019-01-22 18:49:37 -08:00
Scott Shawcroft
f43379c771
No pixelbuf on Hallowing 2019-01-22 14:38:34 -08:00
Scott Shawcroft
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD 2019-01-22 14:02:07 -08:00
Roy Hooper
50af08a6f3 Merge branch 'master' into pixelbuf 2019-01-19 16:33:59 -05:00
Scott Shawcroft
ae52c964c2
Cleanup display rework for PR. 
Fixes #1465. Fixes #1337. Fixes #1168
 2019-01-18 13:47:40 -08:00
Scott Shawcroft
41dad1ea1e
Fix pin defs 2019-01-18 11:43:35 -08:00
Scott Shawcroft
2d136d58bf
Fix other builds and hallowing 2019-01-17 14:45:29 -08:00
Scott Shawcroft
5277138c99
pyportal compiles and tweak blinka colors 2019-01-17 10:57:05 -08:00
Scott Shawcroft
84292ad890
External fourwire works and blinka splash after 2019-01-17 00:20:16 -08:00
Scott Shawcroft
05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel. 2019-01-16 12:05:20 -08:00
ladyada
19b6c5c802 more pins! 2019-01-16 01:49:12 -05:00
TG-Techie
f667d4d887
Update mpconfigboard.mk 
oops, forgot to change those when i copied the folder
 2019-01-14 14:43:34 -05:00
Roy Hooper
ffe734edf7 Fresh combined checkin of _pixelbuf library. 2019-01-13 23:51:13 -05:00
TG-Techie
ef6c9e7df6 removed commented code 2019-01-12 23:19:40 -05:00
TG-Techie
309a02efa1 added datalore ip m4 to boards 2019-01-12 23:06:12 -05:00
Dan Halbert
5f9980fb6b support winbond 8MB chips on all boards that might use them 2019-01-12 13:24:35 -05:00
Scott Shawcroft
b2cec6275c
Fix screen rotation and reset pin 2019-01-11 00:10:41 -08:00
Scott Shawcroft
19db886645
Support the display on the pyportal. 
Also fix #1390, reload during sleep broken.
 2019-01-10 17:29:34 -08:00
Shawn Hymel
bbf77a7efb
Merge branch 'master' into master 2019-01-10 12:50:05 -06:00
ShawnHymel
5c15a19c32 Added SparkFun SAMD21 Mini port 2019-01-09 16:12:43 -06:00
Scott Shawcroft
d3aeca104e
Initial pass at pyportal board define. 2019-01-07 14:56:54 -08:00
Scott Shawcroft
69bb4ae670
Merge pull request #1397 from ShawnHymel/master 
Added board support for Arduino MKR Zero
 2018-12-11 13:09:27 -08:00
Scott Shawcroft
29f9794dcf
Curly brace change to make it more consistent 
And to queue Travis
 2018-12-11 11:57:52 -08:00
ShawnHymel
4c81d9a9ac Added SD_CD pin definition 2018-12-08 17:40:46 -06:00
Scott Shawcroft
6ef8639971
Rework safe mode and have heap overwrite trigger it. 
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.

The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.

A couple NeoPixel fixes are included for the nRF52 as well.

Fixes #1034. Fixes #990. Fixes #615.
 2018-12-06 14:24:20 -08:00
Scott Shawcroft
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build 2018-12-04 18:20:48 -08:00
ShawnHymel
3d597aae92 Added MKR Zero board definition. 2018-12-02 18:07:19 -06:00
Scott Shawcroft
9aebe2f1ef
Merge branch 'master' into master 2018-11-30 20:49:55 -08:00
Scott Shawcroft
c55183f71a
Merge remote-tracking branch 'adafruit/master' into gc_rev_b 2018-11-30 15:09:15 -08:00
Scott Shawcroft
48928d4b25
Auto build and a couple pin fixes 2018-11-30 15:08:06 -08:00
Scott Shawcroft
77760090e2
Fix up spi flash define 2018-11-30 14:55:06 -08:00
Scott Shawcroft
95e0309263
Merge remote-tracking branch 'adafruit/master' into mini_sam 2018-11-30 14:40:01 -08:00
sabas1080
1da2425612 Add Electronic Cats CatWAN USB Stick 2018-11-26 14:39:58 -06:00
Scott Shawcroft
7d1a62e4ba
Update for Grand Central Rev B 2018-11-20 10:54:13 -08:00
Benjamin Shockley
acb9bd7618 Cleanup for Mini SAM M4 Only 
Remvoed older files and cleaned up repository to reflect changes for Mini SAM M4.
 2018-11-16 09:46:08 -06:00
Dan Halbert
11de8fdca7 merge 3.x swap of /lib and .frozen; update frozen libs 2018-11-15 15:00:23 -05:00
Scott Shawcroft
4ae4cc11e0
Clear Trellis NeoPixels on board reset. 
This makes it easier to change code in cases where the pixels may
cause a brownout.
 2018-11-13 11:27:18 -08:00
Scott Shawcroft
43f7ca7985
Incorporate feedback: 
* Clean up board defines.
* Add flush on eject and stay ejected.
* Swith back to NONE protocol for CDC.
 2018-11-09 11:33:56 -08:00
Scott Shawcroft
688f0e388b
Update MKR1300 board definition too 2018-11-09 00:49:02 -08:00
Scott Shawcroft
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash. 
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.

Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
 2018-11-08 17:25:30 -08:00
Scott Shawcroft
6aca9762c9
Merge pull request #1313 from siddacious/master 
adding support for the CP32-M4
 2018-11-04 11:26:14 -08:00
Dan Halbert
a15ed0b912 Fix Trellis M4 DotStar pin assignments. 2018-11-04 00:07:42 -04:00
ATMakersBill
bd4188a092 adding changes to mpconfigboard.mk to reduce memory usage on CPX per @danh 2018-11-03 14:42:27 -04:00
Dan Halbert
4dfba2f8ac put .frozen before /lib in sys.path; update frozen libraries 2018-11-01 19:57:10 -04:00
Bryan Siepert
844b674a1e adding support for the CP32-M4 2018-11-01 09:42:48 -07:00
Dan Halbert
bd79c0c0de
Merge pull request #1295 from ElectronicCats/mkr1300 
Add board MKR1300 by Arduino
 2018-10-26 20:15:20 -04:00
Benjamin Shockley
aec39fd027 Updated to new D21G18 MCU 
Updated MIni SAM M0 to new D21G18A MCU to match layout/design of M4
 2018-10-26 12:09:59 -05:00
Nick Moore
f6482699a0 Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native 2018-10-25 12:20:50 +11:00
sabas1080
f0d7073a12 Add Arduino MKR1300 2018-10-22 19:38:24 -05:00
Benjamin Shockley
5d190a5615
Update mpconfigboard.h 
Corrected NVM size.
 2018-10-19 21:18:19 -05:00
Benjamin Shockley
548e6893cd
Create pins.c 2018-10-19 21:16:21 -05:00
Benjamin Shockley
88fd5d7daa
Create mpconfigboard.mk 2018-10-19 21:15:50 -05:00
Benjamin Shockley
1593f4e3a8
Create mpconfigboard.h 2018-10-19 21:14:46 -05:00
Benjamin Shockley
6d974593c7
Create board.c 2018-10-19 20:52:23 -05:00
Scott Shawcroft
b436666e85
Merge pull request #1272 from sajattack/battery 
add pin def for BAT
 2018-10-17 12:15:38 -07:00
Paul Sajna
089e2cc099 remove BATTERY from itsybitsy 2018-10-16 14:55:21 -07:00
sabas1080
c103a05579 Add board Meow Meow by Electronic Cats 
https://github.com/ElectronicCats/MeowMeow
 2018-10-15 19:17:04 -05:00
Paul Sajna
1447df3fa6 change BAT to BATTERY 2018-10-14 23:34:49 -07:00
Paul Sajna
f1028b5f96 add pin def for BAT 2018-10-13 15:53:22 -07:00
Nick Moore
8d75c3d339 Changed to only build wiznet for {feather|metro}_m[04]_express 2018-10-11 13:42:26 +11:00
Scott Shawcroft
b5e26130d7
Support rev D for the Trellis M4 Express 2018-10-10 11:21:35 -07:00
Benjamin Shockley
2ef29c2cec
Changed FLASH DEVICE 
Changed the flash device to W25Q16JV_IM - the type actually used.
 2018-10-04 21:14:07 -05:00
Scott Shawcroft
3c743f2664
Update Trellis M4 Express for Rev C 2018-10-02 11:56:09 -07:00
Benjamin Shockley
1f3a3fe5a0 Merge remote-tracking branch 'upstream/master' 2018-10-01 12:28:42 -05:00
Benjamin Shockley
862d5a06fd
Create pins.c 2018-09-29 23:33:07 -05:00
Benjamin Shockley
8e52d922cc
Create mpconfigboard.mk 2018-09-29 23:26:15 -05:00
Benjamin Shockley
5ab4f09b2f
Create mpconfigboard.h 2018-09-29 23:24:32 -05:00
Benjamin Shockley
4acca8b90b
Update board.c 2018-09-29 23:17:24 -05:00
Benjamin Shockley
13364f90fe
Create board.c 2018-09-29 23:16:07 -05:00
Scott Shawcroft
3f380ded6b
Merge pull request #1197 from dhalbert/3.x-master 
3.x master
 2018-09-19 09:58:52 -07:00
Dan Halbert
8172a2ca9d
Merge pull request #1189 from arofarn/add-BATTERY-pin 
Add VOLTAGE_MONITOR pin to feather boards pins
 2018-09-18 21:47:09 -04:00
Dan Halbert
bc510e714f merge 3.0.2 to master 2018-09-18 15:38:12 -04:00
Dan Halbert
aaa61d06e3 add D4 and D3 aliases for EXTERNAL_NEOPIXEL and SENSE pins to match final silkscreen 2018-09-17 22:22:23 -04:00
Pierrick C
53853289eb Move VOLTAGE_BATTERY line just under D9 line 2018-09-14 09:02:04 +02:00
ladyada
521a14e942 add mic in / out 2018-09-13 21:50:43 -04:00
ladyada
994c066b21 rev B (minus microphone) 2018-09-13 21:34:39 -04:00
ladyada
bec42671b1 missin' reset pin for the radio. tested works. 2018-09-13 21:30:13 -04:00
ladyada
28aabb4d5c trellis m4 variant 2018-09-13 21:30:13 -04:00
Pierrick C
8eda4bb473 Add VOLTAGE_MONITOR alias for D9 pin to feather boards 2018-09-13 23:36:04 +02:00
Benjamin Shockley
b923324e73
Added HW NEOPIXEL Definition 
Added definition for the built-in Neopixel.  This is useful for CircuitPython Statas: https://learn.adafruit.com/welcome-to-circuitpython/troubleshooting#circuitpython-rgb-status-light-18-10
 2018-09-12 07:59:07 -05:00
Benjamin Shockley
08a2d962e3
Delete README.md 2018-09-10 17:01:31 +00:00
Benjamin Shockley
b2f5511de2
Initial Upload of Mini SAM M0 
Initial Upload of Mini SAM M0
 2018-09-10 17:01:00 +00:00
Benjamin Shockley
b03037e512
Create README.md 2018-09-10 16:55:55 +00:00
Dan Halbert
34bcb069cf
Merge pull request #1165 from tannewt/grandcentral 
Initial Grand Central definition
 2018-09-07 15:00:13 -04:00
Scott Shawcroft
3ac03a31d8
Fix SDA/SCL 2018-09-07 10:39:18 -07:00
Scott Shawcroft
32c616b5dd
Initial Grand Central definition 
It has a ton of pins in a Mega form-factor

This also includes a change to init the stack earlier. It fixes
a crash that occurs if the flash doesn't start correctly and the
original spot isn't reached.
 2018-09-06 16:54:13 -07:00
Scott Shawcroft
c2e49dc87f
Merge remote-tracking branch 'adafruit/master' into hallowing 2018-09-06 14:54:55 -07:00
Scott Shawcroft
1683eb913d
Minor tweaks based on feedback 2018-09-06 14:49:49 -07:00
Dan Halbert
9ea809bef7 add pin claiming to devices 2018-08-31 18:38:05 -04:00
Dan Halbert
585597a252 pin files rework; implement pin claiming; add more boards 2018-08-31 18:05:55 -04:00
Scott Shawcroft
121903b6ee
Tweaks based on feedback 2018-08-31 14:21:48 -07:00
Scott Shawcroft
6697544cdf
Introduce displayio to render graphics to displays. 
It's designed to minimize RAM footprint by using Sprites to
represent objects on the screen. The object model also facilitates
partial screen updating which reduces the bandwidth needed to display.

This is all handled in C. Python simply manipulates the objects with
the ability to synchronize to frame timing.
 2018-08-31 12:31:52 -07:00
Scott Shawcroft
2b6b0ffcd2
Remove HID from hallowing so we have more room for other stuff. 2018-08-20 18:04:35 -07:00
ladyada
aeeb40e02c
Change hallowing to shipping flash type W25Q64JV-IQ. tested! 2018-08-20 10:52:33 -07:00
Dan Halbert
1768057e87
add HalloWing 2018-08-20 10:52:24 -07:00
Noralf Trønnes
11cbeb87ad ports/atmel-samd: Implement i2cslave.I2CSlave 
This adds support for SAMD acting as a I2C slave in polled mode.
 2018-08-16 17:20:49 +02:00
ladyada
d8f2a61c39 Change hallowing to shipping flash type W25Q64JV-IQ. tested! 2018-08-14 13:04:33 -04:00
Scott Shawcroft
94c5ceab36
Initial SAMR board revision. 2018-08-09 05:36:46 -07:00
Dan Halbert
680597547c add HalloWing 2018-07-29 19:22:16 -04:00
Dan Halbert
bf9981e8db bring all frozen libraries up to date 2018-07-03 14:39:21 -04:00
Dan Halbert
1f3de5174e Freeze Adafruit_CircuitPython_Crickit into crickit builds 2018-06-26 19:49:55 -04:00
jerryneedell
de4cd1ee73 add pins D3/D4 to pins.c 
fixes  #948
 2018-06-20 22:26:59 -04:00
Scott Shawcroft
769788d3c7 Turn off USB pin objects since they are always used for USB. 2018-06-08 12:56:32 -07:00
Kattni Rembor
ba7e0e2f86 Add Adafruit to other M4 board name strings 2018-06-07 13:39:04 -04:00
Kattni Rembor
7b2875d54a Add Adafruit to board name string 2018-06-07 13:33:13 -04:00
Kattni Rembor
0ab2a60dcd Update ItsyBitsy board name to one word 2018-06-07 13:12:44 -04:00
Dan Halbert
9ba6990228 Feather M0 Express build with Crickit libraries 2018-06-05 18:21:47 -04:00
Dan Halbert
7e7e33e460 add PA14 as D4 to Feather M4 Exprses 2018-06-05 08:15:34 -04:00
Scott Shawcroft
fd71e56891 atmel-samd: Re-org helper peripheral files into their own subdirectory. 
Ideally in the future they won't depend on ASF4 or MicroPython.
 2018-06-01 15:07:31 -07:00
Noralf Trønnes
e158702a68 atmel-samd/samd51: Use crystal for RTC 
This uses the crystal to clock the RTC on boards which have a crystal.

Disable clock generator 2 which was enabled in commit
8e2080411f ("atmel-samd: Add rtc module support").
samd51 differs from samd21 when it comes to the RTC clock. samd51 doesn't
have an explicit clock peripheral so no need for a clock generator.

The same commit didn't even setup XOSC32K correctly, it missed EN1K and XTALEN.

The RTC uses the 1k clock output, so enable it on the OSCULP32K even if it works without it.
 2018-06-01 18:03:23 +02:00
Dan Halbert
eab8e43188 rev E feather M4 express; remove named AREF pins 2018-05-29 20:25:28 -04:00
Dan Halbert
b9f36184f5 refine pirkey build 2018-05-24 13:28:03 -04:00
Dan Halbert
083f91363a pirkey APA102 defs were commented out in mpconfigboard.h 2018-05-23 18:21:07 -04:00
Dan Halbert
22405d6bdb
Merge pull request #860 from dhalbert/3.0-cpx-crickit 
turn off longint on cpx crickit; update frozen libs
 2018-05-22 16:28:42 -04:00
Scott Shawcroft
165b28438a
Merge pull request #854 from python-ugame/extra-override 
Allow overriding EXTRA_BUILTIN_MODULES in mpconfigboard.h
 2018-05-22 10:22:35 -07:00
Dan Halbert
0d7db29630 turn off longint on cpx crickit; update frozen libs 2018-05-22 13:03:13 -04:00
Dan Halbert
45db48bbaa make longint choice mechanism more readable 2018-05-22 08:04:14 -04:00
Dan Halbert
5680933483 refactor longint settings; make crickit cpx build 2018-05-21 23:58:03 -04:00
Radomir Dopieralski
6a6ab2b0ec Allow overriding EXTRA_BUILTIN_MODULES in mpconfigboard.h 
Some boards (like the uGame10) may want to have their own set of extra
modules. This change lets them override EXTRA_BUILTIN_MODULES in their
mpconfigboard.h and makes the ugame10 board do that.
 2018-05-21 09:23:58 +02:00
Noralf Trønnes
cf33ad9a54 atmel-samd/samd21: Enable long int on Express boards 
This is necessary for using 1970 epoch in the time module.
 2018-05-18 12:35:26 +02:00
Matt Land
06b293af29 pirkey, trinket, ugame 2018-05-17 13:56:10 -04:00
Matt Land
a84845c0ae itsbitsy, metro 2018-05-17 13:48:33 -04:00
Matt Land
173a0a5faa arduino, circuitplayground, feather boards 2018-05-17 13:42:08 -04:00
Matt Land
e1cccd3dac rename to UART 2018-05-17 13:21:15 -04:00
Matt Land
2210fc60b1 Merge branch 'master' of https://github.com/adafruit/circuitpython into feature-default-serial 2018-05-17 13:08:43 -04:00
Matt Land
c846f4bdae remove newline 2018-05-17 12:17:06 -04:00
Matt Land
4fd4adf974 not working 2018-05-17 12:14:51 -04:00
Matt Land
30c625ff46 Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground 2018-05-16 17:58:03 -04:00
Matt Land
0511becd55 Merge branch 'master' of https://github.com/adafruit/circuitpython into feature-i2c-gemma 2018-05-16 17:55:43 -04:00
Matt Land
b9b742cc69 add spi def to all boards pins file 2018-05-16 17:43:14 -04:00
Matt Land
c2fa892a02 fix formatting 2018-05-16 17:38:44 -04:00
Matt Land
cc52f8efd9 Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground 2018-05-16 17:32:50 -04:00
Matt Land
e8e75c056a For the two boards without SCL and SDA can you still add the board global entry for I2C? That way they'll raise the NotImplementedError with the better message instead of a NameError. 2018-05-16 17:02:41 -04:00
Matt Land
de885e81b1 Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground 2018-05-16 16:07:55 -04:00
Matt Land
8a351595ef formatting, trailing newlines 2018-05-16 15:57:25 -04:00
Matt Land
2c067edf54 used pins.c instead of README.rst 2018-05-16 15:54:01 -04:00
Matt Land
3144654854 SPI for all boards 2018-05-16 15:36:36 -04:00
Matt Land
244866c2c3 spi on much 2018-05-16 15:25:24 -04:00
Matt Land
10888be8e8 fixed pins 2018-05-16 15:07:12 -04:00
Matt Land
8d1d821876 pin issue 2018-05-16 14:58:57 -04:00
Matt Land
ff6e6b5155 best effort 2018-05-15 15:33:27 -04:00
Matt Land
4e65752d6e feather m0 boards 2018-05-15 15:28:23 -04:00
Matt Land
cd1f6627e4 formatting 2018-05-15 14:09:00 -04:00
Matt Land
bd7f603748 zero + feather logger 2018-05-15 14:06:01 -04:00
Roy Hooper
7d443c87b3 Add gemma_m0 pin exclusions 2018-05-15 14:03:39 -04:00
Matt Land
a10f04ad6e support for 2 2018-05-15 13:53:53 -04:00
Matt Land
b0bacd9b0b review code 2018-05-15 13:15:24 -04:00
Roy Hooper
3fd9900ea7 disable pins on trinket_m0 so that we can free a fair bit of flash - Issue #840 2018-05-15 13:13:59 -04:00
Scott Shawcroft
d3a5d40374
Merge pull request #785 from notro/rtc_calibration 
atmel-samd/samd21: Rework clock setup + calibration
 2018-05-08 10:55:51 -07:00
Noralf Trønnes
2893e795fc atmel-samd/samd21: Use XOSC32K on boards with a crystal 
Use XOSC32K on boards that have BOARD_HAS_CRYSTAL defined and set to 1.
 2018-05-05 18:45:15 +02:00
Dan Halbert
32363b801b 3.0: add CircuitPlayground and HID to CPX frozen modules 2018-05-04 08:44:33 -04:00
Scott Shawcroft
898a7d92e3 atmel-samd: Fix M4 RTC and ItsyBitsy M4 definition 2018-04-19 14:42:03 -04:00
Scott Shawcroft
812fe0c93f Turn on nvm in 3.0. 
Its 256b on M0 and 8k on M4 to match flash erase sizes.

Fixes #758
 2018-04-13 16:22:28 -07:00
Scott Shawcroft
28642ab10d Add audio output support! 
This evolves the API from 2.x (and breaks it). Playback devices are now
separate from the samples themselves. This allows for greater playback
flexibility. Two sample sources are audioio.RawSample and audioio.WaveFile.
They can both be mono or stereo. They can be output to audioio.AudioOut or
audiobusio.I2SOut.

Internally, the dma tracking has changed from a TC counting block transfers
to an interrupt generated by the block event sent to the EVSYS. This reduces
the overhead of each DMA transfer so multiple can occure without using up TCs.

Fixes #652. Fixes #522. Huge progress on #263
 2018-04-12 16:35:13 -07:00
Scott Shawcroft
2a26dac2bc Add initial ItsyBitsy M4 support 2018-04-12 11:16:52 -07:00
Jeff Epler
5eb9f9d060 atmel-samd: Fix rebooting to bootloader 
Commit efbf08266b moved _estack in order to ensure 8-byte alignment
of the stack, but the address of _bootloader_dbl_tap must remain
right at the end of SRAM.

I verified by reading the source that the 4-byte-aligned address is
used for all samd21 / samd51 boards in
adafruit/circuitpython@efbf08266b.  However, I only tested on
trinket_m0.

Closes: #739
 2018-04-03 21:40:10 -05:00
Scott Shawcroft
63d826a52a
Update USB PID 2018-03-23 09:34:02 -07:00
Scott Shawcroft
fd7dcff4e9 Add Feather M4 Express support. 
* Also fixed detection of SPI flash chip to correct look in the 2+
spots.
* Added support for using QSPI in dual read mode.
 2018-03-23 00:00:13 -07:00
Scott Shawcroft
3bf4d69f67 Update Metro M4 to rev F and make flash reset on start. 2018-03-22 16:42:47 -07:00
Kattni
05e2a7d1ac Added digital pin assignments 2018-03-15 20:28:09 -04:00
jerryneedell
04b4026666
fix dotstar for Gemma_M0 in CP3.0 
Uncomment lines in mpconfigport.h for gemma_m0 to allow dotstar access.  same issue as #514 for trinket_m0
 2018-03-14 21:28:56 -04:00
Scott Shawcroft
e7fc0b6aa7 Use DMA for long SPI transactions including those to the SPI Flash. 
QSPI is not currently working so its commented out.

This is progress on #652.
 2018-03-09 12:45:46 -08:00
Bryan Siepert
942b7ffbe0 fixes hardware dotstar support for 3.0 and addresses issue #514 2018-03-08 20:39:47 -08:00
Scott Shawcroft
01aceaae50 Support all boards and remove erase and page sizes because they never change. 2018-03-01 12:45:12 -08:00
Scott Shawcroft
2ab923862b Structify flash device definitions. 2018-02-28 19:15:54 -08:00
Scott Shawcroft
bf05183158 Merge remote-tracking branch 'adafruit/2.x' into merge_2x 2018-02-27 15:24:16 -08:00
Dan Halbert
cc7acfd491 consistently brand Itsy Bitsy M0 as 'Express' 2018-02-26 17:37:03 -05:00
Dan Halbert
957a82b592 add board.RX and .TX pins to metro_m4_express_revb 2018-02-23 09:54:39 -05:00
Dan Halbert
9b4477e1dc Implement UART for 3.0 + related fixes. 
1. UART: ported to ASF4. Allow rx-only and tx-only. Add .baudrate r/w property.

2. Make NeoPixel timing deterministic by turning off caches during NeoPixel writes.
3. Incorporate asf4 updates:
  a. async USART driver
  b. bringing Atmel START configuration closer to what we use
  c. Clock initialization order now specified by CIRCUITPY_GCLK_INIT_1ST and _LAST.
4. supervisor/port.c: Move commented-out clock-test pin setting to correct location.
 2018-02-21 17:18:49 -05:00
Scott Shawcroft
d02251f8cd Add a new board for Metro M4 Express Rev B. This is the board 
send to community members for testing.

Also tweaked and commented reset pin list for main Metro M4 Express
which is currently unreleased and is Rev D.
 2018-02-20 12:34:07 -08:00
Scott Shawcroft
15f626be58 m4 qspi works. m0 compiles 2018-02-19 14:02:04 -08:00
Scott Shawcroft
f20d5723aa Reorganize things. Reading jdec works. 2018-02-19 14:02:04 -08:00
Scott Shawcroft
4710a2adba Compiles for m4. Untested on m0. 
This introduces a new spi_flash_api.h that works for both SPI and
QSPI. The previous spi_flash functions are now called external_flash
to minimize confusion.
 2018-02-19 14:02:04 -08:00
Scott Shawcroft
a2bd772d5c Begin rework to add qspi support. 2018-02-19 14:02:04 -08:00
Dan Halbert
b001c0711b Correct _etext location; clean up .ld files 
1. Make _extext and _sidata coincide. Old _etext location did not include
.ARM.exidx sections, which were usually absent but not always. So flash
data was copied to RAM in wrong place.
2. Use decimal constants with "K" and "M" suffixes in .ld files instead
of hex constants, to make them easier to read and check for accuracy.
 2018-02-09 11:31:18 -05:00
Dan Halbert
eb49359aec CPX: typo in mpconfigboard.h broke CIRCUITPY 2018-01-30 15:48:22 -05:00
Radomir Dopieralski
d595a03bbd Update ugame port for the final ugame10 version 
There have been multiple uGame prototypes with differences in the pins
and other details. This updates the board definition to fit the final
uGame 10 design.
 2018-01-29 22:19:09 +01:00
Dan Halbert
efbf08266b make _estack be double-word aligned 2018-01-24 19:24:36 -05:00
brentrubell
ab1f133667 issue #536 CPX change SPI pin designations to externally available pins (#540) 
* issue #536 CPX

* switched pin assignment
 2018-01-22 19:31:55 -08:00
Tony DiCola
4bd1d09d74 Add missing Feather M0 RadioFruit boards: RFM69, RFM9x (#539) 2018-01-19 11:53:47 -08:00
Dan Halbert
d0cc8abd31 revise boards/ files for 3.0. All now compiled (but I don't have all to test). 2018-01-04 14:16:53 -05:00
Dan Halbert
d8686cc002 use correct LD_FILE in mpconfigboard.mk for boards with external flash 2018-01-03 16:49:38 -05:00
Dan Halbert
065e82015f merge from 2.2.0 + fix up board defs 2018-01-02 21:25:41 -05:00
Dan Halbert
72c911be97 Support SPI flash chips for CIRCUITPY, using non-DMA SPI for now. 2017-11-27 21:00:24 -05:00
Stewart Colborne
5eb7958425 ports/atmel-samd/boards/feather_m0_adalogger/pins: Added missing pins 
- Added D4 and moved associated SD_CS so that they are paired within list
- Added D7 and SD_CD which is the SD Card Detect pin
- Added D8 and GREEN_LED
- Added RED_LED associated with D13
 2017-11-25 22:00:32 -08:00
mrmcwethy
e0eae5cb2a Enable the Neopixel status light on Metro M0 Express and Feather M0 Express boards 2017-11-21 14:39:56 -08:00
Dan Halbert
312444bbd2 non-DMA SPI working; adding this now for testing; will continue with DMA 
Also, fixed pin mappings for rev B Metro M4:
swap PA12 and PA13 on SPI 2x3 header
swap A3 and A5

Comment out all frozen modules in CPX again to make room while waiting
for SPI flash.
 2017-11-16 19:09:35 -05:00
Scott Shawcroft
3cb5e7ea58 atmel-samd: Update Feather M0 Express USB PID 
This makes it different from the bootloaders and Arduino.
 2017-11-07 14:26:37 -08:00
Dan Halbert
7292984204 Implement busio.I2c. 
* Added asf4_conf/samd*/hpl_sercom_config.h
* Adjusted clocks in peripheral_clk_config.h.
* Put some frozen libs back in CPX for testing.
* Implement common-hal I2C
* Add samd*_peripherals.h in parallel with samd*_pins.h for common
  functions and data.
* Store SERCOM index in pins table for convenience.
* Canonicalize some #include guard names in various .h files.

simpler reset of SERCOMs; remove unused routine
 2017-11-07 09:59:54 -08:00
Scott Shawcroft
f4c8256345 atmel-samd: Add TX/RX led support for Metro M4. 2017-10-31 22:39:16 -07:00
Scott Shawcroft
3177e10e9e atmel-samd: Add samd21 neopixel support. 
Also, fix and enable the status neopixel.

Fixes #264
 2017-10-31 22:38:09 -07:00
Tony DiCola
d023879bea atmel-samd: Update and enable neopixel_write for ASF4, tested on SAMD21 only. 2017-10-31 16:06:36 -07:00
Scott Shawcroft
4aeef100f6 atmel-samd: More USB polish 
* Introduce a python script to generate the USB descriptor instead of
  a bunch of C macros. In the future, we can use this dynamically in
  CircuitPython.
* Add support for detecting read-only mass storage mounts.

Fixes #377
 2017-10-30 18:29:20 -07:00
Scott Shawcroft
73c15dcf8b Merge commit 'f869d6b2e339c04469c6c9ea3fb2fabd7bbb2d8c' into nrf2_merge 
This is prep for merging in the NRF5 pull request.
 2017-10-24 22:31:16 -07:00