e409ff75cd
Turn off BLE HCI on ESP32-S2
2022-01-26 09:46:29 -08:00
b2e1dbd2df
Implement name and address get/set
2022-01-25 19:17:26 -08:00
5a6f456dbb
Add BLE scanning for S3 and C3.
...
Everything else should raise NotImplementedError.
First step in #5926
2022-01-25 16:28:46 -08:00
9c31346c45
fix implmetation
2022-01-25 16:42:49 -05:00
70512758a9
enable binascii in microbit_v2 build
2022-01-25 16:06:47 -05:00
4a3c636b6b
Merge pull request #5874 from dkulinski/epaper_two_byte_length
...
Update EPaperDisplay to allow for two byte sequence length
2022-01-25 11:13:36 -08:00
19f9163892
Bringing branch up to date with current main
2022-01-25 11:02:00 -07:00
324ff9c30d
bump idf to latest commit on v4.4 branch
2022-01-25 18:01:09 +05:30
60801066b2
Fix magtag, openbook for EPaperDisplay constructor
2022-01-24 12:34:01 -07:00
367a1d53c0
Fixes for pulsein on ESP32S3
2022-01-23 13:14:34 -06:00
4d78e3401c
Fix esp32s3 devkitc uart naming and add board.UART
2022-01-22 15:25:33 +11:00
5933c04499
Merge pull request #5899 from tannewt/rp2040_winbond
...
Add winbond to Feather RP2040
2022-01-21 16:44:52 -05:00
9a353a4f56
Merge pull request #5422 from Neradoc/nera-secondary-I2C
...
Allow multiple board buses
2022-01-21 11:08:14 -08:00
f2713afff6
Merge pull request #5896 from dhalbert/open-modes-check
...
Validate open() mode
2022-01-21 10:50:43 -08:00
c598ede84e
Add winbond to Feather RP2040
2022-01-21 10:34:38 -08:00
3970aa5a5e
fix build failure on two boards
2022-01-21 10:11:33 +05:30
67293c265c
Merge branch 'main' into board-bus
2022-01-21 10:08:39 +05:30
dab35f7c72
Merge pull request #5880 from jepler/espressif-serial-trick-uf2
...
Request ROM bootloader when resetting using the 'serial trick'
2022-01-21 09:56:12 +05:30
fed5227de9
shrink stringcar_m0_express
2022-01-20 20:34:04 -05:00
ea30a8ac04
Reboot into the ROM bootloader from 1200 baud
...
Per Scott, the purpose of this trick is to make the board programmable from Arduino even when CP is installed, so my convenience of escaping into UF2 is not going to work out.
2022-01-20 18:50:50 -06:00
35175715f9
Check target defined
2022-01-20 14:11:33 -08:00
d99847b410
Refactor pin reset on ESP
...
This makes it easier to blanket never reset flash and USB pins. It
also allows us to set a custom state after reset. The first case
is for the double tap reset that needs to be pulled low.
Fixes #5893
2022-01-20 12:40:41 -08:00
13db65566d
ESP NeoPixel fixes
...
This tweaks the RMT timing to better match the 1/3 and 2/3 of 800khz
guideline for timing. It also ensures a delay of 300 microseconds
with the line low before reset.
Pin reset is now changed to the IDF default which pulls the pin up
rather than CircuitPython's old behavior of floating the pin.
Fixes #5679
2022-01-19 16:29:07 -08:00
8bae6af12a
Merge pull request #5888 from tannewt/esp_tick_core
...
Ensure supervisor_tick is run on the same core as CP
2022-01-19 19:26:50 -05:00
880d43a4f7
Fix pin typo.
2022-01-19 17:04:30 -05:00
42fbebe62a
Merge pull request #5832 from ladyada/main
...
ESP32S2 camera board draft
2022-01-19 12:04:13 -08:00
78942112c7
Ensure supervisor_tick is run on the same core as CP
2022-01-19 11:36:40 -08:00
f13ea93fe6
fix A5 pin name
2022-01-19 14:22:01 -05:00
6d7472357d
newline
2022-01-18 20:46:09 -05:00
7ee5c01cf8
Add Espressif C3 dev board
2022-01-18 17:39:52 -08:00
09cf95a51c
no psram :(
2022-01-18 20:14:17 -05:00
de45a20b08
EOF
2022-01-18 20:14:17 -05:00
71c792d608
try initial esp32s3 qtpy def
2022-01-18 20:14:17 -05:00
d4dab79234
add buttonpin
2022-01-18 20:14:17 -05:00
c1cee63c5a
fix tuplecompile
2022-01-18 20:14:17 -05:00
1d44bf1c0c
add camera data port
2022-01-18 20:14:17 -05:00
3381ac149e
fix camera display io to use default spi bus
2022-01-18 20:14:16 -05:00
13b319c430
try rotation 0
2022-01-18 20:14:16 -05:00
e9f0c1796e
oof fix i2c lines!
2022-01-18 20:14:16 -05:00
4400124efe
snappysnap
2022-01-18 20:14:16 -05:00
8b26f594c9
try not resetting i2c power
2022-01-18 20:14:16 -05:00
647b894e7b
?? some include needed
2022-01-18 20:14:16 -05:00
9c933558b5
enable I2C by default
2022-01-18 20:14:15 -05:00
872beeccfe
Merge remote-tracking branch 'origin/main' into espressif-serial-trick-uf2
2022-01-18 19:07:05 -06:00
c839d9b3cc
Fix S2 builds by not turning on USB with wifi
2022-01-18 15:50:32 -08:00
679f4b30ba
Tweak heap sizes for different targets
2022-01-18 15:23:19 -08:00
09bdad6c5b
Merge pull request #5877 from 0hotpotman0/main
...
Add softdev_version 7.0.1
2022-01-17 21:39:12 -05:00
49b8579bcd
Request UF2 bootloader when resetting using the 'serial trick'
2022-01-17 17:14:31 -06:00
3453ced296
Merge pull request #5860 from tannewt/s3_core_1
...
Switch CP to core 1 on S3
2022-01-17 16:10:05 -05:00
895a8a9e72
Merge pull request #5866 from dhalbert/espressif-open-drain
...
fix espressif DigitalInOut open-drain
2022-01-17 12:51:31 -06:00
Scott Shawcroft
jerryneedell
Scott Shawcroft
Dan Kulinski
microDev
root
Michael Himing
Dan Halbert
Dan Halbert
Jeff Epler
Kattni Rembor
lady ada
Jeff Epler