2a26dac2bc
Add initial ItsyBitsy M4 support
2018-04-12 11:16:52 -07:00
eaa9923a8f
force_create rename got lost due to editing error
2018-04-10 12:24:27 -04:00
5f98953ed8
esp8266 and nrf: raise NotImplementedError
2018-04-10 12:08:41 -04:00
eb7d0e317a
Create genhdr/ directory in time
2018-04-09 22:23:39 -04:00
aa8c262d14
add storage.erase_filesystem() to erase and reformat CIRCUITPY
2018-04-09 12:52:42 -04:00
4e053cea0d
Merge pull request #628 from sommersoft/super_status
...
Added Function To Check the Serial Connection From CircuitPython Layer
2018-04-08 22:06:09 -07:00
1e87a785b9
Move CDC Comm back to Interface 0 for compat with Win7 drivers.
2018-04-08 15:59:19 -04:00
726d5e52a3
Merge branch 'master' into 3.0_hid
2018-04-08 09:52:29 -04:00
a159b85340
Reorder composite device interfaces; fix report length bug
2018-04-08 09:33:02 -04:00
fe6f5aaa70
atmel-samd: reset: reset() was always entering bootloader mode
...
.. set the dbl_tap word to a different special value unless
RUNMODE_BOOTLOADER was selected
2018-04-05 08:16:53 -05:00
5eb9f9d060
atmel-samd: Fix rebooting to bootloader
...
Commit efbf08266badafruit/circuitpython@efbf08266b . However, I only tested on
trinket_m0.
Closes : #739
2018-04-03 21:40:10 -05:00
beb6ad2e40
Add USB HID support, including Consumer Control
2018-04-02 21:37:44 -04:00
435e894fa0
Merge branch 'master' into 3.0_hid
2018-04-02 19:19:43 -04:00
d005b12326
WIP: seems to be done
2018-04-02 19:08:18 -04:00
c00b25ec45
WIP: HID works with MSC interfaces removed
2018-03-30 23:31:28 -04:00
df91878d2e
WIP: works with just keyboard but not complex report descriptor
2018-03-30 23:24:00 -04:00
8af98d0dc9
ambiguized directory paths
2018-03-30 22:44:16 +00:00
a5b60647be
improved arrangement
2018-03-30 22:26:21 +00:00
7c0be04696
verbiage cleanup
2018-03-30 22:21:35 +00:00
c70acab8b3
updated README; added git submodule info
2018-03-30 22:16:36 +00:00
6ee573c7c9
Merge branch 'master' into super_status
2018-03-30 14:27:39 -05:00
676ed4e199
Merge pull request #724 from tannewt/fix_freetouch_submodule
...
Remove freetouch files that were accidentally checked in and
2018-03-28 14:24:32 -07:00
19b0b414e6
Remove freetouch files that were accidentally checked in and
...
readd the submodule.
2018-03-28 14:04:53 -07:00
abec199c19
Enable high-quality float hash
...
This appears to have a relatively small impact on flash usage but
fixes some pathological slow behavior putting floats in dicts or sets.
Closes : #704
2018-03-27 21:56:30 -05:00
4c2f729a7a
Merge pull request #713 from jepler/lto-type-diagnostic-bis
...
Allow building on gcc 5.4, while preserving ability to build with 7.2
2018-03-27 09:28:41 -04:00
77938db8c8
Merge pull request #719 from tannewt/fix_i2c_hang
...
Fix I2C init hang when the SCL pin is pulled low.
2018-03-26 20:08:14 -04:00
4190aa2eed
Merge pull request #715 from jepler/array-operation-restrictions-bis
...
Remove 'O', 'P' support in arrays
2018-03-26 20:01:34 -04:00
cebcec5e63
Check for floating pins by pulling them low briefly before testing their values.
2018-03-26 16:32:16 -07:00
355bf8b553
Conditionally compile out nonstandard array/struct typecodes
...
.. defaulting to off for circuitpython-supported boards, on for others.
.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
2018-03-26 18:13:49 -05:00
25ba8ee489
Add an s because grammar.
2018-03-26 15:21:08 -07:00
37538fc0e7
Fix I2C init hang when the SCL pin is pulled low.
...
We added a check to make sure the pins are in a high state before
initing the bus. This leads to a friendly error message when someone
forgets to add the pull up resistors to their circuit.
2018-03-26 15:13:52 -07:00
ea39f4378e
Merge pull request #698 from sommersoft/repl_fix
...
Fix 128 Character Max Paste Into REPL
2018-03-26 13:02:43 -07:00
9bd55cf4c7
minor cleanup
2018-03-26 08:14:37 -05:00
23009fdd63
future-proof for buffer size changes
2018-03-26 06:25:04 +00:00
8b6aeb9e19
Merge pull request #702 from jepler/issue689bis
...
correct typo in filename
2018-03-25 23:58:00 -04:00
d57397f9c8
Remove an unneeded -Wno-error=lto-type-mismtach
2018-03-25 22:04:15 -05:00
c0029e1d97
Don't lose half of the processor's serial number
...
Before this change, `microcontroller.cpu.uid` returned values
where the top 4 bits of each byte were zero, because of
an incorrect bitmask used in this function.
2018-03-25 13:01:04 -05:00
31f5b6a238
WIP: simple working HID
2018-03-24 18:29:12 -04:00
d80e54458d
correct typo in filename
2018-03-24 10:44:24 -05:00
6205ed9a0c
updated cdc_enabled; now more dynamic status return
2018-03-24 03:42:58 +00:00
ef16109c5d
updated with requested changes
2018-03-24 00:55:48 +00:00
f237657e5e
extended buffer check to usb_cdc_background
2018-03-23 18:41:27 +00:00
63d826a52a
Update USB PID
2018-03-23 09:34:02 -07:00
ccbe557e30
removed leftover debugging bits
2018-03-23 15:45:30 +00:00
d434635822
add buffer check before triggering new usb read
2018-03-23 15:07:02 +00:00
fd7dcff4e9
Add Feather M4 Express support.
...
* Also fixed detection of SPI flash chip to correct look in the 2+
spots.
* Added support for using QSPI in dual read mode.
2018-03-23 00:00:13 -07:00
06b4c83f59
Add reminder to remove Saleae when going fast.
2018-03-22 17:44:44 -07:00
3bf4d69f67
Update Metro M4 to rev F and make flash reset on start.
2018-03-22 16:42:47 -07:00
a7e3c74fed
Autocreate files that prevent MacOS indexing of the CIRCUITPYTHON dive
...
.. the price of this appears to be about 112 bytes of flash and 12
bytes of RAM, according to the stats printed during the build.
It also uses up 4 directory entries (out of 128), but does not reduce
the number of blocks usable for storing file contents.
These are the same items noted in the Adafruit README for Trinket M0
as preventing MacOS indexing.
Closes : #689
2018-03-22 08:07:32 -05:00
9ab39eb2d2
Merge pull request #688 from jepler/atsamd-build-reqs
...
Better document build requirements and steps
2018-03-20 10:03:01 -07:00
Scott Shawcroft
Dan Halbert
Jeff Epler
Scott Shawcroft
sommersoft
sommersoft
Jeff Epler
Kattni