Commit Graph

10030 Commits

Author SHA1 Message Date
Bill Sideris e139cd9ec0
Update cyw43 to 1.0.1 2023-06-21 01:35:52 +03:00
Bill Sideris 0aa7854d5b
Update pico-sdk to 1.5.1 2023-06-19 18:00:49 +03:00
leosun 7354e2ad03 fix `invalid pin` error when create `busio.SPI`
on specific SCK/MOSI/MISO pins, the `common_hal_busio_spi_construct`
method always skip miso pins which will lead to a `invalid pin`
exception when SPI initilized
2023-06-15 07:48:19 +08:00
Jeff Epler 666fb94ca3
Merge pull request #8056 from jepler/matrixportal-s3
Add Adafruit MatrixPortal S3 board def & update protomatter
2023-06-13 19:34:08 -05:00
Melissa LeBlanc-Williams 46de2cb682 Add buttons and accelerometer interrupt 2023-06-13 07:59:33 -07:00
Scott Shawcroft a5e3c6ee82
Merge pull request #8077 from jepler/nrf-synthio
nrf52840: allow 12 voices
2023-06-12 12:44:08 -07:00
Seon Rozenblum 14af662ab9 Added support for Unexpected Maker NANOS3 2023-06-12 20:32:46 +10:00
Jeff Epler d5a2293784 nrf52840: allow 12 voices
In my testing, the feather bluefruit can do 12 voices at 48kHz!
This is a simple case (no LFOs, no ring modulation) so other situations might
require a lower sample rate, fewer voices, or both.

The sound is a little artifacty & low-fi but I think that's down to the speaker
& use of PWM instead of I2S.
2023-06-09 11:30:12 -05:00
Dan Halbert 4d5caff0ed fix missing newline 2023-06-08 13:02:24 -04:00
Dan Halbert 46ddacddde
Merge branch 'main' into efr32-doc-fixes 2023-06-08 12:57:09 -04:00
Dan Halbert 6cf7e45f10
Merge pull request #8037 from jpconstantineau/fix-PCA10100
fix to make buttons and leds compatible with pca10056
2023-06-08 12:56:09 -04:00
Mario Bodemann 1e3f1d745a Update badger2040 start sequence for more contrast
This change is taken from the pico-sdk: https://github.com/pimoroni/pimoroni-pico/blob/main/drivers/uc8151_legacy/uc8151_legacy.cpp#L67-L120 and increases the contrast of pictures sent dramatically. It comes with the expense of using way more time when updating though.
2023-06-08 18:25:45 +02:00
Jeff Epler d4913b04e0 rgbmatrix: update protomatter
and re-organize so that esp32 s2/s3 don't do as much at reset

.. it's not necessary (because most data is in esp-idf managed memory)
and doing this saves me from having to debug why reconstruct isn't working
properly on that platform.

This needs to be tested on other platforms again before being merged!
2023-06-08 10:43:32 -05:00
Jeff Epler c408193ffe
Merge pull request #8048 from jepler/synthio-biquad
Synthio: switch to per-note biquad filtering
2023-06-07 14:48:31 -05:00
applecuckoo 40a31390aa
Remove available modules section 2023-06-07 07:30:02 +12:00
Dan Halbert e631350b9b
Merge pull request #8070 from dhalbert/port-specific-submodules
Provide port-specific fetch of submodules
2023-06-06 14:46:39 -04:00
Dan Halbert 38f6fa27e3 fetch-port-submodules; fetch-all-submodules 2023-06-05 17:23:34 -04:00
applecuckoo 2d78cf3428
Merge branch 'adafruit:main' into efr32-doc-fixes 2023-06-06 08:56:40 +12:00
Jeff Epler ce84ecf3f6
Fix flash size 2023-06-01 18:57:18 -05:00
Jeff Epler 2fb42579e8
Add minimally tested Adafruit MatrixPortal S3 board def
tested:
 * board.LED
 * neopixel as status LED
 * i2c scan finds lis3dh sensor
 * psram capacity

not tested:
 * rgb matrix      o_O
 * the gpio pins

Introduce new `board` properties for matrixportal-style boards:
 * MTX_COMMON
 * MTX_ADDRESS

These are intended to simplify use of the RGBMatrix constructor:
```py
matrix = RGBMatrix(..., addr_pins=MTX_ADDRESS[:3], **MTX_COMMON)
```
removing the need for sending in the following individual parameters:
 * rgb_pins
 * clock_pin
 * latch_pin
 * output_enable_pins
and making construction of a 16/32/64-row display easy by slicing a tuple
of all address pins rather than writing out the individual pins. If it
works out it'll be ported back to the matrixportal m4 as well.
2023-06-01 17:23:34 -05:00
Pierre Constantineau 6fd700eb11 added HW_LED_STATUS as requested 2023-06-01 10:56:43 -06:00
Scott Shawcroft f2f19e93ec
Fix listing 2023-06-01 09:47:30 -07:00
tomiahola 31f2faa977
SAM E54 Xplained Pro: add support for SST26VF064B flash chip 2023-06-01 08:36:25 +03:00
Jeff Epler fed8d5825b
synthio: add biquad filter type & basic filter calculations
the filter cannot be applied as yet.
2023-05-29 09:50:18 -05:00
hyx0329 d73f390a4d
M60 keyboard: allow run on battery
This also expose the battery control pin as BATTERY_ENABLE,
so users can fully power off the keyboard.
2023-05-28 12:11:34 +08:00
applecuckoo 60935c29eb
Fix up EFR32 port readme 2023-05-28 16:01:59 +12:00
Pierre Constantineau 60ce38ed8b fix trailing space of pins.c 2023-05-26 13:30:32 -06:00
Pierre Constantineau 325037b75e fix to make buttons and leds compatible with pca10056 2023-05-26 13:17:05 -06:00
Dan Halbert ff2003145f
Merge pull request #8025 from tkroo/patch-1
update spi pins to match schematic
2023-05-23 23:11:16 -04:00
Dan Halbert b9bb966835
Merge pull request #8026 from phamhuyvn/patch-1
Update pins.c
2023-05-23 23:10:45 -04:00
Dan Halbert 713d86f42b
Merge pull request #8021 from SiliconLabs/dev
Silabs fixes, BLE bonding and peripheral changes
2023-05-23 23:10:19 -04:00
phamhuyvn 2d7fa6dd8a
Update pins.c
Fixed Button_R from GPIO6 to GPIO7
Fixed LCD_BACKLIGHT from GPIO29 to GPIO26
2023-05-24 08:44:57 +07:00
David Sullivan d570b8b4ef update spi pins to match schematic 2023-05-23 17:42:36 -07:00
David Sullivan 72b1bc890f
Update spi pins in mpconfigboard.h 2023-05-23 17:27:53 -07:00
David Sullivan 3f845fe8fd board files for lolin-s3-mini 2023-05-23 14:24:28 -07:00
Dan Halbert b26e4ca0ae
Merge pull request #7985 from jepler/synthio-lfo-dag
synthio: Add LFOs
2023-05-23 15:48:11 -04:00
Dan Halbert 2422179419
Merge pull request #8014 from tkroo/lolin-c3-pico
Board files for LOLIN C3 PICO
2023-05-23 15:02:20 -04:00
Scott Shawcroft 596773286d
Merge pull request #8016 from charlieh0tel/new-mimxrt1060-evkb-board
Adds MIMXRT1060-EVKB as new board.
2023-05-23 11:11:32 -07:00
Christopher Hoover 49b1368d65 Changed PID to 0x813C. 2023-05-22 20:06:50 -07:00
David Sullivan a163273ee0
Update ports/espressif/boards/lolin_c3_pico/mpconfigboard.h
update board I2C pins.

Co-authored-by: Dan Halbert <halbert@halwitz.org>
2023-05-22 19:00:16 -07:00
Scott Shawcroft 9040ac8bc6
Merge pull request #8003 from dhalbert/esp-touch-alarm-fix
Esp touch alarm fix
2023-05-22 13:43:54 -07:00
David Sullivan a5df186fa7 change copyright notice 2023-05-22 13:30:36 -07:00
Scott Shawcroft 3f7e6db4fa
Merge pull request #8015 from dhalbert/rp2040-sleep-memory
RP2040 SleepMemory
2023-05-22 13:08:37 -07:00
David Sullivan 7048ce46b1 match pins to what wemos uses 2023-05-22 10:06:50 -07:00
David Sullivan 393c0bb1f6 move sck, scl, and sda pin assignments 2023-05-21 23:27:58 -07:00
Christopher Hoover 73299ae48c Adds new board for MIMRT1060-EVKB (not to be confused with MIMRT1060-EVK). 2023-05-21 17:42:30 -07:00
Dan Halbert 955d2723d0 RP2040 SleepMemory 2023-05-21 19:05:25 -04:00
David Sullivan 0a1b2f8771 include neopixel lib 2023-05-21 14:30:51 -07:00
David Sullivan a64d66846b remove leftover files 2023-05-21 12:45:23 -07:00
David Sullivan ebd7e29b98 create files 2023-05-21 11:35:11 -07:00