8625e53817
change board dicts to include a common macro with __name__
2021-09-03 21:03:55 +02:00
7520feed1c
Move ParallelBus to its own module
2021-08-29 07:33:54 -05:00
4d05bb26bf
change board.ID to board.board_id
2021-08-26 23:11:55 +02:00
b14b294516
add board.ID
2021-08-26 23:11:55 +02:00
379461df7d
Deprecate Display's constructor arg set_vertical_scroll
2021-08-23 09:17:59 -05:00
ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset
...
Now we use never_reset which is generally more correct and easier
to get right.
Fixes #5001 and fixes #4997
2021-07-15 16:20:04 -07:00
294ef59f27
Add LED pin to Adafruit boards.
2021-05-10 16:39:01 -04:00
aec0ef3cbf
Switch devices.h to nvm.toml data
2021-03-25 09:57:18 -07:00
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
7321411962
Added frequency to parallel display
2021-03-11 19:32:43 -06:00
f1ada8e880
Automatically count EXTERNAL_FLASH_DEVICES
2021-03-07 11:48:39 -06:00
40118bcf57
Add `board_deinit` for use with sleep
...
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes #3786
2020-12-08 10:52:25 -08:00
dbfabddf58
rename ESP TX and RX pins; remove support
2020-11-30 11:11:04 -05:00
848eb28132
esp-uart-pins
2020-11-28 14:52:56 -05:00
b921543571
Requested changes take 1
2020-09-25 21:27:29 -04:00
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-14 17:14:44 -07:00
759fdffda5
Update ports/atmel-samd/boards/pyportal_titano/board.c
...
Co-Authored-By: Scott Shawcroft <scott@tannewt.org>
2020-04-14 18:24:58 -05:00
09dc46a984
Add Protomatter and FramebufferDisplay
2020-04-14 18:24:54 -05:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
798118b74f
Update board.c's to remove remaining tick.h
2020-03-27 14:52:35 -07:00
9e0c00dfd4
adding a backlight polarity flag to Display
2020-03-25 22:51:20 -07:00
40434d6919
wip
2019-12-05 22:45:53 -05:00
2f04c5891f
flip it around
2019-10-31 14:11:50 -04:00
ab3da3071c
flip MADCTL BGR bit to reflect RGB colors
2019-10-31 10:11:47 -04:00
d2b613134d
we should use native rotation, and tweak madctl (not done yet)
2019-10-29 22:53:44 -04:00
1e869d1334
switch to 8-bit mode - tested on hardware!
2019-10-29 21:14:45 -04:00
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
5a8846d33c
remove cruft from prv board
2019-08-08 15:12:01 -04:00
f87f48ab88
adding pyportal titano board definition
2019-08-08 14:56:28 -04:00
1d4700cb6c
add pindefs for tft and tft control
2019-08-07 18:29:20 -04:00
8f6eac98f3
add defs for pyportal titano
2019-08-07 17:10:31 -04:00
Neradoc
Jeff Epler
Scott Shawcroft
Kattni Rembor
Mark
microDev
gamblor21
Jeff Epler
Dan Halbert
Mark Roberts
siddacious
brentru
ladyada