Commit Graph

130 Commits

Author SHA1 Message Date
Laurens Valk fe120484b6 py/gc: Add hook to run code during time consuming GC operations.
This makes it possible for cooperative multitasking systems to keep running
event loops during garbage collector operations.

For example, this can be used to ensure that a motor control loop runs
approximately each 5 ms.  Without this hook, the loop time can jump to
about 15 ms.

Addresses #3475.

Signed-off-by: Laurens Valk <laurens@pybricks.com>
2021-11-01 15:39:37 +11:00
Damien George bc89cdeb45 py/gc: Only use no_sanitize_address attribute for GCC 4.8 and above.
It's not supported on older GCC versions.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-18 14:15:37 +10:00
Jeff Epler 9a74546f8d py/gc: Access the list of root pointers in an asan-compatible way.
Signed-off-by: Jeff Epler <jepler@gmail.com>
2021-05-30 11:50:51 +10:00
Damien George b6b39bff47 py/gc: Make gc_lock_depth have a count per thread.
This commit makes gc_lock_depth have one counter per thread, instead of one
global counter.  This makes threads properly independent with respect to
the GC, in particular threads can now independently lock the GC for
themselves without locking it for other threads.  It also means a given
thread can run a hard IRQ without temporarily locking the GC for all other
threads and potentially making them have MemoryError exceptions at random
locations (this really only occurs on MCUs with multiple cores and no GIL,
eg on the rp2 port).

The commit also removes protection of the GC lock/unlock functions, which
is no longer needed when the counter is per thread (and this also fixes the
cas where a hard IRQ calling gc_lock() may stall waiting for the mutex).

It also puts the check for `gc_lock_depth > 0` outside the GC mutex in
gc_alloc, gc_realloc and gc_free, to potentially prevent a hard IRQ from
waiting on a mutex if it does attempt to allocate heap memory (and putting
the check outside the GC mutex is now safe now that there is a
gc_lock_depth per thread).

Signed-off-by: Damien George <damien@micropython.org>
2021-05-10 13:07:16 +10:00
Damien George ad4656b861 all: Rename BYTES_PER_WORD to MP_BYTES_PER_OBJ_WORD.
The "word" referred to by BYTES_PER_WORD is actually the size of mp_obj_t
which is not always the same as the size of a pointer on the target
architecture.  So rename this config value to better reflect what it
measures, and also prefix it with MP_.

For uses of BYTES_PER_WORD in setting the stack limit this has been
changed to sizeof(void *), because the stack usually grows with
machine-word sized values (eg an nlr_buf_t has many machine words in it).

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:46:42 +11:00
Damien George 7e956fae28 py: Rename BITS_PER_BYTE to MP_BITS_PER_BYTE.
To give this macro a standard MP_ prefix.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-04 22:46:42 +11:00
stijn cb8e2f02ab py/gc: Fix debug printing of pointer.
When DEBUG_printf is the standard printf, compilers require the value for
%p to be an actual pointer instead of an integer.
2021-01-30 14:41:29 +11:00
Emil Renner Berthing ccd92335a1 py, extmod: Introduce and use MP_FALLTHROUGH macro.
Newer GCC versions are able to warn about switch cases that fall
through.  This is usually a sign of a forgotten break statement, but in
the few cases where a fall through is intended we annotate it with this
macro to avoid the warning.
2020-10-22 11:53:16 +02:00
stijn 84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George 3f39d18c2b all: Add *FORMAT-OFF* in various places.
This string is recognised by uncrustify, to disable formatting in the
region marked by these comments.  This is necessary in the qstrdef*.h files
to prevent modification of the strings within the Q(...).  In other places
it is used to prevent excessive reformatting that would make the code less
readable.
2020-02-28 10:31:07 +11:00
David Lechner ccc18f047d py/gc: Don't include or init gc_mutex when GIL is enabled.
When threads and the GIL are enabled, then the GC mutex is not needed.  The
gc_mutex field is never used in this case because of:

    #if MICROPY_PY_THREAD && !MICROPY_PY_THREAD_GIL
    #define GC_ENTER() mp_thread_mutex_lock(&MP_STATE_MEM(gc_mutex), 1)
    #define GC_EXIT() mp_thread_mutex_unlock(&MP_STATE_MEM(gc_mutex))
    #else
    #define GC_ENTER()
    #define GC_EXIT()
    #endif

So, we can completely remove gc_mutex everywhere when MICROPY_PY_THREAD
&& !MICROPY_PY_THREAD_GIL.
2020-01-23 13:28:42 +11:00
Paul Sokolovsky 016d9a40fe various: Add and update my copyright line based on git history.
For modules I initially created or made substantial contributions to.
2019-05-17 18:04:15 +10:00
Paul Sokolovsky 5ed578e5b4 py/gc: Adjust gc_alloc() signature to be able to accept multiple flags.
The older "bool has_finaliser" gets recast as GC_ALLOC_FLAG_HAS_FINALISER=1
so this is a backwards compatible change to the signature.  Since bool gets
implicitly converted to 1 this patch doesn't include conversion of all
calls.
2018-12-20 17:52:16 +11:00
Damien George 91041945c9 py/gc: In gc_alloc, reset n_free var right before search for free mem.
Otherwise there is the possibility that n_free starts out non-zero from the
previous iteration, which may have found a few (but not enough) free blocks
at the end of the heap.  If this is the case, and if the very first blocks
that are scanned the second time around (starting at
gc_last_free_atb_index) are found to give enough memory (including the
blocks at the end of the heap from the previous iteration that left n_free
non-zero) then memory will be allocated starting before the location that
gc_last_free_atb_index points to, most likely leading to corruption.

This serious bug did not manifest itself in the past because a gc_collect
always resets gc_last_free_atb_index to point to the start of the GC heap,
and the first block there is almost always allocated to a long-lived
object (eg entries from sys.path, or mounted filesystem objects), which
means that n_free would be reset at the start of the search loop.

But with threading enabled with the GIL disabled it is possible to trigger
the bug via the following sequence of events:

1. Thread A runs gc_alloc, fails to find enough memory, and has a non-zero
   n_free at the end of the search.
2. Thread A calls gc_collect and frees a bunch of blocks on the GC heap.
3. Just after gc_collect finishes in thread A, thread B takes gc_mutex and
   does an allocation, moving gc_last_free_atb_index to point to the
   interior of the heap, to a place where there is most likely a run of
   available blocks.
4. Thread A regains gc_mutex and does its second search for free memory,
   starting with a non-zero n_free.  Since it's likely that the first block
   it searches is available it will allocate memory which overlaps with the
   memory before gc_last_free_atb_index.
2018-08-14 16:11:21 +10:00
Damien George b630dfcc1d py: Fix compiling with debug enabled and make more use of DEBUG_printf.
DEBUG_printf and MICROPY_DEBUG_PRINTER is now used instead of normal
printf, and a fault is fixed in mp_obj_class_lookup with debugging enabled;
see issue #3999.  Debugging can now be enabled on all ports including when
nan-boxing is used.
2018-08-02 14:17:24 +10:00
Damien George 522ea80f06 py/gc: Add gc_sweep_all() function to run all remaining finalisers.
This patch adds the gc_sweep_all() function which does a garbage collection
without tracing any root pointers, so frees all the memory, and most
importantly runs any remaining finalisers.

This helps primarily for soft reset: it will close any open files, any open
sockets, and help to get the system back to a clean state upon soft reset.
2018-06-12 11:55:29 +10:00
Damien George 6bd78741c1 py/gc: When GC threshold is hit don't unnecessarily collect twice.
Without this, if GC threshold is hit and there is not enough memory left to
satisfy the request, gc_collect() will run a second time and the search for
memory will happen again and will fail again.

Thanks to @adritium for pointing out this issue, see #3786.
2018-05-21 13:36:21 +10:00
Damien George 749b16174b py/mpstate.h: Adjust start of root pointer section to exclude non-ptrs.
This patch moves the start of the root pointer section in mp_state_ctx_t
so that it skips entries that are not pointers and don't need scanning.

Previously, the start of the root pointer section was at the very beginning
of the mp_state_ctx_t struct (which is the beginning of mp_state_thread_t).
This was the original assembler version of the NLR code was hard-coded to
have the nlr_top pointer at the start of this state structure.  But now
that the NLR code is partially written in C there is no longer this
restriction on the location of nlr_top (and a comment to this effect has
been removed in this patch).

So now the root pointer section starts part way through the
mp_state_thread_t structure, after the entries which are not root pointers.

This patch also moves the non-pointer entries for MICROPY_ENABLE_SCHEDULER
outside the root pointer section.

Moving non-pointer entries out of the root pointer section helps to make
the GC more precise and should help to prevent some cases of collectable
garbage being kept.

This patch also has a measurable improvement in performance of the
pystone.py benchmark: on unix x86-64 and stm32 there was an improvement of
roughly 0.6% (tested with both gcc 7.3 and gcc 8.1).
2018-05-13 22:53:28 +10:00
Damien George 2a0cbc0d38 py/gc: Update comment now that gc_drain_stack is called gc_mark_subtree. 2018-02-19 16:08:20 +11:00
Ayke van Laethem 736faef223 py/gc: Make GC stack pointer a local variable.
This saves a bit in code size, and saves some precious .bss RAM:

                 .text  .bss
minimal CROSS=1: -28    -4
unix (64-bit):   -64    -8
2018-02-19 16:05:46 +11:00
Ayke van Laethem 5c9e5618e0 py/gc: Rename gc_drain_stack to gc_mark_subtree and pass it first block.
This saves a bit in code size:

minimal CROSS=1: -44
unix:            -96
2018-02-19 16:00:59 +11:00
Ayke van Laethem ea7cf2b738 py/gc: Reduce code size by specialising VERIFY_MARK_AND_PUSH macro.
This macro is written out explicitly in the two locations that it is used
and then the code is optimised, opening possibilities for further
optimisations and reducing code size:

unix:            -48
minimal CROSS=1: -32
stm32:           -32
2018-02-19 15:58:49 +11:00
Damien George 02d830c035 py: Introduce a Python stack for scoped allocation.
This patch introduces the MICROPY_ENABLE_PYSTACK option (disabled by
default) which enables a "Python stack" that allows to allocate and free
memory in a scoped, or Last-In-First-Out (LIFO) way, similar to alloca().

A new memory allocation API is introduced along with this Py-stack.  It
includes both "local" and "nonlocal" LIFO allocation.  Local allocation is
intended to be equivalent to using alloca(), whereby the same function must
free the memory.  Nonlocal allocation is where another function may free
the memory, so long as it's still LIFO.

Follow-up patches will convert all uses of alloca() and VLA to the new
scoped allocation API.  The old behaviour (using alloca()) will still be
available, but when MICROPY_ENABLE_PYSTACK is enabled then alloca() is no
longer required or used.

The benefits of enabling this option are (or will be once subsequent
patches are made to convert alloca()/VLA):
- Toolchains without alloca() can use this feature to obtain correct and
  efficient scoped memory allocation (compared to using the heap instead
  of alloca(), which is slower).
- Even if alloca() is available, enabling the Py-stack gives slightly more
  efficient use of stack space when calling nested Python functions, due to
  the way that compilers implement alloca().
- Enabling the Py-stack with the stackless mode allows for even more
  efficient stack usage, as well as retaining high performance (because the
  heap is no longer used to build and destroy stackless code states).
- With Py-stack and stackless enabled, Python-calling-Python is no longer
  recursive in the C mp_execute_bytecode function.

The micropython.pystack_use() function is included to measure usage of the
Python stack.
2017-12-11 13:49:09 +11:00
Paul Sokolovsky dea3fb93c7 py/gc: In sweep debug output, print pointer as a pointer.
Or it will be truncated on a 64-bit platform.
2017-12-09 01:54:01 +02:00
Paul Sokolovsky 5453d88d5d py/gc: Factor out a macro to trace GC mark operations.
To allow easier override it for custom tracing.
2017-12-09 01:48:26 +02:00
Paul Sokolovsky 9ef4be8b41 py/gc: Add CLEAR_ON_SWEEP option to debug mis-traced objects.
Accessing them will crash immediately instead still working for some time,
until overwritten by some other data, leading to much less deterministic
crashes.
2017-12-08 00:10:44 +02:00
Damien George 74fad3536b py/gc: In gc_realloc, convert pointer sanity checks to assertions.
These checks are assumed to be true in all cases where gc_realloc is
called with a valid pointer, so no need to waste code space and time
checking them in a non-debug build.
2017-11-29 17:17:08 +11:00
Damien George a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Stefan Naumann ace9fb5405 py: Add verbose debug compile-time flag MICROPY_DEBUG_VERBOSE.
It enables all the DEBUG_printf outputs in the py/ source code.
2017-08-15 11:53:36 +10:00
Alexander Steffen 55f33240f3 all: Use the name MicroPython consistently in comments
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
Damien George 12d4fa9b37 py/gc: Refactor assertions in gc_free function.
gc_free() expects either NULL or a valid pointer into the heap, so the
checks for a valid pointer can be turned into assertions.
2017-07-12 12:17:38 +10:00
Damien George c7e8c6f7de py/gc: Execute finaliser code in a protected environment.
If a finaliser raises an exception then it must not propagate through the
GC sweep function.  This patch protects against such a thing by running
finaliser code via the mp_call_function_1_protected call.

This patch also adds scheduler lock/unlock calls around the finaliser
execution to further protect against any possible reentrancy issues: the
memory manager is already locked when doing a collection, but we also don't
want to allow any scheduled code to run, KeyboardInterrupts to interupt the
code, nor threads to switch.
2017-04-12 13:52:04 +10:00
Damien George 5ffe1d8dc0 py/gc: Add MICROPY_GC_CONSERVATIVE_CLEAR option to always zero memory.
There can be stray pointers in memory blocks that are not properly zero'd
after allocation.  This patch adds a new config option to always zero all
allocated memory (via gc_alloc and gc_realloc) and hence help to eliminate
stray pointers.

See issue #2195.
2016-08-26 15:35:26 +10:00
Paul Sokolovsky 93e353e384 py/gc: Implement GC running by allocation threshold.
Currently, MicroPython runs GC when it could not allocate a block of memory,
which happens when heap is exhausted. However, that policy can't work well
with "inifinity" heaps, e.g. backed by a virtual memory - there will be a
lot of swap thrashing long before VM will be exhausted. Instead, in such
cases "allocation threshold" policy is used: a GC is run after some number of
allocations have been made. Details vary, for example, number or total amount
of allocations can be used, threshold may be self-adjusting based on GC
outcome, etc.

This change implements a simple variant of such policy for MicroPython. Amount
of allocated memory so far is used for threshold, to make it useful to typical
finite-size, and small, heaps as used with MicroPython ports. And such GC policy
is indeed useful for such types of heaps too, as it allows to better control
fragmentation. For example, if a threshold is set to half size of heap, then
for an application which usually makes big number of small allocations, that
will (try to) keep half of heap memory in a nice defragmented state for an
occasional large allocation.

For an application which doesn't exhibit such behavior, there won't be any
visible effects, except for GC running more frequently, which however may
affect performance. To address this, the GC threshold is configurable, and
by default is off so far. It's configured with gc.threshold(amount_in_bytes)
call (can be queries without an argument).
2016-07-21 00:37:30 +03:00
Paul Sokolovsky 749cbaca7f py/gc: Calculate (and report) maximum contiguous free block size.
Just as maximum allocated block size, it's reported in allocation units
(not bytes).
2016-07-01 00:09:55 +03:00
Paul Sokolovsky 6a6e0b7e05 py/gc: Be sure to count last allocated block at heap end in stats.
Previously, if there was chain of allocated blocks ending with the last
block of heap, it wasn't included in number of 1/2-block or max block
size stats.
2016-06-30 12:56:21 +03:00
Damien George a1c93a62b1 py: Don't use gc or qstr mutex when the GIL is enabled.
There is no need since the GIL already makes gc and qstr operations
atomic.
2016-06-28 11:28:50 +01:00
Damien George 3653f5144a py/gc: Fix GC+thread bug where ptr gets lost because it's not computed.
GC_EXIT() can cause a pending thread (waiting on the mutex) to be
scheduled right away.  This other thread may trigger a garbage
collection.  If the pointer to the newly-allocated block (allocated by
the original thread) is not computed before the switch (so it's just left
as a block number) then the block will be wrongly reclaimed.

This patch makes sure the pointer is computed before allowing any thread
switch to occur.
2016-06-28 11:28:49 +01:00
Damien George e33806aaff py/gc: Fix 2 cases of concurrent access to ATB and FTB. 2016-06-28 11:28:49 +01:00
Damien George c93d9caa8b py/gc: Make memory manager and garbage collector thread safe.
By using a single, global mutex, all memory-related functions (alloc,
free, realloc, collect, etc) are made thread safe.  This means that only
one thread can be in such a function at any one time.
2016-06-28 11:28:49 +01:00
Damien George 330165a2cc py: Add MP_STATE_THREAD to hold state specific to a given thread. 2016-06-28 11:09:31 +01:00
Paul Sokolovsky 68a7a92cec py/gc: gc_dump_alloc_table(): Dump heap offset instead of actual address.
Address printed was truncated anyway and in general confusing to outsider.
A line which dumps it is still left in the source, commented, for peculiar
cases when it may be needed (e.g. when running under debugger).
2016-05-13 00:16:38 +03:00
Paul Sokolovsky 9a8751b006 gc: gc_dump_alloc_table(): Use '=' char for tail blocks.
'=' is pretty natural character for tail, and gives less dense picture
where it's easier to see what object types are actually there.
2016-05-13 00:16:38 +03:00
Paul Sokolovsky bc04dc277e py/gc: Make (byte)array type dumping conditional on these types being enabled. 2016-05-11 19:21:53 +03:00
Paul Sokolovsky 3d7f3f00e0 py/gc: gc_dump_alloc_table(): Show byte/str and (byte)array objects.
These are typical consumers of large chunks of memory, so it's useful to
see at least their number (how much memory isn't clearly shown, as the data
for these objects is allocated elsewhere).
2016-05-11 19:00:15 +03:00
Paul Sokolovsky 3ea03a1188 py/gc: Improve mark/sweep debug output.
Previously, mark operation weren't logged at all, while it's quite useful
to see cascade of marks in case of over-marking (and in other cases too).
Previously, sweep was logged for each block of object in memory, but that
doesn't make much sense and just lead to longer output, harder to parse
by a human. Instead, log sweep only once per object. This is similar to
other memory manager operations, e.g. an object is allocated, then freed.
Or object is allocated, then marked, otherwise swept (one log entry per
operation, with the same memory address in each case).
2015-12-27 20:40:36 +02:00
Damien George acaccb37ec py/gc: When printing info, use %u instead of UINT_FMT for size_t args.
Ideally we'd use %zu for size_t args, but that's unlikely to be supported
by all runtimes, and we would then need to implement it in mp_printf.
So simplest and most portable option is to use %u and cast the argument
to uint(=unsigned int).

Note: reason for the change is that UINT_FMT can be %llu (size suitable
for mp_uint_t) which is wider than size_t and prints incorrect results.
2015-12-18 12:52:45 +00:00
Damien George d977d268e8 py/gc: Use size_t instead of mp_uint_t to count things related to heap.
size_t is the correct type to use to count things related to the size of
the address space.  Using size_t (instead of mp_uint_t) is important for
the efficiency of ports that configure mp_uint_t to larger than the
machine word size.
2015-12-16 20:09:11 -05:00
Damien George f7782f8082 py/gc: For finaliser, interpret a pointer into the heap as concrete obj. 2015-12-16 19:45:42 -05:00