3a37426b29
esp8266/scripts/inisetup.py: Use "-" in AP ESSID instead of space.
2016-04-12 00:47:21 +03:00
260b839483
esp8266/scripts/inisetup.py: Set WPA/WPA2 AP mode with a predefined password.
2016-04-12 00:46:04 +03:00
40f5ecd3a8
esp8266: Add Python modules for initial configuration.
...
Main entry point is _boot.py which checks whether FAT FS in flash mountable,
and if so, mounts it. Otherwise, it checks if flash is empty, and if so,
performs initial module setup: makes FAT FS, configures default AP name,
etc. As a last option, if flash is not empty, and could not be mounted,
it means filesystem corruption, and warning message with instructions is
printed in an infinite loop.
2016-04-12 00:37:04 +03:00
2f5935269b
esp8266/scripts/main.py: Remove stale file.
2016-04-12 00:35:13 +03:00
54b89665fc
esp8266/modnetwork: .config(): Add "password" param (W/O).
2016-04-12 00:18:40 +03:00
7acc252e93
esp8266/modnetwork: .config(): Add "authmode" param.
2016-04-12 00:17:31 +03:00
6f3fc9bfa1
esp8266/modnetwork: .config(): Check interface whose config is requested.
2016-04-12 00:16:16 +03:00
1a327c4fa3
unix: Build with MICROPY_PY_UHASHLIB_SHA1 if already building with axTLS.
2016-04-11 21:58:58 +03:00
f49d63a75c
esp8266: Enable websocket module.
2016-04-11 21:25:43 +03:00
9b0a150bd6
docs: Bump version to 1.7.
2016-04-11 12:18:10 +01:00
f8fb4470a0
extmod/modwebsocket: write(): Support write size beyond 125 bytes.
2016-04-11 14:07:57 +03:00
7063210014
extmod/modlwip: Fix for loss of data in unaccepted incoming sockets.
...
When lwIP creates a incoming connection socket of a listen socket, it
sets its recv callback to one which discards incoming data. We set
proper callback only in accept() call, when we allocate Python-level
socket where we can queue incoming data. So, in lwIP accept callback
be sure to set recv callback to one which tells lwIP to not discard
incoming data.
2016-04-11 01:21:34 +03:00
1cc81ed449
esp8266/modesp: Add freemem() and meminfo() functions.
...
They call into vendor SDK functions system_get_free_heap_size() and
system_print_meminfo() respectively.
2016-04-11 01:16:38 +03:00
c734de490a
esp8266/main: mp_builtin_open(): Implement, using vfs_proxy_call().
2016-04-10 16:59:19 +03:00
358e5d8bad
py/stream: Move uPy func obj wrappers to below their respective funcs.
2016-04-10 12:41:28 +01:00
657aef66ff
py/stream: Simplify arg extraction logic for stream_ioctl.
...
Saves 16 bytes of code.
Also, use mp_obj_get_int_truncated to allow integers as big as a machine
word to be passed as the value.
2016-04-10 12:37:59 +01:00
6e87aeb841
esp8266: Implement multistage bootstrap sequence.
...
Upon start-up, _boot module is executed from frozen files to do early
initialization, e.g. create and mount the flash filesystem. Then
"boot.py" is executed if it exists in the filesystem. Finally, "main.py"
is executed if exists to allow start-on-boot user applications.
This allows a user to make a custom boot file or startup application
without recompiling the firmware, while letting to do early initialization
in Python code.
Based on RFC https://github.com/micropython/micropython/issues/1955 .
2016-04-10 14:24:41 +03:00
b69f798c92
extmod/modwebsocket.h: Split websocket-related defines for reuse.
2016-04-10 13:42:51 +03:00
558fd5d228
py/stream: ioctl(): Properly support 2-arg form.
2016-04-10 13:36:44 +03:00
6c3db26ab7
py/stream: Fix signed comparison issue.
2016-04-10 13:31:52 +03:00
d6236e85c2
extmod/modwebsocket: Implement MP_STREAM_SET_DATA_OPTS ioctl.
...
Allows to set fragment type (txt/bin/etc.) for output records.
2016-04-10 13:19:26 +03:00
6837dba6b8
extmod/modwebsocket: Allow to get type of last read data using ioctl().
2016-04-10 12:50:46 +03:00
0c97e4c414
py/stream: Add Python-level ioctl() method.
...
Will call underlying C virtual methods of stream interface. This isn't
intended to be added to every stream object (it's not in CPython), but
is convenient way to expose extra operation on Python side without
adding bunch of Python-level methods.
2016-04-10 12:45:46 +03:00
a45e280c58
py/stream.h: Add bigger inventory of stream ioctl's.
2016-04-10 12:42:41 +03:00
f38e8f5217
extmod/modwebsocket: Record current fragment type (binary/text/etc.)
...
Also, handle continuation frames (untested).
2016-04-09 16:14:47 +03:00
5b1c221785
extmod/modwebsocket: Add option for blocking writes to non-blk sockets.
...
This is strange asymmetry which is sometimes needed, e.g. for WebREPL: we
want to process only available input and no more; but for output, we want
to get rid of all of it, because there's no other place to buffer/store
it. This asymmetry is akin to CPython's asyncio asymmetry, where reads are
asynchronous, but writes are synchronous (asyncio doesn't expect them to
block, instead expects there to be (unlimited) buffering for any sync write
to completely immediately).
2016-04-09 16:03:38 +03:00
397b705647
extmod/modwebsocket: Reset mask between packets.
2016-04-09 12:29:18 +03:00
7e9182f3aa
extmod/modwebsocket: Make sure to propagate EOF.
2016-04-08 20:26:54 +03:00
b32b0d38fe
unix: freedos strip and size names for binaries
...
After this you need only one path for build (path/to/djgpp/bin). Original patch made by @dhylands
2016-04-08 20:15:37 +03:00
20d9bc2d76
extmod/modure: re_exec() renamed to ure_exec() due to collison in 4.3BSD.
...
Addresses issue #1972 .
2016-04-08 20:12:03 +03:00
05ba2433f6
extmod/modwebsocket: Properly check number of args to constructor.
2016-04-08 16:05:48 +03:00
5e919b7ef8
lib/axtls: Update to the latest upstream master.
2016-04-08 15:19:57 +03:00
9c04299da1
docs: esp8266: Enable "machine" module docs.
...
The docs are still heavily biased towards WiPy, so will need a lot of
exclusions.
2016-04-07 16:44:10 +03:00
5e7fa7c80c
docs/ubinascii: Document non-standard "sep" argument to hexlify().
2016-04-07 12:39:00 +03:00
8a8e775035
stmhal: Consistently enable USB SOF Irqs for all USB modes (FS and HS).
...
SOF irqs are now standard for rx/tx USB transfers, so enable them for both
FS and HS modes. Fixes #1944 .
2016-04-07 09:23:33 +01:00
04d5e644fc
py/objarray: Fix array.append so it doesn't extend if append fails.
...
Addresses issue #1965 .
2016-04-07 09:03:33 +01:00
2c915e1ae6
py: Implement basic with support in native emitter.
2016-04-07 08:53:24 +01:00
ce8b4e8749
py: Combine continuous block of emit steps into with_cleanup emit call.
...
Because different emitters need to handle with-cleanup in different ways.
2016-04-07 08:50:38 +01:00
2c407bcf20
esp8266: Switch from terse error messages to normal ones.
...
Adds 2k to the code size.
2016-04-07 00:38:08 +03:00
d85439fd19
esp8266/README: Add short troubleshooting section.
2016-04-07 00:21:04 +03:00
1a0a323ca8
esp8266: Add initial implementation of machine.UART.
...
Currently UART(0) and UART(1) are exposed and only uart.write works.
2016-04-06 19:45:52 +03:00
4e51a3038c
cc3200/mods/modwlan: Include stream.h after recent refactor.
2016-04-06 01:18:39 +03:00
96eca22322
esp8266: Make destination for vendor OS debug output soft-configurable.
...
Use esp.osdebug(None) to disable, or esp.osdebug(uart_id) to send output
to a UART.
2016-04-06 00:12:58 +03:00
e6a4d4e23c
py: Move stream-related declarations from obj.h to stream.h.
2016-04-05 22:06:52 +03:00
e4cb7c6158
docs/esp8266/quickref: Add note about physical vs logical pin numbers.
2016-04-05 16:30:51 +03:00
2c8356c482
esp8266/modnetwork: require_if(): Report the actual interface required.
2016-04-05 16:09:03 +03:00
f81ea6307c
docs/ubinascii: Document a2b_base64(), b2a_base64().
2016-04-05 14:00:12 +03:00
de12502d89
esp8266: Move pyb.unique_id() to machine.unique_id().
2016-04-05 00:57:49 +03:00
81fd5685fc
esp8266: Move pyb.hard_reset() to machine.reset().
2016-04-05 00:20:25 +03:00
1b811b946e
unix/modsocket: Use mp_const_empty_map instead of creating empty map.
2016-04-04 23:43:16 +03:00
Damien George
Paul Sokolovsky
pohmelie
Tom Sparks
Martin Fischer