Commit Graph

16 Commits

Author SHA1 Message Date
Scott Shawcroft 40118bcf57
Add `board_deinit` for use with sleep
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)

Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.

Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.

ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.

Fixes #3786
2020-12-08 10:52:25 -08:00
Dan Halbert dbfabddf58 rename ESP TX and RX pins; remove support 2020-11-30 11:11:04 -05:00
Dan Halbert 848eb28132 esp-uart-pins 2020-11-28 14:52:56 -05:00
Scott Shawcroft 0f003ac5b8
Reorganize board busses into shared-bindings and shared-module. 2019-04-08 16:58:50 -07:00
caternuson 46fc8a8a86 change order so SPEAKER is first 2019-03-11 17:45:27 -07:00
caternuson 53b7055283 add SPEAKER pin alias for PyPortal 2019-03-11 15:12:29 -07:00
Dan Halbert fb027f2024 Update PyPortal pins to rev C 2019-03-01 09:06:03 -05:00
ladyada 85421f9766 final pin names, tested with final release 2019-02-23 15:40:28 -05:00
TG-Techie d453b605d3
make it easier for people to hookup in spi mode without looking inspecting schematic 2019-02-18 15:00:14 -05:00
TG-Techie e901317fd7
PYPORTAL: pindefs incorrect
@jerryneedell  suggested the pins could be wrong when I told him I was getting reading that didn't change, having corrected the pinout to match the schematic I was given it now works! 

used:
```
ts = adafruit_touchscreen.Touchscreen(board.TOUCH_XL, board.TOUCH_XR,
                                      board.TOUCH_YD, board.TOUCH_YU,
                                      calibration=((5200, 59000), (5800, 57000)),
                                      size=(320, 240))

while True:
    p = ts.touch_point
    if p:
        time.sleep(.5)
        print(p)
```
2019-02-12 22:18:36 -05:00
Scott Shawcroft 41dad1ea1e
Fix pin defs 2019-01-18 11:43:35 -08:00
Scott Shawcroft 2d136d58bf
Fix other builds and hallowing 2019-01-17 14:45:29 -08:00
Scott Shawcroft 84292ad890
External fourwire works and blinka splash after 2019-01-17 00:20:16 -08:00
ladyada 19b6c5c802 more pins! 2019-01-16 01:49:12 -05:00
Scott Shawcroft 19db886645
Support the display on the pyportal.
Also fix #1390, reload during sleep broken.
2019-01-10 17:29:34 -08:00
Scott Shawcroft d3aeca104e
Initial pass at pyportal board define. 2019-01-07 14:56:54 -08:00