019aecaa20
Support BLE advertising on ESP
...
Services and characteristics still won't work.
Progress on #5926
2022-01-27 17:40:37 -08:00
fff68c9f86
Merge pull request #5927 from tannewt/esp_ble_scan
...
Add BLE scanning for S3 and C3.
2022-01-27 13:05:24 -05:00
d9966c1724
Add TODOs and -Os for RISC-V
2022-01-26 17:07:20 -08:00
e409ff75cd
Turn off BLE HCI on ESP32-S2
2022-01-26 09:46:29 -08:00
66cf66f118
Fixed common_hal_busio_uart_deinited incorrect pin assignment check.
...
The pin must be tested instead of pin->number in the same way as in STM
I2C busio layer.
2022-01-26 17:46:42 +01:00
fa2d156d14
return default cpu frequency on espressif
2022-01-26 12:32:48 +05:30
b2e1dbd2df
Implement name and address get/set
2022-01-25 19:17:26 -08:00
5a6f456dbb
Add BLE scanning for S3 and C3.
...
Everything else should raise NotImplementedError.
First step in #5926
2022-01-25 16:28:46 -08:00
9c31346c45
fix implmetation
2022-01-25 16:42:49 -05:00
70512758a9
enable binascii in microbit_v2 build
2022-01-25 16:06:47 -05:00
4a3c636b6b
Merge pull request #5874 from dkulinski/epaper_two_byte_length
...
Update EPaperDisplay to allow for two byte sequence length
2022-01-25 11:13:36 -08:00
19f9163892
Bringing branch up to date with current main
2022-01-25 11:02:00 -07:00
324ff9c30d
bump idf to latest commit on v4.4 branch
2022-01-25 18:01:09 +05:30
60801066b2
Fix magtag, openbook for EPaperDisplay constructor
2022-01-24 12:34:01 -07:00
367a1d53c0
Fixes for pulsein on ESP32S3
2022-01-23 13:14:34 -06:00
4d78e3401c
Fix esp32s3 devkitc uart naming and add board.UART
2022-01-22 15:25:33 +11:00
5933c04499
Merge pull request #5899 from tannewt/rp2040_winbond
...
Add winbond to Feather RP2040
2022-01-21 16:44:52 -05:00
9a353a4f56
Merge pull request #5422 from Neradoc/nera-secondary-I2C
...
Allow multiple board buses
2022-01-21 11:08:14 -08:00
f2713afff6
Merge pull request #5896 from dhalbert/open-modes-check
...
Validate open() mode
2022-01-21 10:50:43 -08:00
c598ede84e
Add winbond to Feather RP2040
2022-01-21 10:34:38 -08:00
3970aa5a5e
fix build failure on two boards
2022-01-21 10:11:33 +05:30
67293c265c
Merge branch 'main' into board-bus
2022-01-21 10:08:39 +05:30
dab35f7c72
Merge pull request #5880 from jepler/espressif-serial-trick-uf2
...
Request ROM bootloader when resetting using the 'serial trick'
2022-01-21 09:56:12 +05:30
fed5227de9
shrink stringcar_m0_express
2022-01-20 20:34:04 -05:00
ea30a8ac04
Reboot into the ROM bootloader from 1200 baud
...
Per Scott, the purpose of this trick is to make the board programmable from Arduino even when CP is installed, so my convenience of escaping into UF2 is not going to work out.
2022-01-20 18:50:50 -06:00
35175715f9
Check target defined
2022-01-20 14:11:33 -08:00
d99847b410
Refactor pin reset on ESP
...
This makes it easier to blanket never reset flash and USB pins. It
also allows us to set a custom state after reset. The first case
is for the double tap reset that needs to be pulled low.
Fixes #5893
2022-01-20 12:40:41 -08:00
13db65566d
ESP NeoPixel fixes
...
This tweaks the RMT timing to better match the 1/3 and 2/3 of 800khz
guideline for timing. It also ensures a delay of 300 microseconds
with the line low before reset.
Pin reset is now changed to the IDF default which pulls the pin up
rather than CircuitPython's old behavior of floating the pin.
Fixes #5679
2022-01-19 16:29:07 -08:00
8bae6af12a
Merge pull request #5888 from tannewt/esp_tick_core
...
Ensure supervisor_tick is run on the same core as CP
2022-01-19 19:26:50 -05:00
880d43a4f7
Fix pin typo.
2022-01-19 17:04:30 -05:00
42fbebe62a
Merge pull request #5832 from ladyada/main
...
ESP32S2 camera board draft
2022-01-19 12:04:13 -08:00
78942112c7
Ensure supervisor_tick is run on the same core as CP
2022-01-19 11:36:40 -08:00
f13ea93fe6
fix A5 pin name
2022-01-19 14:22:01 -05:00
6d7472357d
newline
2022-01-18 20:46:09 -05:00
7ee5c01cf8
Add Espressif C3 dev board
2022-01-18 17:39:52 -08:00
09cf95a51c
no psram :(
2022-01-18 20:14:17 -05:00
de45a20b08
EOF
2022-01-18 20:14:17 -05:00
71c792d608
try initial esp32s3 qtpy def
2022-01-18 20:14:17 -05:00
d4dab79234
add buttonpin
2022-01-18 20:14:17 -05:00
c1cee63c5a
fix tuplecompile
2022-01-18 20:14:17 -05:00
1d44bf1c0c
add camera data port
2022-01-18 20:14:17 -05:00
3381ac149e
fix camera display io to use default spi bus
2022-01-18 20:14:16 -05:00
13b319c430
try rotation 0
2022-01-18 20:14:16 -05:00
e9f0c1796e
oof fix i2c lines!
2022-01-18 20:14:16 -05:00
4400124efe
snappysnap
2022-01-18 20:14:16 -05:00
8b26f594c9
try not resetting i2c power
2022-01-18 20:14:16 -05:00
647b894e7b
?? some include needed
2022-01-18 20:14:16 -05:00
9c933558b5
enable I2C by default
2022-01-18 20:14:15 -05:00
872beeccfe
Merge remote-tracking branch 'origin/main' into espressif-serial-trick-uf2
2022-01-18 19:07:05 -06:00
c839d9b3cc
Fix S2 builds by not turning on USB with wifi
2022-01-18 15:50:32 -08:00
679f4b30ba
Tweak heap sizes for different targets
2022-01-18 15:23:19 -08:00
09bdad6c5b
Merge pull request #5877 from 0hotpotman0/main
...
Add softdev_version 7.0.1
2022-01-17 21:39:12 -05:00
49b8579bcd
Request UF2 bootloader when resetting using the 'serial trick'
2022-01-17 17:14:31 -06:00
3453ced296
Merge pull request #5860 from tannewt/s3_core_1
...
Switch CP to core 1 on S3
2022-01-17 16:10:05 -05:00
895a8a9e72
Merge pull request #5866 from dhalbert/espressif-open-drain
...
fix espressif DigitalInOut open-drain
2022-01-17 12:51:31 -06:00
9b9dd97e00
add softdev_version 7.0.1
2022-01-17 14:49:11 +08:00
784a5edc4b
Define default SPI pins on kb2040
...
Fixes #5875
2022-01-17 06:52:08 +01:00
11848b1826
use GPIO_MODE_ instead of GPIO_MODE_DEF
2022-01-15 23:05:33 -05:00
c70c8a9390
fix espressif open-drain
2022-01-15 19:54:31 -05:00
f6cf15de43
Switch CP to core 1 on S3
2022-01-14 12:22:38 -08:00
993e51e5cc
Fix USB when enabling wifi
2022-01-14 11:52:14 -08:00
7af7cd418c
Merge pull request #5853 from tannewt/s3_config_rework
...
Split out target specific configs.
2022-01-14 10:25:50 -08:00
86e7247d11
Merge pull request #5854 from jepler/issue-5680
...
patch esp-idf for i2c crash
2022-01-14 09:37:23 -08:00
c87d9c947b
patch esp-idf for i2c crash
...
In theory, this Closes : #5680 -- I didn't test it on HW yet.
2022-01-14 08:53:24 -06:00
869cf5eba5
Run USB on the same core as CP
2022-01-13 15:55:37 -08:00
39639ecd17
Rework configs to take target into account
...
New script will filter settings to different tiers.
2022-01-13 15:55:37 -08:00
2233026556
Merge pull request #5848 from prplz/esp32s3-devkits
...
Esp32s3 devkits
2022-01-13 14:02:44 -08:00
59275c7225
Merge pull request #5846 from jepler/feather-esp32s2-tft-spi
...
feather esp32s2 tft: fix sharing of main display bus
2022-01-12 23:05:42 -05:00
a878e3377c
Rename espressif_esp32s3_devkitc_1 to devkitc_1_n8r2
2022-01-13 13:24:06 +11:00
212eedc42f
Rename espressif_esp32s3_devkitc_1_nopsram to devkitc_1_n8
2022-01-13 13:24:06 +11:00
7575cacdc5
Add espressif_esp32s3_devkitc_1_n8r8
2022-01-13 13:24:06 +11:00
1022866d95
Merge pull request #5844 from kattni/add-button-pin
...
Add button pin to Feathers, fix pin order on QT Py.
2022-01-12 18:11:46 -05:00
10c3836bc0
feather esp32s2 tft: fix sharing of main display bus
2022-01-12 14:35:00 -06:00
ae58858036
Merge pull request #5820 from CharString/waveshare_rp2040_zero
...
Waveshare RP2040-Zero board definition
2022-01-12 10:56:55 -08:00
fb96c09118
Add button pin to Feathers, fix pin order on QT Py.
2022-01-12 13:54:56 -05:00
d5ca7f0348
Merge pull request #5842 from dhalbert/pdmin-fix
...
Fixes SAMD PDMIn
2022-01-12 10:50:04 -08:00
dd54e8f657
PDMIn: enable IRQ; need a volatile; call pdmin_reset()
...
enable IRQ for PDMIn
2022-01-12 11:44:43 -05:00
8226fb8e0b
Bring pins in line with board documentation.
...
This brings the pins in line with the documented [pinouts]. The only
"special" pins:
- GP0, GP1 are mentioned as the default UART, so we init them as
such and give them the TX and RX alternative names.
- GP16 is connected to the onboard neopixel DIN line and we assign it
the NEOPIXEL name. (Power of the neopixel is connected to the 3.3V
rail, not a pin. See [schematic].)
- GP26, GP27, GP28, GP29 have unambiguous ADC designations in the
[pinouts], so we assign the `A` analogue names as the Pico board
definition does.
[pinouts]: https://www.waveshare.com/wiki/RP2040-Zero#Pinouts
[schematic]: https://www.waveshare.com/w/upload/4/4c/RP2040_Zero.pdf
2022-01-12 12:27:54 +01:00
9b825869c5
raspberrypi : Check UART before claiming pins, claim it after
...
Co-authored-by: Scott Shawcroft <scott@adafruit.com>
2022-01-11 22:02:47 +01:00
2251d0f4b0
raspberrypi: Claim UART after checking pins
...
If, for some reason, you mix up TX and RX when calling `busio.UART` (who would do that ;) ), you get `Invalid pins`. When you go to try again, you'll get `All UART peripherals are in use` because the interface was claimed as busy before pins are verified. This should fix that issue.
2022-01-11 15:13:36 +01:00
d23d2e7bf4
Merge pull request #5819 from tannewt/piunora
...
Add Piunora and Zero. Also, enable full build
2022-01-10 19:33:23 -05:00
968c57e045
Merge pull request #5829 from kattni/tft-feather-pin-fix
...
Fix typo, pin order.
2022-01-10 15:25:45 -05:00
838a007ca9
Merge pull request #5813 from EmergReanimator/code_improvements
...
Introduced ringbuf_init to perform static buffer initialisation
2022-01-10 12:12:25 -08:00
4efbfca2b0
Fix typo, pin order.
2022-01-10 14:45:54 -05:00
86a482f520
add ble stack 7.3.0 version for complie the uf2 flie
2022-01-10 11:05:06 +08:00
e23b272595
Added missing LDO control pin (SARA_PWR)
2022-01-08 16:39:48 +01:00
783106545c
Remove LED pin.
...
There's just the NEOPIXEL on this board, no other LED.
2022-01-07 23:25:50 +01:00
d8f18d36a4
Initial Waveshare RP2040-Zero board definition
...
`board.NEOPIXEL` works. Once you have an LED cycling colours, you're 99%
done. :-)
2022-01-07 23:20:10 +01:00
bec36f5c7f
Add Pi Zero and update PIDs
2022-01-07 11:47:31 -08:00
39a239113f
Enable neopixel for status
2022-01-07 11:23:50 -08:00
3238d8364d
Piunora + full build + high speed usb
2022-01-07 11:23:50 -08:00
5f32d1f34b
Piunora pinout
2022-01-07 11:23:49 -08:00
fb6ab72392
Merge pull request #5816 from bd34n/bdmicro_vina_d51_led_aux
...
ports/atmel-samd/boards/bdmicro_vina_d51/pins.c: Add LED_AUX pin.
2022-01-07 10:47:32 -08:00
afd686986a
Merge pull request #5800 from tannewt/rpi_zero
...
Initial Pi Zero support
2022-01-07 09:05:30 -05:00
1fb4f02de2
ports/atmel-samd/boards/bdmicro_vina_d51/pins.c: Add LED_AUX pin.
2022-01-06 16:32:17 -05:00
fa272f5a70
Fix iMX and zero_w build extension
2022-01-06 10:24:02 -08:00
2a2f94df15
Update tinyusb for zero support
2022-01-06 08:52:33 -08:00
12046323a2
Fixed unit port build issue
2022-01-06 09:27:44 +01:00
48d826b15d
Never reset SD card pins
2022-01-04 19:08:14 -08:00
38d2472683
Fix cache detection on 64 bit
2022-01-04 17:38:29 -08:00
Scott Shawcroft
Dan Halbert
EmergReanimator
microDev
jerryneedell
Scott Shawcroft
Dan Kulinski
root
Michael Himing
Dan Halbert
Jeff Epler
Kattni Rembor
lady ada
Jeff Epler
0hotpotman0
Neradoc
Chris Wesseling
arturo182
Pontus Oldberg
Chris Wesseling
Brian Dean