Commit Graph

1384 Commits

Author SHA1 Message Date
Jeff Epler 791d20f16c give qtpy haxpress its own USB PID 2020-09-26 11:45:53 -05:00
Jeff Epler 9944935fde qtpy haxpress: enable RTC 2020-09-26 11:33:10 -05:00
Jeff Epler eadb4de144 qtpy_m0_haxpress: add 2020-09-24 16:58:24 -05:00
Scott Shawcroft bcabf5e019
Merge pull request #3457 from ladyada/qtpy_m0
fix pins for rev C
2020-09-23 11:31:28 -07:00
lady ada 9db7625717 neopix is default on! 2020-09-23 11:19:01 -04:00
lady ada 5384479a61 fix pins for rev C 2020-09-22 23:28:23 -04:00
Jeff Epler 59580d0f2d canio: Fix implementation bugs in atmel-sam 2020-09-22 09:36:29 -05:00
Jeff Epler 4869dbdc67 canio: rename from _canio
This reflects our belief that the API is stable enough to avoid incompatible changes during 6.x.
2020-09-21 16:44:26 -05:00
Jeff Epler 9e8f1820c8 canio.CAN: switch rx/tx, make both mandatory, move declarations around 2020-09-21 16:44:26 -05:00
Jeff Epler 4e4853dcb2 common.template.ld: remove unneeded line 2020-09-21 16:44:26 -05:00
Jeff Epler df379b84cb remove unneeded symbols 2020-09-21 16:44:26 -05:00
Jeff Epler 7fd6cab2ac canio: Make both tx and rx (but not both) optional
.. loopback and silent come from the (optional) constructor parameters
not guessing based on the pin specification

.. docstring & comment improvements
2020-09-21 16:44:26 -05:00
Jeff Epler 09f8a83a75 samd: template.ld: put canram in its own output section 2020-09-21 16:44:26 -05:00
Jeff Epler a76119afcb add _canio to Feather M4 CAN 2020-09-21 16:44:26 -05:00
Jeff Epler 67d8f108bb Add CAN to SAM E51 clock config 2020-09-21 16:44:26 -05:00
Jeff Epler 44c5b2bbb1 Respond to review comments
Thanks @tannewt!
2020-09-21 16:44:26 -05:00
Jeff Epler 58b920ed97 fix whitespace 2020-09-21 16:44:26 -05:00
Jeff Epler 27cbb690e5 _canio: Add listener matching
Lightly tested:
 * no matches (catch-all)
 * standard address single address matches (even and odd positions)
 * standard address mask matches
 * only tested that extended doesn't match non-extended
2020-09-21 16:44:26 -05:00
Jeff Epler 635fcadb59 _canio.CAN: add error handling & bus state 2020-09-21 16:44:26 -05:00
Jeff Epler a2e1867f69 _canio: Minimal implementation for SAM E5x MCUs
Tested & working:

 * Send standard packets
 * Receive standard packets (1 FIFO, no filter)

Interoperation between SAM E54 Xplained running this tree and
MicroPython running on STM32F405 Feather with an external
transceiver was also tested.

Many other aspects of a full implementation are not yet present,
such as error detection and recovery.
2020-09-21 16:44:26 -05:00
Jeff Epler 183649aad8 samd: move mcu_find_pin_function to header
.. it'll be used in can as well as sdio
2020-09-21 16:44:07 -05:00
Dan Halbert 9cc803eb95
Merge pull request #3432 from bd34n/rename-bdmicro-vina-m0-d21
Rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles.
2020-09-19 13:41:21 -04:00
Dan Halbert 5116375604
Merge pull request #3436 from jepler/fix-spi-sercom4
samd: SPI: improve conditional code
2020-09-18 19:14:39 -04:00
Dan Halbert 23dd7c7c96
Merge pull request #3435 from jepler/fix-sdhc1
sdioio: fix code for the case where there is no SDHC1
2020-09-18 17:10:59 -04:00
Dan Halbert 550b42e4d3
Merge pull request #3434 from jepler/same54-disable-cpu-voltage
sam e54: disable microcontroller.cpu.voltage
2020-09-18 15:20:43 -04:00
Jeff Epler 45eec5b5a5 samd: SPI: improve conditional code
I recently misdiagnosed a "maybe-uninitialized" diagnostic as a bug in
asf4.  However, the problem was in our SPI code.

A special case for samr21 MCUs was being applied to same54p20a and possibly
other D5x/E5x MCUs, since the check was simply for pin PC19 existing at all.

Change the check to use the macro PIN_PC19F_SERCOM4_PAD0 which is only
defined if special function F of pin PC19 is SERCOM4 PAD0.

Reorganize the code a little bit so that brace-matching in editors is
not confused by the conditionalized code, including an unrelated change
for APA102_SCK's condition.

Revert the change to the Makefile that incorrectly attempted to silence
the diagnostic.
2020-09-17 18:30:22 -05:00
Jeff Epler c73182803d sdioio: fix code for the case where there is no SDHC1
.. it doesn't really make a difference (the old code created an empty
else{} statement) but this is more correct.
2020-09-17 18:29:31 -05:00
Jeff Epler 1b29ceaf1a sam e54: disable microcontroller.cpu.voltage
This hangs, and the usual workarounds didn't work.
2020-09-17 18:27:43 -05:00
Scott Shawcroft 4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid
Automate USB VID/PID Uniqueness Check
2020-09-17 11:48:46 -07:00
Brian Dean 81ee874531 pins.c: fix trailing whitespace 2020-09-16 16:40:04 -04:00
Brian Dean 847d609ddc rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles appropriately 2020-09-16 16:27:24 -04:00
Jeff Epler 1fc797132a
Merge pull request #3237 from DavePutz/issue3216
Issue#3216 - Needed an alternate way to check if background tasks were run
2020-09-16 08:47:33 -05:00
Scott Shawcroft 95e27bb8bf
Add more PIDs for unique boards 2020-09-15 13:43:35 -07:00
Dan Halbert 3c6af94fb3
Merge pull request #3384 from jepler/feather_m4_can
atmel-samd: add same51, feather_m4_can
2020-09-14 23:57:51 -04:00
Jeff Epler 067a975875 update submodules to merge commits 2020-09-14 17:22:30 -05:00
DavePutz 2a2a8d6457
Merge pull request #28 from adafruit/main
Merge from adafruit/main
2020-09-14 16:50:40 -05:00
DavePutz 2eca4ee902
Update PulseIn.c 2020-09-14 11:04:45 -05:00
DavePutz c014ac3089
Reworked check for input taking too long 2020-09-14 10:54:57 -05:00
Jeff Epler af24c8ae06 Merge remote-tracking branch 'origin/main' into implicit-fallthrough-diagnostic
Conflict in locale/circuitpython.pot resolved with 'make translate'
2020-09-13 14:21:21 -05:00
Jeff Epler 73ad78ed1b
Merge pull request #3395 from microDev1/safeMode
Add esp32s2 safe mode support & fix user_safe_mode output
2020-09-13 14:18:59 -05:00
Jeff Epler 90f7340bfc move implicit-fallthrough warning enable to defns.mk 2020-09-13 13:13:09 -05:00
microDev 36da92075b Update safe mode reason 2020-09-13 22:57:24 +05:30
microDev 5deac8d249 Update board specific safe mode message 2020-09-13 18:22:40 +05:30
lady ada 2fac4851a5 fix typo, tested hardware, neopixel doesnt work tho 2020-09-12 19:56:13 -04:00
lady ada 6fff4ec00d cutie variant 2020-09-12 19:00:26 -04:00
Jeff Epler 01fdd9598a disable iimplicit-fallthrough warning inside asf4
.. there is an instance of it that looks like a "true positive", but it only
affects sdhc transfers that are not a multiple of 4 bytes, which I don't think
happens. (sd card blocks are always 512 bytes)  I can fix this in our
asf4 repo but that would mean this should be deferred until after #3384 is
merged, since that also touches asf4 very invasively by adding a whole new
chip family.
2020-09-12 17:48:42 -05:00
Jeff Epler 5729097bc4 atmel-samd: enable build error for implicit fallthrough
If any diagnostics occur, we will want to either add `/* FALLTHROUGH */`
or `break;` as appropriate.  I only tested a few builds (trinket m0
and metro m4 express)
2020-09-12 15:11:29 -05:00
Jeff Epler cacb0124ac feather_m4_express: Use quad data mode on flash
Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed.

Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.
2020-09-10 20:20:21 -05:00
Scott Shawcroft 9e722c8c99
Merge pull request #3375 from DavePutz/issue3296
Correction for Issue #3296 - ble hanging on nrf52840
2020-09-10 12:36:17 -07:00
Jerry Needell 2529ee2359 freeze rfm69 and bus_device libraries int feather_m0_rfm69 2020-09-09 14:54:20 -04:00