Commit Graph

12 Commits

Author SHA1 Message Date
Chris Mason 64181b5f76 stm32: Add support for STM32L452 MCUs. 2019-07-08 16:50:19 +10:00
Damien George 23d9c6a0fd stm32: Add initial support for STM32L0xx MCUs. 2019-07-05 17:24:59 +10:00
Damien George aa7b32c811 stm32/dac: Rework DAC driver to use direct register access.
This patch makes the DAC driver simpler and removes the need for the ST
HAL.  As part of it, new helper functions are added to the DMA driver,
which also use direct register access instead of the ST HAL.

Main changes to the DAC interface are:

- The DAC uPy object is no longer allocated dynamically on the heap,
  rather it's statically allocated and the same object is retrieved for
  subsequent uses of pyb.DAC(<id>).  This allows to access the DAC objects
  without resetting the DAC peripheral.  It also means that the DAC is only
  reset if explicitly passed initialisation parameters, like "bits" or
  "buffering".

- The DAC.noise() and DAC.triangle() methods now output a signal which is
  full scale (previously it was a fraction of the full output voltage).

- The DAC.write_timed() method is fixed so that it continues in the
  background when another peripheral (eg SPI) uses the DMA (previously the
  DAC would stop if another peripheral finished with the DMA and shut the
  DMA peripheral off completely).

Based on the above, the following backwards incompatibilities are
introduced:

- pyb.DAC(id) will now only reset the DAC the first time it is called,
  whereas previously each call to create a DAC object would reset the DAC.
  To get the old behaviour pass the bits parameter like: pyb.DAC(id, bits).

- DAC.noise() and DAC.triangle() are now full scale.  To get previous
  behaviour (to change the amplitude and offset) write to the DAC_CR (MAMP
  bits) and DAC_DHR12Rx registers manually.
2019-04-24 15:51:19 +10:00
Damien George 1bcf4afb10 stm32/systick: Make periodic systick callbacks use a cyclic func table.
Instead of checking each callback (currently storage and dma) explicitly
for each SysTick IRQ, use a simple circular function table indexed by the
lower bits of the millisecond tick counter.  This allows callbacks to be
easily enabled/disabled at runtime, and scales well to a large number of
callbacks.
2019-02-08 01:20:13 +11:00
Andrew Leech 84f4d58479 stm32/dcmi: Add F4/F7/H7 hal files and dma definitions for DCMI periph. 2018-09-21 12:12:49 +10:00
Damien George e4f7001d9c stm32/sdcard: Use only a single DMA stream for both SDIO TX/RX.
No need to be wasteful on DMA resources.
2018-09-11 17:21:22 +10:00
Damien George b0c8a94b41 stm32/dma: Pass DMA direction as parameter to dma_init not in cfg struct
Some DMA channels (eg for SDIO) can be used in both directions and this
patch allows such peripherals to dynamically select the DMA direction.
2018-09-11 17:18:06 +10:00
Damien George ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
iabdalkader 2ebc538d63 stm32/dma: Enable H7 DMA descriptors. 2018-03-20 23:24:45 +11:00
Damien George e37b8ba5a5 stm32: Use STM32xx macros instead of MCU_SERIES_xx to select MCU type.
The CMSIS files for the STM32 range provide macros to distinguish between
the different MCU series: STM32F4, STM32F7, STM32H7, STM32L4, etc.  Prefer
to use these instead of custom ones.
2018-03-17 10:42:50 +11:00
Damien George d966a33486 stm32: Change header include guards from STMHAL to STM32 to match dir. 2018-02-15 15:47:04 +11:00
Damien George 01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00