djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
19,942 Commits 21 Branches 274 Tags 785 MiB
d35a307ffa
Commit Graph

4807 Commits

Author SHA1 Message Date
Lucian Copeland
d35a307ffa Merge branch 'sleep-api-update' into stm-alarm 2021-03-29 12:27:25 -04:00
Lucian Copeland
00178ca5e0 Sleep API changes, redundancy fix 2021-03-27 14:14:57 -04:00
Lucian Copeland
529fb52309 Style changes and wakeup detection 2021-03-27 13:16:12 -04:00
Limor "Ladyada" Fried
9ac8ea587a
Merge pull request #4499 from dhalbert/rp2040-lengthen-sda-tx-hold-time 
Length RP2040 I2C SDA hold time
 2021-03-26 20:21:52 -04:00
Dan Halbert
03340a3fcd Incorporate https://github.com/adafruit/pico-sdk/pull/2 2021-03-26 18:55:45 -04:00
Jeff Epler
2bc61b4580 Parenthesize double-division for clarity 2021-03-26 11:01:22 -05:00
Jeff Epler
231cb1ffd9 mimxrt10xx: Use the proper "betweenTransferDelay" (et al) values 
Set the betweenTransferDelay to the SCK low-time, to avoid long pauses
between bytes (transfers) while preventing the last SCK cycle in a byte
from being a runt pulse.

Compared to an earlier revision of this change, which just set the delays
all to zero, this doesn't break using an AirLift, which was sensitive
to the runt pulses (the simple loopback-wire test didn't detect the problem)
 2021-03-26 10:54:13 -05:00
Jeff Epler
1d48054aea mimxrt10xx: Factor out "transfer_common" 
.. and set the "MasterPcsContinuous" flag, which removes some of the
gap between bytes of a single SPI transaction
 2021-03-26 10:04:35 -05:00
Jeff Epler
ffb70a8737 Freeze ESP32SPI into mimxrt1011_evk 
.. so that it is more conveniently like the metro m7 for my testing
 2021-03-26 10:01:53 -05:00
Jeff Epler
9e110f120a mimxrt10xx: busio: cap SPI baudrate at 30MHz per datasheet 2021-03-26 10:01:53 -05:00
Dan Halbert
155b61f027
Merge pull request #4378 from Gadgetoid/patch-remove-rp2040-i2c-bitbang 
RP2040: Remove short-write bitbang from I2C
 2021-03-25 21:01:02 -04:00
Scott Shawcroft
da4dceea15
Fix 16MB Winbond names 2021-03-25 11:37:08 -07:00
Scott Shawcroft
aec0ef3cbf
Switch devices.h to nvm.toml data 2021-03-25 09:57:18 -07:00
Scott Shawcroft
e9ceb9263e
Merge pull request #4474 from jepler/fix-spi-frequency 
mimxrt: SPI: Set the TCR value returned by MasterBaudSetRate
 2021-03-25 08:59:21 -07:00
Scott Shawcroft
f79d60b205
Use GCC @file to shorten linker command length 
This hopefully fixes linking on Windows with cmd.exe
 2021-03-24 15:03:33 -07:00
Jeff Epler
b440883fe5 mimxrt: SPI: Set the TCR value returned by MasterBaudSetRate 
without this, the baud rate could be wrong; in my testing, it was
low by a factor of 2 when requesating baudrate=1_000_000 (1MHz).

When passing the baudrate in to LPSPI_MasterInit, the setting is made
automatically, but LPSPI_MAster_SetBaudRate just returns it via the
out-parameter tcrPrescaleValue.
 2021-03-24 13:33:21 -05:00
Dan Halbert
c81007afb0
Merge pull request #4446 from tannewt/rp2040_flash 
Switch RP2040 flash settings to nvm.toml
 2021-03-23 15:18:29 -04:00
Lucian Copeland
278d53c512
Merge pull request #4465 from anecdata/udp_server 
swap recvfrom_into() port byte-order
 2021-03-23 13:48:39 -04:00
Scott Shawcroft
36edc4bb89
Improve Winbond naming and correct board settings 2021-03-23 09:06:48 -07:00
anecdata
c106b432c5 swap recvfrom_into() port byte-order 2021-03-22 20:03:26 -05:00
Scott Shawcroft
7867632a81
Merge remote-tracking branch 'adafruit/main' into rp2040_flash 2021-03-22 15:29:43 -07:00
Scott Shawcroft
f200e6a21e
Fix doc build and address feedback 2021-03-22 15:24:27 -07:00
lady ada
36ae69ab6f qtpy is more of a button than a switch! add itsybitsy rev C files 2021-03-21 18:44:32 -04:00
lady ada
ebd6011633 add USBBOOT switch, move RX pin, re-enable UART (tested) 2021-03-21 14:58:18 -04:00
Lucian Copeland
d8a2d69e10 Working deep sleep via RTC reset, with debug pins 2021-03-21 13:15:44 -04:00
Limor "Ladyada" Fried
4b42932188
Merge pull request #4449 from ladyada/main 
adventure together with rotary trinkey
 2021-03-20 13:37:31 -04:00
lady ada
8884682cac adventure together with rotary trinkey 2021-03-20 12:03:51 -04:00
Scott Shawcroft
4aea7f8f52
Add requirements-dev.txt for python deps 2021-03-19 15:22:23 -07:00
Jeff Epler
22906ac95e
Merge pull request #4442 from jepler/m7-reboot-bootloader 
mimxrt1011: Fix reset-to-bootloader
 2021-03-19 15:37:06 -05:00
Jeff Epler
3fcb6b278f
Merge pull request #4443 from jepler/evk-pins-dnp 
imxrt1010_evk: Delete pins that are not connected
 2021-03-19 15:36:36 -05:00
Limor "Ladyada" Fried
c0ec904c7a
Merge pull request #4441 from jepler/metro_m7_4mb 
metro m7: another place to fix flash capacity
 2021-03-19 12:42:35 -04:00
Jeff Epler
ee59c75f62 imxrt1010_evk: Delete pins that are not connected 
There are DNP resistors on the MIMXRT1010-EVK board (see SCH-45852)
that lead to these pins on the arduino-style header not being connected
through. In theory someone could populate them, but as it the presence
of these names in the pins module caused problems when they didn't work
as expected.

Closes #3012
 2021-03-19 11:29:32 -05:00
Jeff Epler
06743d91ed mimxrt1011: Fix reset-to-bootloader 
The definition of DBL_TAP_REG must match tinyuf2
 2021-03-19 10:11:45 -05:00
Dan Halbert
d7a2ae9df7 fix stm compiler error 2021-03-19 11:04:46 -04:00
Jeff Epler
01a1cdf13a update flash chip comment 2021-03-19 09:50:26 -05:00
Dan Halbert
1512ca520b Fix PWMOut non-error handling and never reset 2021-03-19 09:57:21 -04:00
Jeff Epler
6abea8a4aa another place to fix flash capacity 2021-03-19 08:41:28 -05:00
Dan Halbert
8293e1eedc fix display rotation and position 2021-03-19 00:09:48 -04:00
Dan Halbert
47437cb415 make translate; fix display pins 2021-03-18 23:42:24 -04:00
Dan Halbert
ea82ca1d02 correct PID 2021-03-18 23:24:20 -04:00
Dan Halbert
21c55f8e75 update funhouse pins for latest rev b 2021-03-18 23:14:59 -04:00
Dan Halbert
b2d913412f merge from upstream 2021-03-18 23:14:43 -04:00
Scott Shawcroft
5d2b60cbf6
Redo RP2040 flash settings 
This switches stage2 to C and uses Jinja to change the C code based
on flash settings from https://github.com/adafruit/nvm.toml. It
produces the fastest settings for the given set of external flashes.
Flash size is no longer hard coded so switching flashes with similar
capabilities but different sizes should *just work*.

This PR also places "ITCM" code in RAM to save the XIP cache for
code execution. Further optimization is possible. A blink code.py
still requires a number of flash fetches every blink.

Fixes #4041
 2021-03-18 16:55:42 -07:00
Jeff Epler
2589515342
Merge pull request #4435 from jepler/metro-m7 
Fixes for Metro M7
 2021-03-18 17:56:12 -05:00
Jeff Epler
0b22a9397a mimxrt: Quiet some warnings down in the sdk 
Closes #2487
 2021-03-18 16:54:11 -05:00
Jeff Epler
0ba0fae495 mimxrt: Enable USB Midi 
Closes #2473
 2021-03-18 16:54:11 -05:00
Jeff Epler
74243fd71a metro_m7: Update board name, flash chip size 2021-03-18 16:54:11 -05:00
Scott Shawcroft
11e510a06a
Merge pull request #4419 from spe2/main 
Add board definition for Sparkfun Pro Micro RP2040
 2021-03-17 18:17:24 -07:00
Jeff Epler
719e8710f2
Merge pull request #4411 from mintakka/thingplus-rp2040 
added board configuration for Sparkfun ThingPlus RP2040
 2021-03-17 16:23:55 -05:00
Phil Howard
b8d4f9655f RP2040: Only bitbang 0-byte writes 
The I2C.c for RP2040 included a special case for writes <=2 bytes to match the MicroPython implementation,
however RP2040 does support 1 and 2 byte reads, with only 0 bytes being the exception.

Signed-off-by: Philip Howard <phil@pimoroni.com>
 2021-03-17 16:25:54 +00:00