Commit Graph

16 Commits

Author SHA1 Message Date
Scott Shawcroft
931c7c1c51
Add Bangle.js 2, JDI memory displays and ACeP epd
This 2-in-1 PR started with the goal of support the Bangle.js 2
smartwatch with *no USB*.
* Adds "secure" DFU build support with a committed private key.
* Adds 3-bit color support with one dummy bit for the JDI memory display
* Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK.
  This is needed because the Bangle.js 2 uses the watchdog to reset.
* Renamed port_background_task() to port_background_tick() to indicate it
  runs on tick, not RUN_BACKGROUND_TASK.
* Marks serial connected when the display terminal is inited. This means
  that safe mode messages show up on the display.

ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that
support as well.
* Adds 3-bit ACeP color support for 7-color e-paper displays. (Not
  watch related but similar due to color depth.)
* Allows a refresh sequence instead of a single int command. The 7" ACeP
  display requires a data byte for refresh.
* Adds optional delay after resetting the display. The ACeP displays
  need this. (Probably to load LUTs from flash.)
* Adds a cleaning phase for ACeP displays before the real refresh.

For both:
* Add dither support to Palette.
* Palette no longer converts colors when set. Instead, it caches
  converted colors at each index.
* ColorConverter now caches the last converted color. It should make
  conversions faster for repeated colors (not dithering.)
2023-02-15 15:03:40 -08:00
Dan Kulinski
fbd9e3284b Add two byte length check 2022-01-14 15:25:40 -07:00
Amit Sides
98f026fbb4 Fixing comments for PR 2021-08-25 15:07:19 -07:00
Amit Sides
1b6283a5ae Adding quick refresh support 2021-08-21 23:51:24 +03:00
Scott Shawcroft
1a0b4193b7
Simplify the status LED to save power
This also removes the need to pin share because we don't use the
status LED while user code is running.

The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.

One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.

Fixes #4133
2021-05-13 14:41:20 -07:00
microDev
a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
Scott Shawcroft
8d4296f964
Add board.DISPLAY to MagTag. Fix luma computation
* Initialize the EPaper display on the MagTag at start.
* Tweak the display send to take a const buffer.
* Correct Luma math
  * Multiply the blue component, not add.
  * Add all of the components together before dividing. This
    reduces the impact of truncated division.
2020-11-13 18:57:52 -08:00
Scott Shawcroft
0d1649880f
Add grayscale EInk support 2020-10-26 16:59:59 -07:00
Scott Shawcroft
ed6e81d688
Switch SPI to polling DMA and enable displayio 2020-06-24 13:10:08 -07:00
Scott Shawcroft
bea77c651a
Minor renames 2019-08-26 16:37:59 -07:00
Scott Shawcroft
7324b70a7c
Rework based on Dan's review 2019-08-23 15:27:21 -07:00
Scott Shawcroft
f2a1972ba8
Add refresh_time to use if busy_pin is not given 2019-08-22 14:23:33 -07:00
Scott Shawcroft
24b30965c4
Refresh ePaper displays once code.py is done running 2019-08-22 14:23:32 -07:00
Scott Shawcroft
36a23e0fe3
Rework refresh API and factor common display stuff out
NOT TESTED! Just compiles

Fixes #1691
2019-08-22 14:23:27 -07:00
Scott Shawcroft
c247e7df9c
Begin refresh rework. 2019-08-22 14:08:33 -07:00
Scott Shawcroft
70680d5b22
EPaper displays work mostly. 2019-08-22 14:08:33 -07:00