89678f79a7
Convert to using issue forms
2021-06-29 21:32:32 -07:00
dc76306cfa
Enable a BLE workflow
...
nRF CircuitPython boards will now provide the file transfer
service defined here: https://github.com/adafruit/Adafruit_CircuitPython_BLE_File_Transfer
USB capable boards will only advertise if previously bonded to a
device or if the reset button is pressed during the fast blue
flashes on start up. When pressed, the board will restart again but
the blue period will not flash.
Boards without USB will always advertise.
When previously bonded, the advertisement is private so that no
other peers can connect. If advertising publicly, the tx power is
lowered to reduce the likelihood of bonding from a distance.
This PR also fixes issues with loading identities of bonded peers
so that our address can now be resolved and we can resolve others'
addresses when scanning.
2021-06-24 12:59:14 -07:00
6a48c69419
tighten conditions under which pypi upload is attempted
2021-06-24 11:08:34 -05:00
a8e599a3de
upload the 'sdist' file as an artifact / to s3, not the whole circuitpython-stubs folder
2021-06-22 15:01:19 -05:00
f51ca53553
refine stubs-building procedure
...
* so that excess files are not included in sdist, perform build down
in circuitpython-stubs
* This means we need to
* Remove the need-pypi check
* Copy a setup.py, README, and MANIFEST.in into the stubs build location
* Revamp how the overall `mypy --strict` check lists its inputs
* Add a new test that actually installing the stubs lets us do type
checking (tools/test-stubs.sh)
* Add a missing return type to a __init__ function (why was this not
an error under `mypy --strict`, I wonder)
2021-06-22 08:59:05 -05:00
c81f3fd789
Merge branch 'adafruit_main' into upload_stubs_action
...
# Conflicts:
# setup.py
2021-06-19 12:36:13 -05:00
1fe38138e8
use scm_version for stubs. seperate stubs upload from S3 mpy-cross upload steps in actions.
2021-06-19 12:33:34 -05:00
124c7b785a
Add kaluga version 1.3
...
.. this board is nearly the same as the "1.2" version originally
released, but makes a few changes to reduce pin conflicts between the 13-pin
camera header and the bootstrapping pins. "1.3" was introduced in summer
2020-- check the bottom of your board silk to find out whether you have a 1.2
or a 1.3, because it's not clear whether there is remaining 1.2 stock.
Another vexing fact about the 1.3 is that its LCD can have one of two
chipets, and the chipset used is not marked anywhere!
2021-06-08 13:28:48 -05:00
c4f685aab1
Merge pull request #4865 from ZodiusInfuser/pimoroni_boards
...
Added definition for upcoming Pimoroni RP2040 board
2021-06-07 11:13:01 -04:00
abfeb69454
remove hashes from version. upload to pypi in same step as S3
2021-06-06 10:14:02 -05:00
5a22a0f601
upload stubs step in actions
2021-06-05 12:07:12 -05:00
6011db3aec
Added board definition
2021-06-03 15:49:23 +01:00
db1830d62b
Add Sparkfun MicroMod SAMD51
2021-06-02 21:53:23 -04:00
892dfa84ed
Merge pull request #4826 from jepler/actions-windows-build
...
Check that select firmwares build on Windows with MSYS2
2021-06-01 13:04:06 -07:00
dea5c82d51
Merge pull request #4834 from reppad/muselab_nanoesp32_s2_wrover
...
Muselab nanoESP32-S2 w/WROVER
2021-06-01 12:46:47 -07:00
aade07492f
Merge pull request #4832 from jepler/mpy-cross-macos-arm64-universal
...
mpy-cross: Build an arm64 (M1) bin and a universal bin
2021-05-31 09:05:52 -04:00
ed977e9f25
mpy-cross: Build an arm64 (M1) bin and a universal bin
2021-05-30 13:03:12 -05:00
625fa881c6
Add Muselab Nanoesp32_s2 w/Wrover
2021-05-30 16:14:21 +02:00
49db85cb3d
Check that select firmwares build on Windows with MSYS2
...
This configuration is used by @ladyada and more often than it should
we've discovered late that a change introduced problems building
there.
By adding this to regular CI, hopefully we learn about and fix these
issues sooner rather than later.
2021-05-28 16:47:29 -05:00
5920ac647a
Modified the essential files for Maker Pi RP2040.
2021-05-28 22:42:54 +08:00
5eb4cc6489
Remove non-product Adafruit boards
2021-05-26 16:01:17 -04:00
9f4eb48e70
Updating MISO
...
While testing WIFI realized MISO was defined incorrectly
2021-05-22 01:02:06 -04:00
38ffc4352d
add workflow for makropad
2021-05-18 11:09:03 -04:00
47947dc23c
Merge pull request #4749 from tannewt/merge_1.15
...
Merge in MicroPython 1.15
2021-05-12 20:52:11 -05:00
966d25c6a5
Merge MicroPython v1.15 into CircuitPython
2021-05-12 17:51:42 -07:00
502b66eac0
moar trinkz
2021-05-11 22:03:05 -04:00
446169e078
Merge pull request #4720 from tannewt/merge_1.13
...
Merge in MicroPython 1.13
2021-05-08 08:46:03 -05:00
c6b9885573
Merge pull request #4721 from dhalbert/update-xtensa-cache-id
...
update github actions xtensa cache id; fix a typo
2021-05-06 16:48:20 -04:00
0773e355a7
update github actions xtensa cache id; fix a typo
2021-05-06 15:10:45 -04:00
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13
2021-05-06 11:17:53 -07:00
ebf9dcb47a
Merge pull request #4689 from dhalbert/dynamic-usb-descriptors
...
Dynamic USB descriptors
2021-05-06 13:51:38 -04:00
d8701e5136
Update binary path
2021-05-05 15:48:01 -07:00
b9f349779e
Build an aarch64 version of mpy-cross
2021-05-05 14:43:53 -05:00
c37f021791
regularize and shrink many builds
2021-05-05 12:35:41 -04:00
f0bb26d70f
Merge MicroPython 1.13 into CircuitPython
2021-05-04 18:06:33 -07:00
5679eb4fd7
Merge pull request #4677 from skerr92/add-cp-sapling-rev-b
...
Add cp sapling rev b
2021-04-29 19:22:49 -05:00
710397fd84
adding board to build.yml
2021-04-27 16:54:13 -06:00
454e78f41f
merge #4645 from 6.2.x to main
2021-04-23 13:33:58 -04:00
c931c84e49
new cache id to fix failing xtensa builds
2021-04-22 10:45:25 -04:00
83c768b25d
Merge pull request #4627 from aramcon-badge/aramcon2-badge
...
Add board definition files for ARAMCON2 Badge
2021-04-19 15:17:47 -04:00
f0b04d403d
Add board definition files for ARAMCON2 Badge
2021-04-19 20:41:01 +03:00
626f786e6b
Add the atmegazero_esp32s2 to the build.yml file.
2021-04-19 09:07:32 -04:00
b6fa90d0b5
Merge pull request #4625 from stonehippo/sparkfun_micromod_atp_rp2040
...
Added Sparkfun MicroMod RP2040
2021-04-18 21:14:47 -04:00
e0bb7385a1
Added Sparkfun MicroMod RP2040
...
Added board definition for the Sparkfun MicroMod RP2040.
Mostly followed the format for pins from the MicroMod nRF52840 board
definition, as MicroMod tries to standardize pins across
microcontrollers.
2021-04-17 10:56:04 -04:00
0189b80aa4
Merge pull request #4605 from tannewt/build_fail_matcher
...
Add build file matcher to pull out which board/language builds fail
2021-04-16 16:46:49 -04:00
f55d684057
Merge pull request #4612 from ZodiusInfuser/main
...
Added definitions for Pimoroni RP2040-based boards
2021-04-15 19:20:24 -04:00
0be5cbb5b6
Bump ESP-IDF cache key
...
Builds are failing with current cache
2021-04-15 10:21:26 -07:00
51570eb58b
Sorted board list
2021-04-15 12:06:58 +01:00
a9bbf7083e
tools/ci.sh: Build esp32 using IDF v4.0.2 and v4.3.
...
To test different IDF's, and also test building the GENERIC_S2 board.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
e4456bd756
Added definitions for PicoLipo boards
2021-04-14 23:09:10 +01:00
8bef15aa2d
Match build failures to better highlight them
2021-04-14 11:52:00 -07:00
42abb982fe
rename proxsense to proxlight
2021-04-11 18:39:14 -04:00
ff07b8f2d1
typo
2021-04-11 17:49:57 -04:00
9dc6d691b8
add prox trinkey and rename others to adafruit_
2021-04-11 17:45:37 -04:00
56be8306cd
try adding a submodule?
2021-04-10 23:22:13 -04:00
ebfe36c9aa
Merge pull request #4576 from felixerdy/main
...
Add senseBox MCU
2021-04-09 10:27:37 -07:00
8544249fc0
boards/bdmicro_vina_d51: Replace old rev with new rev and rename.
...
This update to the PR retains the earlier board rev (with a rename) so
that backward binary compatibility is not lost for the earlier board
revision. The primary name 'vina-d51' is retained for the latest
revision to make it easy for customers to select the proper UF2
download - because the name matches the commercial name.
Details:
Replace bdmicro_vina_d51 with bdmicro_vina_d51_pcb7 (revision 7 of
PCB) with boardfiles unmodified. Add _pcb7 to the workflow build.
Replace bdmicro_vina_d51 boardfile content with latest PCB updates
(revision 10 ov PCB). Add minimal comments in the board files to make
it clear which PCB revision is implemented. Update the USB PID to
reflect an updated board revision.
2021-04-07 09:11:30 -04:00
ae80378c4e
Merge pull request #4545 from ElectronicCats/huntercat_nfc
...
HunterCat NFC
2021-04-04 14:21:49 -04:00
27d8832868
Merge pull request #4512 from m-byte/main
...
Add Artisense RD00 board files
2021-04-03 18:40:59 -05:00
43ba81ffa1
Add Artisense RD00 board files
2021-04-03 17:20:59 +02:00
d4a45d401d
add hunter cat nfc buld.yml
2021-04-02 18:38:37 -06:00
1ae6f362e1
clone repo before installing deps
...
closes #4524
2021-04-01 10:53:06 -04:00
77889fe70c
clone repo before installing deps
...
closes #4524
2021-04-01 18:00:56 +05:30
1bb5bed80f
Remove sentence about a link that fixes a problem
...
Multiple times it has occurred that people left this line in a PR by mistake. it makes it look like they failed to include some useful information, but really is just a misunderstanding. Delete the text to reduce the chance of misunderstanding.
2021-03-29 21:31:00 -05:00
67c039db43
Checkout before installing deps
2021-03-22 16:15:55 -07:00
7867632a81
Merge remote-tracking branch 'adafruit/main' into rp2040_flash
2021-03-22 15:29:43 -07:00
10c9f61352
fix sort
2021-03-21 19:11:15 -04:00
36ae69ab6f
qtpy is more of a button than a switch! add itsybitsy rev C files
2021-03-21 18:44:32 -04:00
4b42932188
Merge pull request #4449 from ladyada/main
...
adventure together with rotary trinkey
2021-03-20 13:37:31 -04:00
8884682cac
adventure together with rotary trinkey
2021-03-20 12:03:51 -04:00
4aea7f8f52
Add requirements-dev.txt for python deps
2021-03-19 15:22:23 -07:00
b2d913412f
merge from upstream
2021-03-18 23:14:43 -04:00
11e510a06a
Merge pull request #4419 from spe2/main
...
Add board definition for Sparkfun Pro Micro RP2040
2021-03-17 18:17:24 -07:00
719e8710f2
Merge pull request #4411 from mintakka/thingplus-rp2040
...
added board configuration for Sparkfun ThingPlus RP2040
2021-03-17 16:23:55 -05:00
cae3397ea0
Update .github/workflows/build.yml
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-16 13:47:10 -04:00
ea578a10a6
Update build.yml
...
Add Pro Micro RP2040 to build.yml.
2021-03-15 21:19:51 -06:00
49baa94446
added sparkfun_thingplus_rp2040 to .github/workflows/boards.yml and renamed board folder to include chip
2021-03-15 23:00:24 -04:00
090b6ba42f
update pre-commit
...
- add formatting check
- add translations check
2021-03-15 19:26:29 +05:30
de93df6444
add senseBox MCU
2021-03-12 17:57:55 +01:00
6129b8e401
tests: Rename run-tests to run-tests.py for consistency.
...
Signed-off-by: Damien George <damien@micropython.org>
2021-03-12 19:56:09 +11:00
f0965b1ef7
Merge pull request #4350 from nitz/board-add-sparkfun-micromod-nrf52840
...
Add new nRF port for SF MicroMod nRF52840.
2021-03-10 18:13:11 -08:00
1aad93baa3
Fixing build.yml
2021-03-09 13:58:02 -03:00
7029783985
funhouse board
2021-03-08 21:24:28 -05:00
8dc6c5bf24
Merge branch 'main' into franzininhoWIFI_wrover
2021-03-08 20:58:22 -03:00
5d2631281a
Adding franzininho_wifi_wroom in build.yml
2021-03-08 09:46:28 -03:00
6052b4e06b
Fix build.yml
2021-03-08 09:31:10 -03:00
9b0b59d75f
updating build.yml with franzininho wifi wroom
2021-03-08 09:01:36 -03:00
8e8368d594
Add sparkfun_nrf52840_micromod to `build.yml`
2021-03-07 01:25:31 -05:00
e68ab5ae2a
Fix build.yml wifi Franzininho WIFI wrover Board
2021-03-06 18:33:24 -03:00
67e598a863
Fix build.yml wifi Franzininho WIFI wroom Board
2021-03-06 18:26:13 -03:00
48e727f7d6
adding port for Franzininho WIFI board ESP32S2 w/Wrover
2021-03-06 17:47:27 -03:00
6cf9c5158c
adding port for Franzininho WIFI board
2021-03-06 17:15:54 -03:00
f7e42bfebc
build.yml: Fix 'Print failure info' to not error
...
Print Failure Info is for printing differences detected by 'Test all'. When some other step fails, then "*.exp" doesn't match any files at all, and _this_ step fails too.
We will assume that Github Actions always runs with bash as the shell (as it does today). In this case, we can set the "nullglob" shell option, so that a non-existent glob expands to nothing, instead of to itself.
2021-03-05 12:50:15 -06:00
b1268107af
change esp build cache key (again)
2021-03-04 15:22:56 -05:00
7970c882a6
Merge pull request #4316 from microDev1/issue-template
...
Add issue templates
2021-03-04 10:16:09 -08:00
9aa11ec51e
Apply suggestions from code review
2021-03-04 02:38:46 +05:30
d6836047a8
force a new idf-cache id to fix build issues
2021-03-03 14:04:56 -05:00
eafcd7d364
add issue templates
2021-03-03 11:22:33 +05:30
e41137c745
Merge pull request #4244 from UnexpectedCircuitPython/main
...
Added Unexpected Maker TinyS2 board definition
2021-02-23 10:40:06 -08:00
78b2daa2a7
Added Unexpected Maker TinyS2 board definition
2021-02-23 17:55:17 +11:00
ajs256
Scott Shawcroft
Jeff Epler
Jeff Epler
foamyguy
Limor "Ladyada" Fried
ZodiusInfuser
George White
Scott Shawcroft
Dan Halbert
reppad
Kong Wai Weng
Dan Halbert
BlitzCityDIY
Jeff Epler
Mark
Seth Kerr
Benny Meisels
Eddie Espinal
Damien George
Brian Dean
Matthias Breithaupt
sabas1080
microDev
mintakka
spe2
felixerdy
FBSeletronica
nitz
Seon Rozenblum