20098dfdd8
cam: Improve memory allocation
...
* realloc the dma descriptors and buffers, so we can change the image size
* NULL out the camera pointer after deinit, so deinit is idempotent
2021-06-10 11:15:18 -05:00
43509495ea
cam: Always work in total pixels, not width x height
2021-06-10 11:15:18 -05:00
eaf2def340
esp32s2: fix build errors in cam.c
2021-06-10 11:15:18 -05:00
dc6472bb5b
esp32s2: Add "cam" files from esp-dev-kits@282a356
...
.. these files have been re-formatted by our code-formatting
scripts, so their content does NOT match upstream.
2021-06-10 11:15:18 -05:00
a0ec95f092
kaluga 1.2: add camera_data_tuple
2021-06-10 11:15:18 -05:00
80f909001d
esp32s2: Add support for `make monitor`
...
`idf.py monitor` connects to the debug UART and shows the messages. In
contrast to a traditional terminal program, it also has the limited
ability to transform hex addresses into file & line number information,
especially for debug builds.
This requires the elf file be copied to a specific place.
2021-06-10 11:15:18 -05:00
3e83834621
esp32s2: Add claim_pin_number
...
In ParallelImageCapture we need to grab a group of pins by number
2021-06-10 11:15:10 -05:00
3e463ed89e
fix #4810
2021-06-09 17:37:22 +02:00
124c7b785a
Add kaluga version 1.3
...
.. this board is nearly the same as the "1.2" version originally
released, but makes a few changes to reduce pin conflicts between the 13-pin
camera header and the bootstrapping pins. "1.3" was introduced in summer
2020-- check the bottom of your board silk to find out whether you have a 1.2
or a 1.3, because it's not clear whether there is remaining 1.2 stock.
Another vexing fact about the 1.3 is that its LCD can have one of two
chipets, and the chipset used is not marked anywhere!
2021-06-08 13:28:48 -05:00
6ee9acc900
Merge pull request #4755 from jepler/esp32s2-protomatter
...
Esp32s2 protomatter
2021-06-01 13:32:34 -07:00
61d25f197a
Add requested Espressif PID
2021-05-30 20:18:49 +02:00
625fa881c6
Add Muselab Nanoesp32_s2 w/Wrover
2021-05-30 16:14:21 +02:00
11288c1c28
esp32s2: Add rgbmatrix support
2021-05-26 11:21:59 -05:00
4de8fa09ab
esp32s2: peripherals: store address of timer peripheral in its struct
...
.. this is helpful if we need to go down to the esp-idf low level
I/O routines
2021-05-26 11:18:02 -05:00
60c9a57815
esp32s2: Add pin_number, reset_pin_number needed by rgbmatrix
2021-05-26 11:18:02 -05:00
6750d3feab
esp32s2: Introduce, use NO_PIN
...
GPIO_NUM_NC is -1 so it's equivalent to the existing code.
2021-05-26 11:18:02 -05:00
d79d68705b
Merge pull request #4763 from jepler/esp32s2-build-memory-info
...
Add build_memory_info for esp32s2
2021-05-25 13:41:35 -04:00
f21eec5fe1
Work for non-psram builds
...
This is more or less a complete re-organization of the code.
* Use the actual byte size of the .bin file as the flash size,
as the algorithm for packing sections into the flash is complicated
* Match each section to a data region & find the high water mark in the
region
* Report on all the RAM regions, separately
Note that elftools is a requirement of esp-idf and so does not need to
be listed in our requirements.txt.
2021-05-25 10:06:31 -05:00
b14d573655
reduce SPI display baudrate from 60 MHz to 5 MHz to reduce display glitch
2021-05-20 21:23:59 -05:00
561ffec693
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 13:46:42 -07:00
5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 08:35:15 -07:00
499a4388cf
Handle inverted neopixel power
2021-05-19 17:29:02 -07:00
642fbcf87a
Handle status led power
...
This no longer turns on status LED power before running user code.
Therefore, use of the status LED on some boards will also have to
enable the power.
2021-05-19 10:57:14 -07:00
633d83cc3e
Merge remote-tracking branch 'upstream/main' into sleep-revamp
2021-05-17 18:57:10 -04:00
689ec86225
Merge pull request #4754 from dhalbert/fix-endpoint-checking
...
Fix endpoint checking; Clean up safe mode printing
2021-05-14 11:25:01 -07:00
c931e5deb7
Add build_memory_info for esp32s2
...
This detects an overflowed flash partition, such as
```
1452105 bytes used, -10313 bytes free in flash firmware space out of 1441792 bytes (1408.0kB).
444428 bytes used, 1652724 bytes free in ram for stack and heap out of 2097152 bytes (2048.0kB).
```
on a metro esp32-s2 built with debugging.
2021-05-14 10:39:07 -05:00
fa6c06fb38
count in/out endpoints; allow more usb modules on low-endpoint boards
2021-05-13 21:59:02 -04:00
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
295103bb31
Merge remote-tracking branch 'upstream/main' into sleep-revamp
2021-05-13 16:22:12 -04:00
35ee4add63
Merge pull request #4388 from hierophect/stm-alarm
...
STM32: Alarms and sleep
2021-05-13 10:27:51 -07:00
525b34b042
Fix formatting and broken links
...
Implmements missed pre-commit changes for all files, and fixes links broken by
cleanup in #4698
2021-05-10 18:04:43 -04:00
0d3c5222d8
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-05-10 17:30:33 -04:00
294ef59f27
Add LED pin to Adafruit boards.
2021-05-10 16:39:01 -04:00
dcfb7949d7
fix FunHome to FunHouse
...
FunHouse, sweet FunHouse.
2021-05-10 05:34:03 +02:00
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13
2021-05-06 11:17:53 -07:00
ebf9dcb47a
Merge pull request #4689 from dhalbert/dynamic-usb-descriptors
...
Dynamic USB descriptors
2021-05-06 13:51:38 -04:00
59c2787702
Fix esp32s2 build
2021-05-05 18:27:21 -07:00
30c7aa8fc9
Merge pull request #4650 from anecdata/ap
...
wifi.radio Access Point modes
2021-05-05 08:47:55 -07:00
f0bb26d70f
Merge MicroPython 1.13 into CircuitPython
2021-05-04 18:06:33 -07:00
d2b558993e
merge from main, including MicroPython 1.12 merge
2021-05-03 20:56:04 -04:00
d1db782760
Move validation code to the right spot.
...
As MicroDev1 pointed out the problem is a divide by zero when calculating the duty cycle.
Maybe need to check again in `common_hal_pwmio_pwmout_set_frequency()`.
2021-05-03 09:16:46 -06:00
8613b9a9fe
Trim Trailing Whitespace
...
was causing pre-commit checks to fail
2021-05-03 07:41:52 -06:00
2db113f191
esp32-s2: Don't set PWMOut frequency to 0
...
FeatherS2 crashes if you set the PWMOut frequency to 0.
This change will raise `ValueError: Invalid PWM frequency` if the requested frequency is 0.
(Lifted from the atmel-samd port)
2021-05-03 07:15:39 -06:00
ebedeeb51d
Merge pull request #4695 from dhalbert/magtag-spi-naming
...
MagTag: Remove board.SPI(); rename display-only pins
2021-05-01 09:44:42 -04:00
670c49ed94
MagTag: Remove board.SPI(); rename display-only pins
2021-04-30 22:58:51 -04:00
eebcd2eeaf
remove unsupported authmodes
2021-04-30 22:11:32 +05:30
6640db9555
make authmode settable
2021-04-30 21:35:02 +05:30
e95e921ca1
codeformat: Fix filename matching
...
In #4683 , tannewt noticed that uncrustify was not running on some
file in common-hal.
I investigated and found that it was not being run on a bunch of paths.
Rather than make incremental changes, I rewrote list_files to work
bsaed on regular expressions; these regular expressions are created from
the same git-style glob patterns.
I spot-checked some specific filenames after this change, and all looks good:
```
$ python3 tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup extmod/virtpin.c ports/raspberrypi/background.h ports/raspberrypi/common-hal/pulseio/PulseIn.c
black --fast --line-length=99 -v tests/thread/thread_exit1.py
```
recursiveloop and int_small are excluded, while PulseIn, virtpin,
and background are included.
Testing running from a subdirectory (not _specifically_ supported though):
```
(cd ports && python3 ../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c)
../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup ../extmod/virtpin.c raspberrypi/common-hal/pulseio/PulseIn.
```
As a side-effect, a bunch more files are re-formatted now. :-P
2021-04-30 10:48:08 -05:00
7c845818b3
Merge branch 'main' into ap
2021-04-30 17:11:22 +05:30
1b972c51c3
add authmode class
2021-04-29 18:42:36 +05:30
f06d54524d
merge from adafruit
2021-04-28 23:48:26 -04:00
9feef41c82
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-04-28 15:10:55 -04:00
17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2
...
Merge MicroPython v1.11 into CircuitPython
2021-04-27 11:02:02 -07:00
d7faac11b8
Release display on FunHouse for DeepSleep
2021-04-27 09:09:23 -07:00
76033d5115
Merge MicroPython v1.11 into CircuitPython
2021-04-26 15:47:41 -07:00
a1e2afadce
AP ip_info, gateway, & subnet
2021-04-26 00:22:51 -05:00
f20a53177b
add authmode to start_ap()
2021-04-25 18:20:18 -05:00
747d72f5a5
redundant with system log
2021-04-25 18:18:45 -05:00
c510c4d501
allow start/stop sta/ap (changing modes) when `wifi.radio.enabled = False`
2021-04-25 09:29:15 -05:00
9d1fcc3b14
merge from main
2021-04-25 10:27:52 -04:00
dc3c47d396
ap channel param
2021-04-25 00:22:08 -05:00
354b442867
fixes
2021-04-24 19:36:11 -05:00
2e52c0ae62
set all wifi modes; add sta start & sta/ap stop
2021-04-24 16:41:41 -05:00
2ba2574ebf
Merge pull request #4619 from tyomitch/microbit
...
[build] Allow USB to be set to 0
2021-04-24 10:31:29 -04:00
4d267ef644
add get_ipv4_address_ap
2021-04-23 21:44:34 -05:00
454e78f41f
merge #4645 from 6.2.x to main
2021-04-23 13:33:58 -04:00
4e3c1d4a4c
[build] Allow USB to be set to 0
...
Unify USB-related makefile var and C def as CIRCUITPY_USB.
Always define it as 0 or 1, same as all other settings.
USB_AVAILABLE was conditionally defined in supervisor.mk,
but never actually used to #ifdef USB-related code.
Loosely related to #4546
2021-04-23 11:13:34 -04:00
3d60ed1322
loc & common_hal start_ap(), + AP MAC getter
2021-04-22 22:55:32 -05:00
7e95dc1261
ap additions to radio object
2021-04-22 22:23:33 -05:00
bfc5eb1660
event_handler, init, and reset
2021-04-22 22:21:50 -05:00
f1b5249d3c
Fix esp32s2 uart.write() return value
2021-04-22 09:47:54 -04:00
64e0958916
wip: descriptor building
2021-04-21 23:25:36 -04:00
0e8b99dc65
Removes the USB_DEVICES entry as it's causing the build to fail.
2021-04-19 10:24:44 -04:00
fce6226ca5
Add board definition for the ATMegaZero ESP32-S2
2021-04-19 08:47:29 -04:00
e0024c70de
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-04-15 16:32:30 -04:00
7eeea869ac
Fix light sleep global alarms, API revisions
2021-04-15 15:02:42 -04:00
82479b6a2c
Merge pull request #4503 from hierophect/sleep-api-update
...
Sleep API changes and fix for main.c silent issue
2021-04-06 16:53:25 -04:00
27d8832868
Merge pull request #4512 from m-byte/main
...
Add Artisense RD00 board files
2021-04-03 18:40:59 -05:00
43ba81ffa1
Add Artisense RD00 board files
2021-04-03 17:20:59 +02:00
17585e1e07
Clean up API
2021-04-02 14:08:48 -04:00
91e530d36c
Resolve wake alarm crash
2021-04-02 13:42:22 -04:00
da16e4dce1
Merge pull request #4534 from UnexpectedCircuitPython/main
...
Changed some pins for TinyS2
2021-04-01 21:05:46 -04:00
a9b4e04643
Changed some pins for TinyS2
2021-04-02 08:08:02 +11:00
33418ce826
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-03-29 13:39:14 -04:00
d35a307ffa
Merge branch 'sleep-api-update' into stm-alarm
2021-03-29 12:27:25 -04:00
00178ca5e0
Sleep API changes, redundancy fix
2021-03-27 14:14:57 -04:00
529fb52309
Style changes and wakeup detection
2021-03-27 13:16:12 -04:00
c106b432c5
swap recvfrom_into() port byte-order
2021-03-22 20:03:26 -05:00
1512ca520b
Fix PWMOut non-error handling and never reset
2021-03-19 09:57:21 -04:00
8293e1eedc
fix display rotation and position
2021-03-19 00:09:48 -04:00
47437cb415
make translate; fix display pins
2021-03-18 23:42:24 -04:00
ea82ca1d02
correct PID
2021-03-18 23:24:20 -04:00
21c55f8e75
update funhouse pins for latest rev b
2021-03-18 23:14:59 -04:00
b2d913412f
merge from upstream
2021-03-18 23:14:43 -04:00
0890b54cd9
More formatting
2021-03-16 08:29:04 -05:00
fb437d8280
Formatting fixes
2021-03-16 08:22:02 -05:00
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
0ce5b2f594
put back pullup setting
2021-03-12 08:20:09 -05:00
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
c71b6cb699
move to esp-idf PR merge
2021-03-11 20:05:31 -05:00
6b2c9985ff
Extract RTC, implement fake RTC deepsleep
2021-03-11 17:50:05 -05:00
f75a009ed4
fix unnecessary statement order change
2021-03-11 15:16:32 -05:00
de88fa37fb
Merge remote-tracking branch 'adafruit/main' into esp32s2-i2c-bug
2021-03-11 12:27:29 -05:00
061d5910cb
use fixed esp-idf
2021-03-11 12:09:01 -05:00
08c5dbb003
use return values in STM PWMOut constructor, not exceptions
2021-03-11 08:52:47 -05:00
7029783985
funhouse board
2021-03-08 21:24:28 -05:00
27703f3156
fix quote error
2021-03-08 10:32:37 -03:00
fe29780afb
updating USB_VID and USB_PID for Espressif modules
2021-03-08 08:51:48 -03:00
2771e7fe75
Updating USB vendor ID and producfor Espressif modules
2021-03-08 08:47:33 -03:00
26eb429cc6
restore install/delete for i2c driver
2021-03-07 18:23:14 -05:00
4a50f1dd6f
Update Vendor ID for Espressif
2021-03-06 18:36:53 -03:00
48e727f7d6
adding port for Franzininho WIFI board ESP32S2 w/Wrover
2021-03-06 17:47:27 -03:00
6cf9c5158c
adding port for Franzininho WIFI board
2021-03-06 17:15:54 -03:00
13453d35c6
fix watchdog deinit
2021-03-04 13:23:34 +05:30
f1792c8474
Extract EXTI, create base sleep framework
2021-03-02 11:41:53 -05:00
69b10d7925
Added DAC1 & DAC2 pin names for FeatherS2
...
Expanded pin names for TinyS2 and added some new ones for functionality I forgot to add pin names for
Cleaned up mpconfigboard
2021-02-25 17:32:34 +11:00
78b2daa2a7
Added Unexpected Maker TinyS2 board definition
2021-02-23 17:55:17 +11:00
93d788543c
Merge remote-tracking branch 'adafruit/main' into secondary-cdc
2021-02-15 20:03:53 -05:00
6d5ffc677b
is_free should not check never_reset
2021-02-15 10:29:05 -05:00
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
5ba28e9861
Merge pull request #4159 from dhalbert/disable-brownout-before-deep-sleep-4025
...
turn off brownout before deep sleep
2021-02-09 09:03:33 -05:00
6efd87b3c6
Merge pull request #4124 from m4tk/main
...
Add display init code for Lilygo TTGO T8 ESP32-S2
2021-02-08 16:35:27 -08:00
f171660870
Merge pull request #4139 from hierophect/socket-accept-conn
...
Socket: Connect accepted sockets
2021-02-08 16:25:31 -05:00
be500fd15c
Merge pull request #4136 from hierophect/socket-portmax
...
Socket: fix inconsistencies in argument types
2021-02-08 16:23:20 -05:00
c3a1bd8f13
turn off brownout before deep sleep
2021-02-08 12:40:20 -05:00
1043d619fd
Merge pull request #4148 from Neradoc/fix-recv_into
...
Fix socket.recv_into receiving one less byte than expected
2021-02-08 11:29:41 -05:00
6be2466d6f
ESP32S2: Socket.recv_into only took len-1 bytes
2021-02-07 08:57:19 +01:00
582bc59d39
Connect accepted sockets
2021-02-05 17:32:15 -05:00
a310d4336b
Merge pull request #4128 from hierophect/esp32s2-i2s-claimpin
...
ESP32S2: Add I2S pin claiming
2021-02-05 11:47:49 -08:00
8214d67e5f
Fix LWIP connect error report
2021-02-05 13:14:49 -05:00
4d26ffb447
Make timeout core types consistent
2021-02-05 12:32:41 -05:00
54bd79a51a
LCD_MISO is not connected on board
2021-02-05 07:52:01 +01:00
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
210d0f8798
Add I2S pin claiming
2021-02-04 16:30:05 -05:00
ff7b296b04
Add display init code for Lilygo TTGO T8 ESP32-S2
2021-02-04 16:46:15 +01:00
215a56c920
Merge branch 'main' into webusb (trying to get CI back online)
2021-02-03 16:48:28 -06:00
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
e79283932d
Moving control of USB compile-time options down to the BOARD level
2021-02-01 19:08:56 -06:00
e1618c21b2
Default WebUSB to OFF because other ports are not ready for it yet
2021-02-01 17:56:38 -06:00
66639b237f
Merge remote-tracking branch 'upstream/main' into sslsocket
2021-02-01 11:43:01 -05:00
8277ffca86
Fix hash, close, error bugs
2021-02-01 11:04:12 -05:00
529114c162
Merge pull request #4077 from netroy/lilygo-ttgo-t8-esp32-s2
...
Add support for Lilygo TTGO T8 ESP32-S2
2021-01-31 19:50:36 -08:00
6dba7a146d
Add support for Lilygo TTGO T8 ESP32-S2
2021-01-31 14:30:31 +01:00
ddd516a683
Fix default timeout
2021-01-30 15:44:44 -05:00
a724f6f954
Fix documentation builds
2021-01-29 11:58:02 -05:00
63f9b12fe6
Partially hard-coded VENDOR descriptor has been added. First build to be accessed via WebUSB. NOTE - had to disable HID (EndPoint shortage?)
2021-01-28 20:22:31 -06:00
351a0e747d
Merge pull request #4047 from kmatch98/esp32s2_ParallelBus
...
Add initial ParallelBus support for ESP32-S2
2021-01-26 13:07:58 -08:00
815ab5277b
Fix stubs error, out of sockets error, invalid TLS leak
2021-01-26 14:13:12 -05:00
fbfb7b68cc
Most of the code we need has been pulled in from the tinyusb webusb_serial demo. Still LOTS to do regarding descriptors.
2021-01-25 20:37:58 -06:00
Jeff Epler
Aditya
Scott Shawcroft
reppad
Dan Halbert
Kevin Matocha
Scott Shawcroft
Lucian Copeland
Dan Halbert
Kattni Rembor
Neradoc
Randall Bohn
microDev
Melissa LeBlanc-Williams
anecdata
Artyom Skrobov
Eddie Espinal
Jeff Epler
Matthias Breithaupt
Seon Rozenblum
gamblor21
Mark
FBSeletronica
Neradoc
m4tk
Kevin Banks
BiffoBear