foamyguy
cbff9dd8e3
add new argument for all boards with built-in display
2022-06-04 11:08:20 -05:00
Dan Halbert
f63b26c534
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
Dan Halbert
a01dec1df9
message consolidation and more use of validators
2022-05-19 15:38:37 -04:00
Dan Halbert
28b14e05e3
shrink thunderpack_v12
2022-05-13 15:45:12 -04:00
Michael Wisslead
e63a327107
Bound PulseIn start indexes to maxlen.
2022-04-28 02:28:34 +00:00
Dan Halbert
4eeaf41edc
test and adjust NeoPixel timings on multiple products
2022-04-25 23:12:24 -04:00
Dan Halbert
3885bc9018
Merge pull request #6303 from DavePutz/issue_4452
...
Fix for issue #4452 - time.sleep on STM
2022-04-22 13:34:31 -04:00
root
289aaae954
Fix for issue #4452 - time.sleep on STM
2022-04-21 17:05:44 -05:00
Mark
8ed7b114cd
Merge branch 'main' into uzlib-module
2022-04-03 11:48:37 -05:00
gamblor21
7b586e077c
Removed from small boards
2022-04-02 12:22:14 -05:00
Scott Shawcroft
ee4c501936
Merge remote-tracking branch 'adafruit/main' into c3_serial_jtag
2022-03-23 12:17:02 -07:00
Scott Shawcroft
2fa182147b
Fix STM non-F4 builds
2022-03-22 23:07:38 -07:00
Scott Shawcroft
f5d90fc84f
Switch to port_serial_* hooks
...
This makes it easier to integrate port specific serial alongside
the common approaches.
2022-03-22 19:40:33 -07:00
Scott Shawcroft
4363361c87
Board definition clean up
...
Removes:
* AUTORESET_DELAY_MS which never did anything but was introduced
somehow.
* CIRCUITPY_BOOT_BUTTON in all but one ESP board because they all have
them. There is a default based on the strapping pins.
* BOARD_USER_SAFE_MODE_ACTION because it was all the same for boards
with boot buttons. Now the safe mode code manages the message.
2022-03-21 17:58:43 -07:00
Scott Shawcroft
dcc3ec171e
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-15 13:56:11 -07:00
Scott Shawcroft
32ac396a41
Further refine autoreload
...
This unifies the delay into the post-run delay that also waits
for user input and fake sleep. This ensures we always delay.
Previous code would only delay if the code.py was running when
autoreload was triggered. Now it will always delay.
We also now suspend autoreload when a USB write starts and then
resume on completion. This should prevent reloading in between
sectors of a single write.
2022-03-14 16:49:30 -07:00
Dan Halbert
6465d81918
Update ports/stm/boards/stm32f411ce_blackpill_with_flash/mpconfigboard.h
...
whoopsies
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-03-09 13:33:54 -05:00
Dan Halbert
9b2e22a6df
Make autoreload checking more robust
...
- Add reset for autoreload. De-request ticks.
- Separate state a little more in autoreload.c
- Rename some routines.
- Remove redundant settings of CIRCUITPY_AUTORELOAD_DELAY_MS.
2022-03-09 11:07:55 -05:00
Scott Shawcroft
83593a1558
Start of USB host API
...
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)
Related to #5986
2022-03-07 18:07:25 -08:00
Michael Himing
661140ebcc
Add missing BOARD_DICT_STANDARD_ITEMS to two boards
2022-03-03 09:03:34 +11:00
Scott Gauche
46129e327d
add stm32f412cx micro to cpy
2022-02-26 16:53:30 -05:00
gamblor21
edee8e3409
disable on some boards
2022-02-21 00:47:05 -06:00
Scott Gauche
6827586d33
add setting SPI CLK pin pull up/down based on SPI polarity config
2022-02-19 08:46:02 -05:00
EmergReanimator
4e0bd4a27f
Fixed pre-commit script issues.
2022-02-13 08:46:24 +01:00
EmergReanimator
69aa0b4edb
Fixed lost UART data.
...
Use non-blocking HAL call to allow reception of data over UART while
transmission is active.
2022-02-12 18:51:21 +01:00
Scott Gauche
a8d8651873
Canonical C style for half_duplex = true/false
2022-02-08 23:13:22 -05:00
Scott Gauche
3b418dbddc
change half_duplex to be on spi construct
2022-02-08 21:37:38 -05:00
Scott Gauche
4110b44b8a
add support for half-duplex SPI on STM parts
2022-02-07 21:08:44 -05:00
Scott Gauche
70ba229d23
add adafruit/stm32f4xx_hal_driver submodule
2022-02-03 14:01:11 -05:00
Scott Gauche
3d1b2b6ad6
remove ST's stm32f4xx_hal_driver submodule due to bug in qspi driver
2022-02-03 13:59:20 -05:00
Scott Gauche
92c9be9a4f
change st_driver to use ST's github drivers as submodules
2022-02-02 21:30:23 -05:00
Scott Gauche
4e305aa39c
Removed submodule st_driver
2022-02-02 19:51:23 -05:00
Dan Halbert
a04cd6444b
Merge pull request #5966 from Neradoc/add-alias-stemma-i2c
...
Add alias board.STEMMA_I2C for all boards with qwiic/stemma/QT
2022-02-02 11:08:13 -05:00
Neradoc
b2c8fd3938
add board.STEMMA_I2C alias to some boards
2022-02-02 01:18:46 +01:00
Dan Halbert
cc410ad6a3
common-hal I2C combined write_read
2022-01-31 22:03:30 -05:00
EmergReanimator
66cf66f118
Fixed common_hal_busio_uart_deinited incorrect pin assignment check.
...
The pin must be tested instead of pin->number in the same way as in STM
I2C busio layer.
2022-01-26 17:46:42 +01:00
Jeff Epler
1d13c4ccd1
Centralize LONGINT_IMPL handling
...
This closes #5782
2021-12-27 10:21:47 -06:00
Scott Shawcroft
7fea970379
Merge pull request #5597 from NathanY3G/add-board-sparkfun-thing-plus-stm32
...
Add board definition for SparkFun Thing Plus - STM32
2021-12-13 14:58:04 -08:00
Nathan Young
ffd41cf2b7
Updated USB product name to remove duplication
...
Output from lsusb now reads: SparkFun Electronics Thing Plus - STM32
2021-12-13 18:01:07 +01:00
Nathan Young
463d94475b
Use correct PID for SparkFun Thing Plus - STM32
...
This value was kindly provided by brhoff720.
2021-12-13 17:37:02 +01:00
Dan Halbert
7bcfbe30bf
shrink some boards
2021-12-08 11:57:15 -05:00
Dan Halbert
57c33059f3
board_deinit() everywhere
2021-11-30 11:00:10 -05:00
Timon
a1052d5f73
Initial broadcom port for Raspberry Pi
...
This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4
and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes
outside of the ports directory for it.
There are a couple other cleanups that were incidental:
* Use const mcu_pin_obj_t instead of omitting the const. The structs
themselves are const because they are in ROM.
* Use PTR <-> OBJ conversions in more places. They were found when
mp_obj_t was set to an integer type rather than pointer.
* Optimize submodule checkout because the Pi submodules are heavy
and unnecessary for the vast majority of builds.
Fixes #4314
2021-11-22 14:54:44 -08:00
Nathan Young
7afb4f1129
Temporary: Use same USB PID as the MicroMod STM32
2021-11-20 13:10:41 +01:00
Nathan Young
0ff3c0dac0
Board definition for SparkFun Thing Plus - STM32
2021-11-17 19:18:28 +01:00
Dan Halbert
e7d9dc323b
shrink kicksat-sprite, simmel, pyb_nano_v2
2021-11-10 21:12:41 -05:00
Jeff Epler
20cbd5e635
Disable bitmapio on some boards where it no longer fits
2021-11-08 18:58:33 -06:00
Scott Shawcroft
bb71f8c9b3
Merge pull request #5544 from jepler/alphablend
...
bitmaptools: add alphablend
2021-11-08 10:50:03 -08:00
EmergReanimator
94866fc1e3
Merge branch 'adafruit:main' into stm
2021-11-07 14:19:54 +01:00
EmergReanimator
a0074c36d8
Improved accuracy of common_hal_mcu_delay_us of STM port.
...
SysTick Current Value Register must be cleared before enabling.
2021-11-07 14:19:01 +01:00
