ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
d7305182f0
Remove adafruit_bus_device.SPIDevice.spi
2021-02-11 10:33:57 -05:00
ba2b65586f
sdcardio: add a note about sharing the SPI bus with SD cards and other devices
...
Similar to https://github.com/adafruit/Adafruit_CircuitPython_SD/pull/44
2021-02-09 10:07:21 -06:00
3a68ac8abb
Merge pull request #3536 from pewpew-game/pew-get-ticks
...
Fix #3504 : Don't use time module in pew.tick()
2021-02-08 17:50:44 -05:00
be500fd15c
Merge pull request #4136 from hierophect/socket-portmax
...
Socket: fix inconsistencies in argument types
2021-02-08 16:23:20 -05:00
f66caa29b9
Merge pull request #4146 from gamblor21/busdevice_write_read_fix
...
Fix write_then_readinto in adafruit_bus_device I2CDevice
2021-02-08 11:33:06 -05:00
1b7f3d11e7
wip
2021-02-08 10:57:41 -05:00
ea4a12005a
Fix write_then_readinto
2021-02-06 10:33:38 -06:00
4d26ffb447
Make timeout core types consistent
2021-02-05 12:32:41 -05:00
9140bfb5b2
Merge pull request #4049 from hierophect/sslsocket
...
Separate SSLSocket from Socket
2021-02-02 10:35:07 -08:00
a861498404
Merge pull request #4114 from tannewt/spidevice_spi
...
Add .spi accessor to SPIDevice
2021-02-02 09:53:10 -08:00
8fd6bff727
Add .spi accessor to SPIDevice
...
Fixes #4108
2021-02-01 20:03:23 -08:00
8789a2c8a9
Merge pull request #4110 from microDev1/rtc-rp
...
RP2040: Support for RTC
2021-02-01 19:47:44 -08:00
db7a962802
Merge pull request #4112 from gamblor21/longint_busdevice_fix
...
Fixed for boards without longint
2021-02-01 19:24:57 -08:00
0cf2df48c4
Fixed for boards without longint
2021-02-01 17:58:34 -06:00
ec03267035
rtc implementation for rp2040
2021-02-02 00:00:00 +05:30
459f323247
Merge pull request #4087 from DavePutz/cpu_temp_doc
...
Fixing microcontroller.cpu on multi-core cpus and adding microcontroller.cpus
2021-02-01 12:50:37 -05:00
66639b237f
Merge remote-tracking branch 'upstream/main' into sslsocket
2021-02-01 11:43:01 -05:00
8277ffca86
Fix hash, close, error bugs
2021-02-01 11:04:12 -05:00
e1838ff335
Fix typo in documentation.
2021-01-29 11:57:36 -06:00
a724f6f954
Fix documentation builds
2021-01-29 11:58:02 -05:00
cfd6ffc649
Adding files for cpu temperature fix
2021-01-28 16:06:30 -06:00
0098909757
RGBMatrix: change default to serpentine=True
...
The "serpentine" display order leads to much better wiring (shorter
ribbon cables) and is preferred. Change the default accordingly.
2021-01-28 11:42:19 -06:00
45b3c9ae42
Merge pull request #4068 from jepler/update-protomatter-tiling
...
protomatter: Update to version that supports tiling
2021-01-26 17:31:26 -08:00
189ec2fc60
Disallow tile=0
2021-01-26 16:51:31 -06:00
20c9f25a65
rgbmatrix: Eliminate some duplicated height-calculating code
...
This was hard to write, so let's have it written in 2 places instead
of 4.
2021-01-26 14:35:26 -06:00
368977fb90
RGBMatrix: Additional tile tweaks
...
* Introduce explicit serpentine: bool argument instead of using negative
numbers (thanks, ghost of @tannewt sitting on one shoulder)
* Fix several calculations of height
Testing performed (matrixportal):
* set up a serpentine 64x64 virtual display with 2 64x32 tiles
* tried all 4 rotations
* looked at output of REPL
2021-01-26 14:33:48 -06:00
815ab5277b
Fix stubs error, out of sockets error, invalid TLS leak
2021-01-26 14:13:12 -05:00
13812a788f
Merge pull request #4060 from dhalbert/regularize-extmod-modules
...
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-26 12:54:21 -05:00
ccdc97d23e
Update documentation for microprossors with multiple cpus
2021-01-26 09:47:21 -06:00
51f0544405
protmatter: Update to version that supports tiling
2021-01-26 09:19:44 -06:00
4241fd4b18
Merge pull request #4051 from jamesbowman/main
...
EVE: change fixed-point integer arguments to floating point
2021-01-25 14:44:48 -08:00
a2ac2da7cc
Merge pull request #3936 from gamblor21/busdevice_fixes
...
Changing adafruit_bus_device to duck typing
2021-01-25 14:41:53 -08:00
9f34ec78c4
Separate Socket and SSLSocket, add LWIP connect
2021-01-25 17:07:25 -05:00
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
dff3423c23
Change from fixed-point integer arguments to floating point in EVE API functions
...
Changed calls: PointSize(), LineWidth(), VertexTranslateX() and VertexTranslateY()
Units for all the above are now pixels, not fixed-point integers. This matches OpenGL.
Docstrings updated accordingly
2021-01-22 15:52:46 -08:00
10a44af536
Merge pull request #3980 from anecdata/reasons2
...
ESP32-S2 update docs to match code usage of IPPROTO_*
2021-01-21 15:16:55 -08:00
f88a896c03
Merge pull request #3854 from hierophect/esp-tcpserver
...
ESP32S2: Implement TCP Server bindings
2021-01-21 17:25:14 -05:00
2b4ad1ed03
Fix warnings that come from -O3 (I think)
2021-01-20 19:16:56 -08:00
733094aead
Add initial RP2040 support
...
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.
Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
2021-01-20 19:16:56 -08:00
d3995eaf97
Fixes from draft PR
2021-01-16 14:21:57 -06:00
b609bc0124
Removed unused include
2021-01-16 14:21:57 -06:00
ea0e2f80b7
Changing to duck-typing
2021-01-16 14:21:57 -06:00
287770f885
Merge remote-tracking branch 'upstream/main' into esp-tcpserver
2021-01-14 10:21:08 -05:00
8febdee264
Rename to match WIFI_REASON. Also include specific error code in "Unknown failure" Exception.
2021-01-13 23:47:23 -06:00
d1249fbe47
Include all reason codes.
2021-01-13 23:46:52 -06:00
37a8c1c575
Complete non-blocking implementations, add socket close checking
2021-01-13 19:05:07 -05:00
e703e06595
Update shared-bindings/socketpool/SocketPool.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-01-13 11:17:37 -06:00
4cdb298a20
WIP of non-blocking calls
2021-01-12 15:05:28 -05:00
f07dd487af
change IPPROTO_* comments to match usage in current shared-bindings and common-hal code
2021-01-12 13:49:50 -06:00
1ca29ec47c
Merge remote-tracking branch 'origin/main' into audioout-esp32
2021-01-12 09:23:07 -06:00
4db55652a3
Merge pull request #3964 from dhalbert/ble-timing-fixes
...
Round BLE timing values; fix timeout check
2021-01-11 16:52:14 -08:00
081249f796
Merge pull request #3944 from BennyE/wifi-authmode
...
esp32-s2: Adding authmode keyword
2021-01-11 16:05:28 -08:00
91245297e8
Merge pull request #3659 from iot49/msgpack
...
module msgpack
2021-01-11 15:22:39 -08:00
a397af9bdf
Round BLE timing values; fix timeout check
2021-01-10 13:16:19 -05:00
dd10c534c5
restore len(alarm.sleep_memory) and bool(alarm.sleep_memory)
2021-01-08 22:32:23 -05:00
30c6dd3f76
Merge remote-tracking branch 'origin/main' into audioout-esp32
2021-01-07 14:11:14 -06:00
66d87782be
Adding authmode keyword
2021-01-06 23:52:30 +01:00
cdad59fbc2
Fix doc build with extra blank lines
2021-01-06 09:03:58 -08:00
1a82555803
Merge branch 'main' into msgpack
2021-01-05 11:19:11 -08:00
90a299bb1e
added //| to (hopefully) get CI to pass
2021-01-05 11:17:09 -08:00
df4c028d29
_pixelbuf: error check in brightness setter ( fix #3753 )
2021-01-01 19:49:20 -05:00
0bad6110d4
update wake-alarm implementation
2020-12-31 02:44:20 +05:30
28ce5e8988
Merge branch 'main' into touch-s2
2020-12-30 22:44:22 +05:30
2cd377f1a7
audiobusio: Make PDMIn optional
2020-12-29 14:06:32 -06:00
c3396e4b49
Merge pull request #3868 from BennyE/wifi-enhancement-countrycode
...
esp32-s2: wifi enhancement to include countrycode
2020-12-28 11:49:41 -08:00
8061a2574d
Merge branch 'main' into pin_alarm
2020-12-23 22:05:02 -05:00
a11ad25727
BLE fixes
2020-12-23 16:39:27 -05:00
1fca297a2d
A couple sleep fixes
...
* Better messaging when code is stopped by an auto-reload.
* Auto-reload works during sleeps on ESP32-S2. Ticks wake up the
main task each time.
* Made internal naming consistent. CamelCase Python names are NOT
separated by an underscore.
2020-12-22 16:13:02 -08:00
d4e9eea397
mark alarm.wake_alarm during gc sweep
2020-12-22 08:11:01 -08:00
6347a3fcdb
Merge pull request #3812 from microDev1/ota-s2
...
Support for OTA update
2020-12-21 18:46:13 -08:00
75620884e6
Fix stubs, recv_into error
2020-12-21 13:26:43 -05:00
32736dd2c3
Implement server API
2020-12-20 17:12:03 -05:00
ecd7c0878e
expose wake pin parameter and more tweaks
2020-12-19 20:54:36 +05:30
6c4df5a8b4
adafruit_bus_device: Don't transmit STOP condition in write_then_readinto
...
Closes #3795
2020-12-18 11:13:54 -06:00
8eaf2b0c19
implement touch alarm
2020-12-18 12:54:36 +05:30
4512290ba0
Merge branch 'main' into ota-s2
2020-12-18 00:44:00 +05:30
4863413bc9
rename ota to dualbank
2020-12-18 00:34:56 +05:30
8f9cd7075e
Merge pull request #3752 from jepler/gcc10
...
build: Update to gcc10
2020-12-17 11:03:40 -05:00
1ad49d9a18
Add alarm.pin that wakes on pin level
...
Fixes #3787
2020-12-15 18:12:59 -08:00
3c4562c3ca
camera: Provide correct forward-declaration of camera_imageformat_type
...
This resolves the build error
```
arm-none-eabi-ld: build-spresense/libmpy.a(Camera.o):(.rodata.camera_imageformat_type+0x0): multiple definition of `camera_imageformat_type'; build-spresense/libmpy.a(__init__.o):(.rodata.camera_imageformat_type+0x0): first defined here
arm-none-eabi-ld: build-spresense/libmpy.a(ImageFormat.o):(.rodata.camera_imageformat_type+0x0): multiple definition of `camera_imageformat_type'; build-spresense/libmpy.a(__init__.o):(.rodata.camera_imageformat_type+0x0): first defined here
arm-none-eabi-ld: build-spresense/libmpy.a(Camera.o):(.rodata.camera_imageformat_type+0x0): multiple definition of `camera_imageformat_type'; build-spresense/libmpy.a(__init__.o):(.rodata.camera_imageformat_type+0x0): first defined here
```
2020-12-15 10:40:24 -06:00
e0afa32cfa
use RTC_DATA_ATTR; address review comments
2020-12-14 11:36:54 -05:00
210c0ec89c
add country(code) to wifi network objects)
2020-12-13 13:32:12 +01:00
37ee5e683d
Merge branch 'main' into ota-s2
2020-12-12 05:25:46 +05:30
92098ca06b
update docs, implement suggested changes
2020-12-12 05:15:25 +05:30
344d3c59cb
Merge branch 'main' into msgpack
2020-12-11 11:10:30 -08:00
08e94e6a20
add more docs
2020-12-11 22:55:22 +05:30
39124b888b
doc fixes
2020-12-11 09:03:45 -05:00
cf938983e9
SleepMemory + set alarm.wake_alarm
2020-12-11 08:10:26 -05:00
d29184b5a0
try without ... in docs
2020-12-10 12:15:43 -08:00
cb35abfd04
add docs, update translation & fix ota.flash()
2020-12-11 01:01:01 +05:30
6d2329fb09
add blank lines after all comment sections
2020-12-10 10:59:26 -08:00
5964163649
Initial SleepMemory code
2020-12-10 13:03:40 -05:00
07015ad527
add ability to switch boot partition
2020-12-10 16:42:45 +05:30
bfa2c604ef
add ability to flash in discontinuous chunks
2020-12-10 15:45:25 +05:30
dee86a014b
factor out esp_ota_end
2020-12-10 14:04:24 +05:30
3c724321d8
cosmetics
2020-12-09 12:01:09 -08:00
eedcc98cc5
Fix some spelling mistakes
2020-12-10 02:52:18 +11:00
a5c3dc286c
typing ...
2020-12-08 15:48:56 -08:00
9e7a7b9dc4
uglify typing hints
2020-12-08 14:38:20 -08:00
1f14d39364
remove two extra closing angular brackets
2020-12-08 11:50:45 -08:00
40118bcf57
Add `board_deinit` for use with sleep
...
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes #3786
2020-12-08 10:52:25 -08:00
1df033465a
Merge pull request #3806 from pewpew-game/rotarydoc
...
Remove warning about lack of support on M0 from rotaryio
2020-12-08 13:20:03 -05:00
2c546ab768
Remove warning about lack of support on M0 from rotaryio
...
It seems that this warning no longer applies.
2020-12-08 15:54:34 +01:00
fc23a0cc8a
implement ota module
2020-12-08 11:30:00 +05:30
413885a529
fix typspec in function declarations
2020-12-07 17:45:21 -08:00
9903c9e855
fixed (?) typespec for callback functions
2020-12-07 16:50:52 -08:00
5875a27fa8
removed extra triple quote
2020-12-07 16:32:38 -08:00
9412c3f58e
moved misplaced triple-quote
2020-12-07 16:22:09 -08:00
534b48fcfe
remove a ~ from doc that causes an error; add ExtType.c to circuitpy_defns.mk
2020-12-07 16:08:16 -08:00
b5b6b6d0f2
add ExtType, update doc, add a test
2020-12-07 15:40:02 -08:00
054eafd42f
Merge pull request #3797 from dhalbert/reset-reason-run-reason-available
...
Make ResetReason and RunReason available
2020-12-07 15:41:45 -05:00
169b487509
Include wifi.radio singleton in gc
2020-12-07 11:07:56 -05:00
9391c8f9dd
Make ResetReason and RunReason available
2020-12-06 12:00:00 -05:00
2f0e676fcb
update doc per review
2020-12-03 22:06:02 -05:00
57fa6bece8
allow radio.enabled to be settable
2020-12-03 21:27:35 -05:00
1130b80e2a
Merge pull request #3612 from gamblor21/bus_device
...
Moving Adafruit_CircuitPython_BusDevice to core
2020-12-02 13:23:02 -08:00
608c98501b
Merge remote-tracking branch 'adafruit/main' into msgpack
2020-12-02 13:10:39 -08:00
44bc75af37
output little endian; update example
2020-12-01 18:38:47 -08:00
f38bd59c6b
added signatures to documenation
2020-12-01 18:38:15 -08:00
e19782633a
removed blanks to make pre-commit check happy
2020-12-01 18:38:14 -08:00
513253bc3f
moved logic to shared-module and added documentation
2020-12-01 18:38:14 -08:00
90c203a3dd
add module msgpack
2020-12-01 18:38:14 -08:00
72fa7d88b8
fix doc errors
2020-12-01 20:13:46 -05:00
8b7c23c1ee
address review comments
2020-12-01 20:01:14 -05:00
d3bbb99e07
Fixing stubs
2020-12-01 17:49:15 -06:00
237385798c
Merge branch 'main' into bus_device
2020-12-01 15:47:16 -06:00
65e2fe4654
fix stub problems; touch up doc
2020-11-27 23:27:15 -05:00
596e0e4bd2
merge from upstream
2020-11-27 16:06:57 -05:00
e308a9ec11
working! PinAlarm not implemented yet.
2020-11-27 16:03:37 -05:00
104a089677
deep sleep working; deep sleep delay when connected
2020-11-26 22:06:37 -05:00
7923aa0a62
Merge pull request #3708 from hierophect/esp32s2-udp
...
ESP32-S2: Add UDP with recvfrom_into and sendto
2020-11-25 21:11:20 -06:00
6fd123a5c4
Merge pull request #3758 from tannewt/update_connect_doc
...
Update wifi.Radio.connect doc
2020-11-25 21:09:56 -06:00
ef0830bfe2
merge from upstream + wip
2020-11-25 17:52:06 -05:00
9dbea36eac
changed alarm.time API
2020-11-25 15:09:27 -05:00
f868cc5dd0
some API renaming and bug fixes; fix docs
2020-11-24 23:37:05 -05:00
ca1a85c47f
displayio: Fix ColorConverter make_* methods
2020-11-25 03:39:14 +01:00
4ac11c8d31
Update wifi.Radio.connect doc
...
Now it includes bssid info.
2020-11-24 17:54:39 -08:00
510f464234
Merge branch 'main' into esp32s2-udp
2020-11-24 18:28:10 -05:00
ba6e15b070
Fix stubs
2020-11-24 11:32:18 -05:00
9dd1783da5
Merge branch 'main' into ps2io-S2
2020-11-24 11:11:11 +05:30
7a45afc549
working, but need to avoid deep sleeping too fast before USB ready
2020-11-23 22:44:53 -05:00
8ffd973e22
Merge remote-tracking branch 'upstream/main' into esp32s2-udp
2020-11-23 18:40:14 -05:00
3abee9b256
compiles; maybe ready to test, or almost
2020-11-22 21:52:37 -05:00
a0f1ec3c4a
wip
2020-11-22 19:10:09 -05:00
75559f35cc
wip: ResetReason to microcontroller.cpu
2020-11-21 23:29:52 -05:00
e4c66990e2
compiles
2020-11-20 23:33:39 -05:00
39e1f52e28
wip; not compiling yet
2020-11-19 17:47:12 -05:00
649c930536
wip
2020-11-19 15:43:39 -05:00
b56645808c
fix crash on user code exit
2020-11-19 11:44:22 +05:30
5bb3c321e9
merge from main
2020-11-19 00:29:14 -05:00
682054a216
WIP: redo API; not compiled yet
2020-11-19 00:23:27 -05:00
f61f8f999b
EPaperDisplay: add rotation property
...
untested, because I don't want to mess my magtag demo up :) but it builds
2020-11-18 18:06:31 -06:00
0bbdf05936
Implement recvfrom_into and sendto for UDP
2020-11-17 16:11:04 -05:00
66fb095069
Merge pull request #3667 from microDev1/watchdog-s2
...
ESP32S2: Support for WatchDog
2020-11-16 15:01:54 -08:00
ffff02c053
Merge remote-tracking branch 'adafruit/main' into sleep
2020-11-16 12:06:11 -05:00
bb77f1d130
wip: initial code changes, starting from @tannewt's sleepio branch
2020-11-16 11:56:20 -05:00
78ccac930f
Add .busy property to EPaperDisplay
2020-11-13 18:57:52 -08:00
8d4296f964
Add board.DISPLAY to MagTag. Fix luma computation
...
* Initialize the EPaper display on the MagTag at start.
* Tweak the display send to take a const buffer.
* Correct Luma math
* Multiply the blue component, not add.
* Add all of the components together before dividing. This
reduces the impact of truncated division.
2020-11-13 18:57:52 -08:00
8d3a878152
Merge pull request #3681 from adafruit/6.0.x
...
Merge protomatter update back into `main`
2020-11-12 14:51:53 -08:00
9da99675b1
Correct display sequence format docs
2020-11-10 16:44:09 -08:00
21ca1b8c2b
Merge remote-tracking branch 'upstream/main' into esp32s2-udp
2020-11-10 14:59:32 -05:00
10e8b8cf45
move port specific check
2020-11-11 00:24:01 +05:30
0ff20cdd85
RGBMatrix: Detect invalid bit_depth selection
...
Closes : #3650
2020-11-09 08:27:46 -06:00
4c93db3595
Renamed to adafruit_bus_device
2020-11-03 18:35:20 -06:00
197539bd82
Moved I2CDevice and SPI to match python library
2020-11-03 17:30:33 -06:00
9bf77905e3
Merge pull request #3622 from sw23/main
...
Fixing remaining stub mypy issues + run check-stubs to CI
2020-11-02 18:16:32 -08:00
88fcf4ef7e
Removing implementation-specific values for socket/socketpool class attributes
2020-11-02 19:59:07 -05:00
8bbbb2833a
Fixes from testing SPI
2020-11-01 21:38:20 -06:00
7dd53804a0
Fixed stubs again
2020-11-01 10:31:31 -06:00
76c1153380
Fixed stubs
2020-11-01 08:57:31 -06:00
5ea09fe348
Fixed stubs
2020-10-31 13:37:05 -05:00
78477a374a
Initial SPI commit
2020-10-31 12:17:29 -05:00
144eb131ae
Merge pull request #3627 from adafruit/6.0.x
...
Merge 6.0.x bugfixes to main
2020-10-31 12:28:20 -04:00
1f179b3317
Adding socket and socketpool class attributes
2020-10-30 23:19:27 -04:00
6a63d20a5d
Fixing remaining stub mypy issues + run check-stubs to CI
2020-10-30 18:56:40 -04:00
9f3a1fe27b
Fixing stub for wifi_radio_ping
2020-10-30 01:29:58 -04:00
ad166ca479
Fixing make stub warnings and mypy issuesmak
2020-10-29 20:15:34 -04:00
e7da852db7
Fixing review comments
2020-10-29 16:13:03 -05:00
7fd73c7d39
Initial UDP work. Need to test
2020-10-28 18:08:31 -07:00
7cbc50962b
Merge pull request #3611 from tannewt/esp32s2_eink_portal
...
Add Adafruit ESP EInk Portal and grayscale EInk support
2020-10-28 14:45:29 -07:00
9a4efed8cb
Start tweaking the workflow to sleep
2020-10-27 17:55:03 -07:00
85dadf3a56
More API changes
2020-10-27 16:18:39 -07:00
1196d4bcf6
move to new module
2020-10-27 16:18:38 -07:00
930cf14dce
Add check for invalid io, function to disable all alarms
2020-10-27 16:17:26 -07:00
e35938971a
Add description of alarm modules
2020-10-27 16:16:55 -07:00
59df1a11ad
Add alarm_touch module
2020-10-27 16:16:52 -07:00
da449723df
Fix build error
2020-10-27 16:16:15 -07:00
4d8ffdca8d
restructure alarm modules
2020-10-27 16:15:09 -07:00
e5ff55b15c
Renamed alarm modules
2020-10-27 16:13:25 -07:00
21ba61afbb
Add function to disable alarm
2020-10-27 16:13:25 -07:00
05a3f203db
Add function to get time elapsed during sleep
2020-10-27 16:13:25 -07:00
e310b871c8
Get io wake working
2020-10-27 16:13:25 -07:00
90b9ec6f2c
Initial Sleep Support
2020-10-27 16:13:22 -07:00
2374b0d013
Fixed whitespace issues
2020-10-27 09:13:14 -05:00
9ec224539b
Clean up
2020-10-27 08:43:51 -05:00
0d1649880f
Add grayscale EInk support
2020-10-26 16:59:59 -07:00
8a379830a8
Added doc and translations
2020-10-26 16:54:24 -05:00
99a3750a2c
Fix lost board.SPI and board.I2C after explicitly deiniting them.
...
After calling board.SPI().deinit(), calling board.SPI() again would return the unusable deinited object and there was no way of getting it back into an initialized state until the end of the session.
2020-10-26 22:44:38 +01:00
c9f7df3bab
canio: Give implementation-specific limits for CAN.Listen
2020-10-26 10:06:49 -05:00
12d770b427
Added __probe_for_device
2020-10-25 10:15:45 -05:00
b637d3911e
Initial commit
2020-10-24 20:48:35 -05:00
38c8248b9e
Merge branch 'main' into color-converter-transparency
2020-10-19 18:13:44 -05:00
c5d8c12e34
Merge pull request #3563 from gamblor21/recv_into_size_check
...
Add socketpool.socket.recv_into size check
2020-10-19 15:40:41 -07:00
d2dada869c
displayio: Update docs for ColorConverter's make_opaque
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2020-10-19 17:27:01 -05:00
d606a3e968
Merge pull request #3484 from astrobokonon/esp32s2-morenet
...
Esp32s2: Expose more network parameters
2020-10-19 15:07:20 -07:00
575b2e607b
Merge branch 'main' into color-converter-transparency
2020-10-16 19:55:24 -05:00
74c07a4bdc
displayio: Add in opaque pixel option for future
2020-10-16 19:50:41 -05:00
8e6d3e5b91
Merge branch 'main' into recv_into_size_check
2020-10-16 15:52:45 -05:00
9d840aab0b
Cleaned up and now testing
2020-10-15 23:45:11 -07:00
b336039aab
Disable the long way and return an ap_info object
...
still needs work and cleanup
2020-10-15 23:18:30 -07:00
fa75231ae3
Added max size check to recv_into
2020-10-15 18:46:42 -05:00
26fd2c6223
Add hostname validation
2020-10-15 16:08:01 +05:30
b02a5bcbd5
displayio: Remove verbose error
2020-10-14 23:05:19 -05:00
3c5a08628a
Merge branch 'color-converter-transparency' of github.com:jensechu/circuitpython into color-converter-transparency
2020-10-14 21:52:49 -05:00
2517e4b486
displayio: ColorConverter handle if opaque color is black
2020-10-14 21:51:40 -05:00
18fbff4f57
Update wifi hostname method
2020-10-14 11:11:59 +05:30
ceb531086e
Add method to set custom hostname
2020-10-13 14:22:02 +05:30
de9ea47e8e
Merge branch 'main' into color-converter-transparency
2020-10-12 20:48:55 -05:00
337019626a
displayio: Add make_transparent to ColorConverter
2020-10-12 20:48:04 -05:00
b359e2945a
displayio: Add make_transparent and make_opaque to ColorConvertor
2020-10-12 20:48:04 -05:00
57b44928a3
displayio: Pass transparent_color to ColorConverter
...
Signed-off-by: Jensen <jensechu@gmail.com>
2020-10-12 20:48:04 -05:00
5e38bb98cb
rgbmatrix: update protomatter to 1.0.5 tag
...
this is compile-tested on
stm32f405 feather
matrixportal
nrf52840 feather
but not actually tested-tested.
2020-10-10 14:30:37 -05:00
b227b79dec
Fix #3504 : Don't use time module in pew.tick()
...
The time.sleep() and time.monotonic() functions break the timer
interrupt on which PewPew10 display relies, so we can't use them
anymore. Instead I'm adding a time-keeping function to the display
code itself, which then can be used in pew.tick() internally.
2020-10-10 20:26:33 +02:00
375676ff58
Merge pull request #3501 from hierophect/esp32-analogin
...
ESP32S2: Add AnalogIn
2020-10-09 14:10:24 -07:00
99f27bea61
Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet
2020-10-08 12:43:52 -07:00
9fcf96cb64
Replace _bleio.ConnectionError with the native version
...
Replace uses of _bleio.ConnectionError with regular ConnectionError
Fixes #3008
2020-10-07 17:11:32 -07:00
8c428a3bdd
Merge pull request #3492 from hierophect/esp32-update-idf
...
ESP32S2: move to official IDF submodule
2020-10-06 16:53:32 -07:00
68cb384f8f
Remove logging from shared-bindings, fix translations, revert config target macro
2020-10-06 13:29:12 -04:00
e93a274f2f
Merge branch 'main' into esp32-analogin
2020-10-05 13:02:42 -04:00
c27e3857b6
Merge branch 'main' into framebuffer-zero-size
2020-10-01 11:04:21 -07:00
e477d27be3
Update shared-bindings/rgbmatrix/RGBMatrix.c
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2020-10-01 10:59:02 -05:00
5ac3c36d64
Merge pull request #3450 from mdroberts1243/New_quirk_for_SH1107
...
New quirk for sh1107
2020-09-30 12:03:10 -07:00
9f19a8a760
Ran pre-commit locally
2020-09-30 11:06:13 -07:00
66b8559fd4
Change submodule, rework all includes
2020-09-30 11:26:07 -04:00
88cbf772df
canio.CAN: clarify read-only status of several properties
2020-09-29 20:13:52 -05:00
e4b9c16891
rgbmatrix: Check that the number of rgb pins is supported.
...
Having zero RGB pins may not have been caught, nor having a non-multiple-of-6
value. Generally, users will only have 6 RGB pins unless they are driving
multiple matrices in parallel. No existing breakouts exist to do this, and
there are probably not any efficient pinouts to be had anyway.
2020-09-29 19:55:31 -05:00
176b337611
rgbmatrix: validate width= constructor parameter
...
In #3482 , @cwalther noted that, hypothetically, a zero byte allocation
could be made in the RGBMatrix constructor. Ensure that width is positive.
Height was already checked against the number of RGB pins if it was specified,
so zero is ruled out there as well.
2020-09-29 19:44:25 -05:00
d79f4e2662
canio: doc improvement -- don't needlessly call out deinit behavior
2020-09-29 14:32:27 -05:00
611f81ac1a
canio: actually drop the _error_count properties
...
thanks @tannewt
2020-09-29 14:25:53 -05:00
1bea099eb2
Allow the _state_count properties to be unimplemented
...
This is the case on the SPI implementations MCP2515 and MCP2518.
2020-09-29 14:05:50 -05:00
03bd968450
more doc improvements
2020-09-28 19:56:19 -05:00
979ec3a458
can: RemoteTransmissionRequest: remove duplicate docstrings
2020-09-28 19:47:06 -05:00
2a4a244245
Add ap_ssid and ap_bssid
2020-09-28 17:25:09 -07:00
66d55738c1
Enable DNS info
2020-09-28 16:49:20 -07:00
b1e1237887
Merge branch 'main' into New_quirk_for_SH1107
2020-09-28 19:40:47 -04:00
04e434a7ce
canio: remove stray remote_transmission_request method declaration
2020-09-28 17:22:02 -05:00
f4e36fc7f6
CAN: Use mp_obj_t insteaed of canio_message_obj_t, get rid of rtr field
2020-09-28 17:22:00 -05:00
13493730a1
canio: CAN.Match: improve how an unspecified `mask` is implemented
...
0 should actually indicate a "match everything" filter which you otherwise
couldn't indicate with any single Match object, and an
all-address-bits-set number should indicate a "match single address"
filter. Use an optional/default None argument to do the job.
2020-09-28 17:22:00 -05:00
Jeff Epler
Dan Halbert
Jeff Epler
Dan Halbert
gamblor21
Lucian Copeland
Scott Shawcroft
Scott Shawcroft
microDev
root
James Bowman
anecdata
BennyE
iot49
Bernhard Boser
@brrzap
Mike Causer
Radomir Dopieralski
Bernhard Boser
Mark
Jeff Epler
arturo182
sw23
Christian Walther
Jensen Kuras
Ryan T. Hamilton
Mark Roberts