Commit Graph

14453 Commits

Author SHA1 Message Date
Damien George c9baf498c8 lib/micropython-lib: Update submodule to latest.
This brings in the bundle-networking package.

Signed-off-by: Damien George <damien@micropython.org>
2023-02-01 12:42:06 +11:00
David Lechner 3446d440f6 shared/runtime/gchelper: Drop cpu directive from ARM asm helpers.
This drops the `.cpu` directive from the ARM gchelper_*.s files.  Having
this directive breaks the linker when targeting older CPUs (e.g. `-mthumb
-mthumb-interwork` for `-mcpu=arm7tdmi`).  The actual target CPU should be
determined by the compiler options.

The exact CPU doesn't actually matter, but rather the supported assembly
instruction set.  So the files are renamed to *_thumb1.s and *thumb2.s to
indicate the instruction set support instead of the CPU support.

Signed-off-by: David Lechner <david@pybricks.com>
2023-01-28 15:51:38 +11:00
robert-hh c2ab1b5185 esp32/boards/OLIMEX_ESP32_POE: Remove id from and update board.json. 2023-01-28 15:29:01 +11:00
robert-hh 0baf6c80d9 nrf/mpconfigport: Enable seeding of the PRNG by the hardware RNG.
A suitable function already existed, so just the declaration was needed.
2023-01-28 15:23:26 +11:00
Jay Greco be420bf9bb rp2/boards/NULLBITS_BIT_C_PRO: Add Bit-C PRO board. 2023-01-28 15:14:48 +11:00
Damien George 67fac4ebc5 rp2/machine_pin: Fix configuring OPEN_DRAIN with initial value.
Prior to this commit, Pin(Pin.OPEN_DRAIN, value=0) would not set the
initial value of the open-drain pin to low, instead it would be high.

Signed-off-by: Damien George <damien@micropython.org>
2023-01-24 17:29:45 +11:00
Damien George 8a0353525f rp2/main: Use mp_printf in nlr_jump_fail.
The mp_plat_print output is already being used by the subsequent call to
mp_obj_print_exception().  And this eliminates all references to printf for
this port (at least in non-debug builds).

Signed-off-by: Damien George <damien@micropython.org>
2023-01-24 16:58:29 +11:00
Damien George 1978b838b7 shared/runtime: Use mp_printf consistently, instead of printf.
Signed-off-by: Damien George <damien@micropython.org>
2023-01-24 16:57:26 +11:00
Damien George 31139b437a py/mkrules: Support mpy-tool-flags in cmake frozen code generation.
Signed-off-by: Damien George <damien@micropython.org>
2023-01-24 16:55:23 +11:00
Damien George d387ae3444 py/objint_mpz: Catch and reject @ and @= operating on big integers.
This will also catch / and /= when float support is disabled.

Fixes issue #10544.

Signed-off-by: Damien George <damien@micropython.org>
2023-01-23 13:03:51 +11:00
robert-hh d4a4cde42e rp2: Fix crash in a pin.irq handler.
When accessing the argument of the irq function.
2023-01-22 17:49:10 +01:00
Damien George 4f3780a156 examples/embedding: Rework example to use ports/embed.
Signed-off-by: Damien George <damien@micropython.org>
2023-01-20 22:28:50 +11:00
Damien George a8a1ad1391 embed: Add new "embed" port which builds a simple C package.
Signed-off-by: Damien George <damien@micropython.org>
2023-01-20 22:28:50 +11:00
Alex Riesen abaa4abd2d py: Add parenthesis to default impl of MP_OBJ_TO_PTR, MP_OBJ_FROM_PTR.
Unless MICROPY_OBJ_REPR == MICROPY_OBJ_REPR_D, these macros only work with
values and "->"/"." expressions as their sole argument.  In other words,
the macros are broken with expressions which contain operations of lower
precedence than the cast operator.

Depending on situation, the old code either results in compiler error:

 MP_OBJ_TO_PTR(flag ? o1 : o2) expands into "(void *)flag ? o1 : o2",
 which some compiler configurations will reject (e.g. GCC -Wint-conversion
 -Wint-to-pointer-cast -Werror)

Or in an incorrect address calculation:

 For ptr declared as "uint8_t *" the MP_OBJ_FROM_PTR(ptr + off)
 expands into ((mp_obj_t)ptr) + off, resulting in an obviously
 wrong address.

Signed-off-by: Alex Riesen <alexander.riesen@cetitec.com>
2023-01-20 21:59:49 +11:00
小权一句两句 94ee1b629a unix/main: Free pathbuf when there's an error opening a file. 2023-01-20 19:38:14 +11:00
Jim Mussared fb8792c095 py/lexer: Wrap in parenthesis all f-string arguments passed to format.
This is important for literal tuples, e.g.

    f"{a,b,}, {c}" --> "{}".format((a,b), (c),)

which would otherwise result in either a syntax error or the wrong result.

Fixes issue #9635.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-01-20 17:54:32 +11:00
Andrew Leech 5c4153ea37 py/objarray: Raise error on out-of-bound memoryview slice start.
32-bit platforms only support a slice offset start of 24 bit max due to the
limited size of the mp_obj_array_t.free member.  Similarly on 64-bit
platforms the limit is 56 bits.

This commit adds an OverflowError if the user attempts to slice a
memoryview beyond this limit.

Signed-off-by: Damien George <damien@micropython.org>
2023-01-20 16:31:37 +11:00
robert-hh d6bc34a13a esp32: Add a small delay before leaving wlan.active().
The delay is 1 ms. It avoids the crashes reported by the
issues #8289, #8792 and #9236 with esp-idf versions >= 4.2, but does
not solve an underlying problem in the esp-idf.
2023-01-19 21:31:46 +01:00
ma-lalonde 30db33d1e0 esp32/network_lan: Add support for Ethernet PHY KSZ8081.
This is available since ESP-IDF v4.4.

Signed-off-by: Damien George <damien@micropython.org>
2023-01-19 22:50:41 +11:00
Clayton Cronk 54e85fe212 esp32/boards/GENERIC_UNICORE: Add board definition for unicore chips.
Tested to work on an ESP32-MINI-1, which is a single core ESP32-U4DWH.

Signed-off-by: Clayton Cronk <awesomecronk@gmail.com>
2023-01-19 22:38:02 +11:00
robert-hh 32a858e254 esp32/boards: Add board definition for Olimex ESP32 PoE boards.
The major setting is about the PHY interface configuration.  The
configuration matches the Olimex ESP32 Gateway as well.

Tested with esp-idf v4.2.4 and Olimex ESP32 POE boards.
2023-01-19 20:24:06 +11:00
iabdalkader 3b5cafc716 stm32/Makefile: Leave DFU mode after download when using dfu-util.
Not all DFU bootloaders exit after download, this modifier is required for
some boards to reset, otherwise they sit idle in DFU mode.
2023-01-19 16:23:22 +11:00
Angus Gratton 36347817ec CODECONVENTIONS: Explain uncrustify dependency for pre-commit setup.
pre-commit manages its own dependencies otherwise (including Black), but
this one is a C/C++ binary so needs to be installed independently.

Signed-off-by: Angus Gratton <angus@redyak.com.au>
2023-01-19 16:10:21 +11:00
enriquezgarc 5c10727b68 docs/zephyr/quickref: Fix zsensor module usage examples.
Signed-off-by: enriquezgarc <enriquezgarcia.external@infineon.com>
2023-01-19 16:04:24 +11:00
Chris Overgaauw 23ef29706e docs/reference/constrained: Add missing heap-dump symbols to mem_info(). 2023-01-19 15:59:29 +11:00
LiaoJingyi_winY7kp 7f6345a973 docs/library/machine.Timer: Add freq argument to machine.Timer.
Based on and tested on the rp2 port.

Signed-off-by: Liao Jingyi <liaojingyi2@gmail>
Signed-off-by: Damien George <damien@micropython.org>
2023-01-19 15:47:45 +11:00
Juan Francisco Cantero Hurtado 720f2cfba9 unix/Makefile: Disable building the shared library of libffi.
MicroPython doesn't need the shared library and disabling it in the
configure could ease the build of a static version of MicroPython.
2023-01-19 15:24:43 +11:00
Damien George 4eb7063608 esp8266/README: Remove notice about port being "experimental".
It has been around for a long time and the API is mature enough.

Signed-off-by: Damien George <damien@micropython.org>
2023-01-19 14:59:18 +11:00
Antonello Margottini e30e543a75 esp8266/modnetwork: Add ability to set tx power for WLAN interface. 2023-01-19 13:39:05 +11:00
Maripo GODA fb0dd86b39 esp32/machine_sdcard: Change dma_channel to SPI_DMA_CH_AUTO for ESP32S3.
Specifying DMA channel 2 causes an "invalid dma channel" error.  In
ESP-IDF, the only available channel for ESP32S3 is SPI_DMA_CH_AUTO=3.
2023-01-19 13:13:42 +11:00
Damien George 67097d8c2b esp32/network_lan: Fix compilation on IDF lower than v4.4.
Signed-off-by: Damien George <damien@micropython.org>
2023-01-18 13:47:10 +11:00
Damien Tournoud c7301b8d03 esp32/network_lan: Fix setting MAC address of ethernet devices.
`esp_eth_ioctl(ETH_CMD_S_MAC_ADDR)` sets the MAC address of the hardware
device, but we also need to notify the upper layers of the change so that
e.g. DHCP work properly.
2023-01-18 11:19:12 +11:00
Damien Tournoud e982c1d8de esp32/network_lan: Add support for SPI-based ethernet chips.
Add support for various SPI-based ethernet chips (W5500, KSZ8851SNL,
DM9051) to the ESP32 port.  This leverages the existing support in ESP-IDF
for these chips -- which configures these chips in "MAC raw" mode -- and
the existing support for network.LAN in the ESP32 port.  In particular,
this doesn't leverage the wiznet5k support that is used on the rp2 and
stm32 ports (because that's for native use of lwIP).

Tested on the POE Featherwing (with the SJIRQ solder jumper bridged) and a
ESP32-S3 feather.

A note about the interrupt pin: The W5500 implementation within ESP-IDF
relies on hardware interrupt, and requires the interrupt pin from the W5500
to be wired to a GPIO.  This is not the case by default on the Adafruit
Ethernet FeatherWing, which makes it not directly compatible with this
implementation.
2023-01-18 11:16:09 +11:00
robert-hh 30bac47b12 docs/esp32/quickref: Add docs for the LAN interface constructor.
Incorporating PR #7356.
2023-01-18 10:06:53 +11:00
robert-hh 4b52003fb8 esp32/network_lan: Support configuration of ETH ref_clk pin.
Both the direction and the Pin used for ref_clk can now be configured.  It
Requires at least idf v4.4.  The new keyword arguments to the constructor
are:

- ref_clk_mode=mode: with mode being Pin.IN or Pin.OUT.  If it is not set,
  then the default configuration is used, which may be configured by
  kconfig settings.

- ref_clk=pin_obj: which defines the Pin used for ref_clk.  This is either
  Pin(0), Pin(16) or Pin(17).  No check is done for the pin number.  If it
  is the wrong one, it simply will not work.  Besides that, no harm.
2023-01-18 10:05:13 +11:00
robert-hh efb4bd3555 esp32/network_lan: Add support for LAN8710 PHY.
LAN8710 uses the same drivers as LAN8720, so this commit just adds the
names.  Alternatively, both could be summarised under LAN87xx, like the
esp-idf does.
2023-01-18 10:04:31 +11:00
Damien George fc745d85fe tests/extmod/ure_namedclass: Add tests for named classes in class sets.
Signed-off-by: Damien George <damien@micropython.org>
2023-01-18 09:15:32 +11:00
Damien George 64193c7de9 lib/re1.5: Add support for named classes in class sets.
Total code size change of this and previous commit:

   bare-arm:    +0 +0.000%
minimal x86:    +0 +0.000%
   unix x64:   +32 +0.004% standard
      stm32:   +24 +0.006% PYBV10
     cc3200:   +16 +0.009%
    esp8266:   +20 +0.003% GENERIC
      esp32:   +44 +0.003% GENERIC[incl +8(data)]
     mimxrt:   +32 +0.009% TEENSY40
 renesas-ra:   +24 +0.004% RA6M2_EK
        nrf:    +0 +0.000% pca10040
        rp2:   +24 +0.005% PICO
       samd:   +32 +0.012% ADAFRUIT_ITSYBITSY_M4_EXPRESS

Addresses issue #7920.

Signed-off-by: Damien George <damien@micropython.org>
2023-01-18 09:15:32 +11:00
Damien George bd86ce5f82 lib/re1.5: Reduce code size when checking for named class char.
Signed-off-by: Damien George <damien@micropython.org>
2023-01-18 09:15:32 +11:00
robert-hh 1583c1f670 mimxrt: Set MICROPY_GC_STACK_ENTRY_TYPE to uint32_t for large RAM.
It was uint16_t. The change sets it to uint32_t for devices with SDRAM.

Fixes issue #10366.
2023-01-16 12:26:39 +11:00
robert-hh e78e0b7418 py/gc: Increase the address length in gc_dump_alloc_table().
Showing 8 digits instead of 5, supporting devices with more than 1 MByte of
RAM (which is common these days).  The masking was never needed, and the
related commented-out line can go.
2023-01-16 12:09:20 +11:00
David Lechner 4eefe78e8e github/workflows/code_size: Print code size change.
The intention of using `tee` is to both print the code size change in
the CI logs and save them to a file. Using redirection to a file
caused it to not print the changes.

Signed-off-by: David Lechner <david@pybricks.com>
2023-01-16 12:06:17 +11:00
iabdalkader d02f089058 rp2/boards: Add pin CSV files to board definitions.
Pin defines are:
- For Pico define board pins and the default LED pin (WL_GPIO25).
- For Pico-W define board pins, external pins and the default
  LED pin (WL_GPIO0).
- For the Nano-RP2040, define board pins, external pins and
  the default LED pin (GPIO25)
- For all other boards, the pins.csv defines the LED pin (if any)
  for backwards compatibility with code that assumes there's always
  an LED pin.
2023-01-16 11:44:28 +11:00
iabdalkader 7d01f38170 drivers/ninaw10: Implement machine.Pin external pin controls. 2023-01-16 11:44:28 +11:00
iabdalkader c214c9e648 rp2/machine_pin: Add support for named pins and alternate functions.
This commit adds support for generating named pin mappings for all pins
including CPU, board-defined, LED and externally controlled pins.  CPU pins
are mapped to `pin_GPIO<n>`, externally-controlled pins are mapped to
`pin_EXT_GPIO<n>`, and defined conditionally (up to 10 pins, and can be
expanded in the future), and they are non-const to allow `machine-pin.c` to
write the pin object fields.  Both CPU and externally controlled pins are
generated even if there's no board CSV file; if one exists it will just be
added to board pins.
2023-01-16 11:44:26 +11:00
iabdalkader 66e0cfc3b9 rp2/machine_pin: Refactor the machine.Pin class for external GPIO.
Handle externally controlled GPIO pins more generically, by removing all
CYW43-specific code from `machine_pin.c`, and adding hooks to initialise,
configure, read and write external pins.  This allows any driver for an
on-board module which controls GPIO pins (such as CYW43 or NINA), to
provide its own implementation of those hooks and work seamlessly with
`machine_pin.c`.
2023-01-16 11:37:18 +11:00
Dorukyum f4811b0b42 docs/library/socket: Use correct sockaddr variable name.
Signed-off-by: Dorukyum <doruk.ak@hotmail.com>
2023-01-13 17:40:01 +11:00
Jos Verlinde d263438a6e tools/pyboard.py: Set DTR on Windows to avoid ESPxx hard reset.
Fixes issue #9659.

Signed-off-by: Jos Verlinde <Jos.Verlinde@Microsoft.com>
2023-01-13 16:51:31 +11:00
Jim Mussared aa64280666 tools/pyboard.py: Add fs_{listdir,readfile,writefile,stat}.
These are for working with the filesystem when using pyboard.py as a
library, rather than at the command line.

- fs_listdir returns a list of tuples, in the same format as os.ilistdir().
- fs_readfile returns the contents of a file as a bytes object.
- fs_writefile allows writing a bytes object to a file.
- fs_stat returns an os.statresult.

All raise FileNotFoundError (or OSError(ENOENT) on Python 2) if the file is
not found (or PyboardError on other errors).

Updated fs_cp and fs_get to use fs_stat to compute file size.

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-01-13 16:38:34 +11:00
Jim Mussared 6013d27dd5 tools/pyboard.py: Add parse kwarg to eval.
This is useful when using pyboard.py as a library rather than at the
command line.

    pyb.eval("1+1") --> b"2"
    pyb.eval("{'a': '\x00'}") --> b"{'a': '\\x00'}"

Now you can also do

    pyb.eval("1+1", parse=True) --> 2
    pyb.eval("{'a': '\x00'}", parse=True) --> {'a': '\x00'}

This work was funded through GitHub Sponsors.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-01-13 16:38:34 +11:00