Michael Himing
c92c8ac184
Only enable is31fl3741 for led glasses board
...
Also fix a warning in is31fl3741
2022-02-01 09:45:50 +11:00
Dan Halbert
93a60eecab
Merge pull request #5946 from tammymakesthings/pr4218-neopixel-show-after-deinit
...
Fixes neopixel show() after deinit() not raising an exception
2022-01-29 18:30:37 -05:00
Dan Halbert
a88969d306
Revert "Disabled audioio, audiobusio, USB midi for sparkfun_redboard_turbo to save flash space"
...
This reverts commit 5e2166673b
2022-01-29 17:06:26 -05:00
Dan Halbert
6e98186f0d
turn off more things on SAMD21 full builds
2022-01-29 17:05:51 -05:00
Tammy Cravit
5e2166673b
Disabled audioio, audiobusio, USB midi for sparkfun_redboard_turbo to save flash space
2022-01-29 14:31:58 -07:00
Dan Halbert
472cbcfaae
Merge pull request #5940 from UnexpectedCircuitPython/main
...
Added initial support for my new TinyS3, FeatherS3 and ProS3
2022-01-29 13:36:35 -05:00
Limor "Ladyada" Fried
7ba23ffac4
Merge pull request #5945 from EmergReanimator/stm_deinited_fix
...
Fixed common_hal_busio_uart_deinited incorrect pin assignment check.
2022-01-29 12:19:12 -05:00
Seon Rozenblum
1277852501
Added initial support for my new TinyS3, FeatherS3 and ProS3 ESP32-S3 development boards
2022-01-29 14:04:57 +11:00
Scott Shawcroft
019aecaa20
Support BLE advertising on ESP
...
Services and characteristics still won't work.
Progress on #5926
2022-01-27 17:40:37 -08:00
Dan Halbert
fff68c9f86
Merge pull request #5927 from tannewt/esp_ble_scan
...
Add BLE scanning for S3 and C3.
2022-01-27 13:05:24 -05:00
Scott Shawcroft
d9966c1724
Add TODOs and -Os for RISC-V
2022-01-26 17:07:20 -08:00
Scott Shawcroft
e409ff75cd
Turn off BLE HCI on ESP32-S2
2022-01-26 09:46:29 -08:00
EmergReanimator
66cf66f118
Fixed common_hal_busio_uart_deinited incorrect pin assignment check.
...
The pin must be tested instead of pin->number in the same way as in STM
I2C busio layer.
2022-01-26 17:46:42 +01:00
microDev
fa2d156d14
return default cpu frequency on espressif
2022-01-26 12:32:48 +05:30
Scott Shawcroft
b2e1dbd2df
Implement name and address get/set
2022-01-25 19:17:26 -08:00
Scott Shawcroft
5a6f456dbb
Add BLE scanning for S3 and C3.
...
Everything else should raise NotImplementedError.
First step in #5926
2022-01-25 16:28:46 -08:00
jerryneedell
9c31346c45
fix implmetation
2022-01-25 16:42:49 -05:00
jerryneedell
70512758a9
enable binascii in microbit_v2 build
2022-01-25 16:06:47 -05:00
Scott Shawcroft
4a3c636b6b
Merge pull request #5874 from dkulinski/epaper_two_byte_length
...
Update EPaperDisplay to allow for two byte sequence length
2022-01-25 11:13:36 -08:00
Dan Kulinski
19f9163892
Bringing branch up to date with current main
2022-01-25 11:02:00 -07:00
microDev
324ff9c30d
bump idf to latest commit on v4.4 branch
2022-01-25 18:01:09 +05:30
Dan Kulinski
60801066b2
Fix magtag, openbook for EPaperDisplay constructor
2022-01-24 12:34:01 -07:00
root
367a1d53c0
Fixes for pulsein on ESP32S3
2022-01-23 13:14:34 -06:00
Michael Himing
4d78e3401c
Fix esp32s3 devkitc uart naming and add board.UART
2022-01-22 15:25:33 +11:00
Dan Halbert
5933c04499
Merge pull request #5899 from tannewt/rp2040_winbond
...
Add winbond to Feather RP2040
2022-01-21 16:44:52 -05:00
Scott Shawcroft
9a353a4f56
Merge pull request #5422 from Neradoc/nera-secondary-I2C
...
Allow multiple board buses
2022-01-21 11:08:14 -08:00
Scott Shawcroft
f2713afff6
Merge pull request #5896 from dhalbert/open-modes-check
...
Validate open() mode
2022-01-21 10:50:43 -08:00
Scott Shawcroft
c598ede84e
Add winbond to Feather RP2040
2022-01-21 10:34:38 -08:00
microDev
3970aa5a5e
fix build failure on two boards
2022-01-21 10:11:33 +05:30
microDev
67293c265c
Merge branch 'main' into board-bus
2022-01-21 10:08:39 +05:30
MicroDev
dab35f7c72
Merge pull request #5880 from jepler/espressif-serial-trick-uf2
...
Request ROM bootloader when resetting using the 'serial trick'
2022-01-21 09:56:12 +05:30
Dan Halbert
fed5227de9
shrink stringcar_m0_express
2022-01-20 20:34:04 -05:00
Jeff Epler
ea30a8ac04
Reboot into the ROM bootloader from 1200 baud
...
Per Scott, the purpose of this trick is to make the board programmable from Arduino even when CP is installed, so my convenience of escaping into UF2 is not going to work out.
2022-01-20 18:50:50 -06:00
Scott Shawcroft
35175715f9
Check target defined
2022-01-20 14:11:33 -08:00
Scott Shawcroft
d99847b410
Refactor pin reset on ESP
...
This makes it easier to blanket never reset flash and USB pins. It
also allows us to set a custom state after reset. The first case
is for the double tap reset that needs to be pulled low.
Fixes #5893
2022-01-20 12:40:41 -08:00
Scott Shawcroft
13db65566d
ESP NeoPixel fixes
...
This tweaks the RMT timing to better match the 1/3 and 2/3 of 800khz
guideline for timing. It also ensures a delay of 300 microseconds
with the line low before reset.
Pin reset is now changed to the IDF default which pulls the pin up
rather than CircuitPython's old behavior of floating the pin.
Fixes #5679
2022-01-19 16:29:07 -08:00
Dan Halbert
8bae6af12a
Merge pull request #5888 from tannewt/esp_tick_core
...
Ensure supervisor_tick is run on the same core as CP
2022-01-19 19:26:50 -05:00
Kattni Rembor
880d43a4f7
Fix pin typo.
2022-01-19 17:04:30 -05:00
Scott Shawcroft
42fbebe62a
Merge pull request #5832 from ladyada/main
...
ESP32S2 camera board draft
2022-01-19 12:04:13 -08:00
Scott Shawcroft
78942112c7
Ensure supervisor_tick is run on the same core as CP
2022-01-19 11:36:40 -08:00
lady ada
f13ea93fe6
fix A5 pin name
2022-01-19 14:22:01 -05:00
lady ada
6d7472357d
newline
2022-01-18 20:46:09 -05:00
Scott Shawcroft
7ee5c01cf8
Add Espressif C3 dev board
2022-01-18 17:39:52 -08:00
lady ada
09cf95a51c
no psram :(
2022-01-18 20:14:17 -05:00
lady ada
de45a20b08
EOF
2022-01-18 20:14:17 -05:00
lady ada
71c792d608
try initial esp32s3 qtpy def
2022-01-18 20:14:17 -05:00
lady ada
d4dab79234
add buttonpin
2022-01-18 20:14:17 -05:00
lady ada
c1cee63c5a
fix tuplecompile
2022-01-18 20:14:17 -05:00
lady ada
1d44bf1c0c
add camera data port
2022-01-18 20:14:17 -05:00
lady ada
3381ac149e
fix camera display io to use default spi bus
2022-01-18 20:14:16 -05:00
