2bb44f6c4d
Merge pull request #3486 from microDev1/fixTranslate
...
Update make translate script
2020-09-29 14:32:49 -05:00
611f81ac1a
canio: actually drop the _error_count properties
...
thanks @tannewt
2020-09-29 14:25:53 -05:00
4c7d9e3aaf
Update make translate script
2020-09-29 11:14:30 +05:30
d4ee440a91
Merge pull request #3475 from tannewt/esp_uf2
...
Reorganize sdkconfigs and release UF2s
2020-09-28 20:39:37 -05:00
dd6e7f5a8a
mimxrt10xx: Add required header for NORETURN definition
2020-09-28 18:56:01 -05:00
1dbb59271c
esp32: Use esp_restart from reset_to_bootloader; redeclare it NORETURN
2020-09-28 18:56:01 -05:00
726dcdb60a
Add some NORETURN attributes
...
I have a function where it should be impossible to reach the end, so I put in a safe-mode reset at the bottom:
```
int find_unused_slot(void) {
// precondition: you already verified that a slot was available
for (int i=0; i<NUM_SLOTS; i++) {
if( slot_free(i)) {
return i;
}
}
safe_mode_reset(MICROPY_FATAL_ERROR);
}
```
However, the compiler still gave a diagnostic, because safe_mode_reset was not declared NORETURN.
So I started by teaching the compiler that reset_into_safe_mode never returned. This leads at least one level deeper due to reset_cpu needing to be a NORETURN function. Each port is a little different in this area. I also marked reset_to_bootloader as NORETURN.
Additional notes:
* stm32's reset_to_bootloader was not implemented, but now does a bare reset. Most stm32s are not fitted with uf2 bootloaders anyway.
* ditto cxd56
* esp32s2 did not implement reset_cpu at all. I used esp_restart(). (not tested)
* litex did not implement reset_cpu at all. I used reboot_ctrl_write. But notably this is what reset_to_bootloader already did, so one or the other must be incorrect (not tested). reboot_ctrl_write cannot be declared NORETURN, as it returns unless the special value 0xac is written), so a new unreachable forever-loop is added.
* cxd56's reset is via a boardctl() call which can't generically be declared NORETURN, so a new unreacahble "for(;;)" forever-loop is added.
* In several places, NVIC_SystemReset is redeclared with NORETURN applied. This is accepted just fine by gcc. I chose this as preferable to editing the multiple copies of CMSIS headers where it is normally declared.
* the stub safe_mode reset simply aborts. This is used in mpy-cross.
2020-09-28 18:55:56 -05:00
b1e1237887
Merge branch 'main' into New_quirk_for_SH1107
2020-09-28 19:40:47 -04:00
f4e36fc7f6
CAN: Use mp_obj_t insteaed of canio_message_obj_t, get rid of rtr field
2020-09-28 17:22:00 -05:00
3e97e9c4be
canio: Listener: shuffle function declarations around
2020-09-28 17:22:00 -05:00
48bda589b8
Listerner: read -> receive, drop readinto
...
This prepares for creating a separate RemoteTransmissionRequest class
2020-09-28 17:22:00 -05:00
79ca430ddf
Match: address -> id
2020-09-28 17:22:00 -05:00
abdbbf9e24
One grep
2020-09-28 15:10:12 -07:00
128b4a013b
Add non-calibrated ADC
2020-09-28 12:11:08 -04:00
96323ac3ac
Default power on Wio Terminal's 40 Pin
2020-09-27 10:21:25 +08:00
791d20f16c
give qtpy haxpress its own USB PID
2020-09-26 11:45:53 -05:00
9944935fde
qtpy haxpress: enable RTC
2020-09-26 11:33:10 -05:00
22a7696fac
Changes take 2: missed ugame10 board
2020-09-25 22:17:59 -04:00
b921543571
Requested changes take 1
2020-09-25 21:27:29 -04:00
eadb4de144
qtpy_m0_haxpress: add
2020-09-24 16:58:24 -05:00
dd86cb00ad
Merge pull request #3448 from hierophect/esp32-sd-fix
...
ESP32S2 - Fix SPI's SD card issue, add pin protections
2020-09-23 12:30:01 -07:00
bcabf5e019
Merge pull request #3457 from ladyada/qtpy_m0
...
fix pins for rev C
2020-09-23 11:31:28 -07:00
00517b2600
Move missing pin warning to shared-bindings
2020-09-23 11:39:39 -04:00
9db7625717
neopix is default on!
2020-09-23 11:19:01 -04:00
5384479a61
fix pins for rev C
2020-09-22 23:28:23 -04:00
98185e914b
Merge pull request #3425 from jepler/canbus
...
canio: Initial implementation for SAM E5x MCUs
2020-09-22 12:39:52 -07:00
59580d0f2d
canio: Fix implementation bugs in atmel-sam
2020-09-22 09:36:29 -05:00
add230b4da
Update port.c
2020-09-22 11:37:12 +05:30
4869dbdc67
canio: rename from _canio
...
This reflects our belief that the API is stable enough to avoid incompatible changes during 6.x.
2020-09-21 16:44:26 -05:00
9e8f1820c8
canio.CAN: switch rx/tx, make both mandatory, move declarations around
2020-09-21 16:44:26 -05:00
4e4853dcb2
common.template.ld: remove unneeded line
2020-09-21 16:44:26 -05:00
df379b84cb
remove unneeded symbols
2020-09-21 16:44:26 -05:00
7fd6cab2ac
canio: Make both tx and rx (but not both) optional
...
.. loopback and silent come from the (optional) constructor parameters
not guessing based on the pin specification
.. docstring & comment improvements
2020-09-21 16:44:26 -05:00
09f8a83a75
samd: template.ld: put canram in its own output section
2020-09-21 16:44:26 -05:00
a76119afcb
add _canio to Feather M4 CAN
2020-09-21 16:44:26 -05:00
67d8f108bb
Add CAN to SAM E51 clock config
2020-09-21 16:44:26 -05:00
44c5b2bbb1
Respond to review comments
...
Thanks @tannewt!
2020-09-21 16:44:26 -05:00
58b920ed97
fix whitespace
2020-09-21 16:44:26 -05:00
27cbb690e5
_canio: Add listener matching
...
Lightly tested:
* no matches (catch-all)
* standard address single address matches (even and odd positions)
* standard address mask matches
* only tested that extended doesn't match non-extended
2020-09-21 16:44:26 -05:00
635fcadb59
_canio.CAN: add error handling & bus state
2020-09-21 16:44:26 -05:00
a2e1867f69
_canio: Minimal implementation for SAM E5x MCUs
...
Tested & working:
* Send standard packets
* Receive standard packets (1 FIFO, no filter)
Interoperation between SAM E54 Xplained running this tree and
MicroPython running on STM32F405 Feather with an external
transceiver was also tested.
Many other aspects of a full implementation are not yet present,
such as error detection and recovery.
2020-09-21 16:44:26 -05:00
183649aad8
samd: move mcu_find_pin_function to header
...
.. it'll be used in can as well as sdio
2020-09-21 16:44:07 -05:00
22d9a94f2b
Use write_value, add missing pin exceptions
2020-09-21 13:47:14 -04:00
c963771b4b
Merge pull request #3445 from microDev1/boardInfo
...
Update microS2 config files
2020-09-21 10:33:38 -07:00
40ec7a66e4
Update microS2 config files
2020-09-21 14:39:31 +05:30
ce266425e1
Merge pull request #3441 from hierophect/stm32-rgbmatrix-crashfix
...
STM32: Add never_reset reservation to RGBMatrix init
2020-09-20 07:51:09 -05:00
9cc803eb95
Merge pull request #3432 from bd34n/rename-bdmicro-vina-m0-d21
...
Rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles.
2020-09-19 13:41:21 -04:00
b28b31196d
Merge pull request #3438 from nitz/patch-1
...
[Makerdiary nRF52840 M.2 Devkit] Add SDA & SDL, RX & TX to pins.c
2020-09-18 21:51:22 -04:00
dfd09bba57
Merge pull request #3433 from astrobokonon/esp32s2-bssid
...
ESP32S2: Allow connecting to specific bssid
2020-09-18 21:31:15 -04:00
8cf0171c06
Merge pull request #3431 from hierophect/stm32-spi-writevalue
...
STM32: Change SPI Read to acknowledge write_value
2020-09-18 19:46:21 -04:00
5116375604
Merge pull request #3436 from jepler/fix-spi-sercom4
...
samd: SPI: improve conditional code
2020-09-18 19:14:39 -04:00
23dd7c7c96
Merge pull request #3435 from jepler/fix-sdhc1
...
sdioio: fix code for the case where there is no SDHC1
2020-09-18 17:10:59 -04:00
8d6a28a9ff
Update user button names.
2020-09-18 17:01:44 -04:00
550b42e4d3
Merge pull request #3434 from jepler/same54-disable-cpu-voltage
...
sam e54: disable microcontroller.cpu.voltage
2020-09-18 15:20:43 -04:00
5249a228a0
More pin names cleanup.
2020-09-18 14:27:00 -04:00
3a59d30e1a
Remove timer debug messages
2020-09-18 12:48:15 -04:00
c58bd4c047
Add never_reset reservation to RGBMatrix init
2020-09-18 12:38:15 -04:00
db078922e4
Removed TXD/RXD, fixed whitespace.
2020-09-17 21:32:19 -04:00
be3e478fce
Add SDA & SDL, RX & TX to pins.c
...
Despite the [silk on the dock board](https://wiki.makerdiary.com/nrf52840-m2-devkit/resources/nrf52840_m2_devkit_hw_diagram_v1_0.pdf ), the SDA/SCL pins weren't defined. Though, they were already defined in `mpconfigboard.h`.
Same for RX/TX. It looks like it declared `TXD` and `RXD`, so I didn't want to remove those, but I think it makes sense to have the "standard" pin names, but I moved ithem to illustrate they were all referencing the same pins.
I mimicked the whitespace I saw in the metro_nrf52840_express port.
2020-09-17 20:46:59 -04:00
45eec5b5a5
samd: SPI: improve conditional code
...
I recently misdiagnosed a "maybe-uninitialized" diagnostic as a bug in
asf4. However, the problem was in our SPI code.
A special case for samr21 MCUs was being applied to same54p20a and possibly
other D5x/E5x MCUs, since the check was simply for pin PC19 existing at all.
Change the check to use the macro PIN_PC19F_SERCOM4_PAD0 which is only
defined if special function F of pin PC19 is SERCOM4 PAD0.
Reorganize the code a little bit so that brace-matching in editors is
not confused by the conditionalized code, including an unrelated change
for APA102_SCK's condition.
Revert the change to the Makefile that incorrectly attempted to silence
the diagnostic.
2020-09-17 18:30:22 -05:00
c73182803d
sdioio: fix code for the case where there is no SDHC1
...
.. it doesn't really make a difference (the old code created an empty
else{} statement) but this is more correct.
2020-09-17 18:29:31 -05:00
1b29ceaf1a
sam e54: disable microcontroller.cpu.voltage
...
This hangs, and the usual workarounds didn't work.
2020-09-17 18:27:43 -05:00
17bdc969db
Reorganize sdkconfigs and release UF2s
2020-09-17 16:01:23 -07:00
1805e92038
Add else case for non-bssid usage
2020-09-17 15:04:27 -07:00
7f60ebd6c7
Merge pull request #3426 from tannewt/esp_flash_sizes
...
Add partition layouts for 8 and 16 MB as well.
2020-09-17 13:27:58 -07:00
4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid
...
Automate USB VID/PID Uniqueness Check
2020-09-17 11:48:46 -07:00
9cf9441ba6
Merge pull request #3393 from tannewt/fix_spi_psram
...
Add non-DMA SPI support.
2020-09-17 11:11:56 -07:00
78338ac12b
Merge pull request #3417 from hierophect/esp32s2-readme
...
ESP32S2: Add Readme
2020-09-17 10:58:17 -07:00
1e3241ec6d
Merge branch 'main' into esp32s2-bssid
2020-09-16 17:15:01 -07:00
daa1dd278d
connect now accepts bssid
2020-09-16 16:25:17 -07:00
81ee874531
pins.c: fix trailing whitespace
2020-09-16 16:40:04 -04:00
847d609ddc
rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles appropriately
2020-09-16 16:27:24 -04:00
c55deb54f0
Merge pull request #3427 from usini/muselab_nanoesp32_s2
...
Added board - Muselab nanoESP32-S2
2020-09-16 12:23:41 -07:00
00ee94d24b
Add SPI memset, optional flags
2020-09-16 14:22:18 -04:00
fb90daa0ff
Merge pull request #3422 from askpatrickw/rtc-support
...
RTC enabled
2020-09-16 11:12:00 -07:00
18285f96e8
RTC is pickd up automatically
2020-09-16 10:13:07 -07:00
d774678a0f
Merge pull request #3369 from kamtom480/camera
...
Add camera module
2020-09-16 12:29:58 -04:00
478a4b6405
Clarify location of port root
2020-09-16 10:51:08 -04:00
1fc797132a
Merge pull request #3237 from DavePutz/issue3216
...
Issue#3216 - Needed an alternate way to check if background tasks were run
2020-09-16 08:47:33 -05:00
61687c81d8
camera: Pass width and height to take_picture()
2020-09-16 13:55:57 +02:00
c06aeda399
Add Muselab nanoesp32 s2 definition
2020-09-16 13:10:01 +02:00
fead60d2d8
Add BSSID to Network
2020-09-15 23:32:53 -07:00
2bd169ec32
Add partition layouts for 8 and 16 MB as well.
2020-09-15 18:12:06 -07:00
95e27bb8bf
Add more PIDs for unique boards
2020-09-15 13:43:35 -07:00
bd381e434f
Revert "code review feedback"
...
This reverts commit f9f614b3a2
2020-09-15 13:02:26 -07:00
f9f614b3a2
code review feedback
2020-09-15 11:28:31 -07:00
8fcdc7da16
RTC enabled
2020-09-14 23:24:44 -07:00
3c6af94fb3
Merge pull request #3384 from jepler/feather_m4_can
...
atmel-samd: add same51, feather_m4_can
2020-09-14 23:57:51 -04:00
067a975875
update submodules to merge commits
2020-09-14 17:22:30 -05:00
2a2a8d6457
Merge pull request #28 from adafruit/main
...
Merge from adafruit/main
2020-09-14 16:50:40 -05:00
3640ef2b7f
Fix toctree, incorrect flash port assumptions
2020-09-14 17:37:55 -04:00
6ecfdda580
Add Readme
2020-09-14 13:18:51 -04:00
2eca4ee902
Update PulseIn.c
2020-09-14 11:04:45 -05:00
e504438fd2
Remove unlicensed file, fix reset pin type check
2020-09-14 11:58:13 -04:00
c014ac3089
Reworked check for input taking too long
2020-09-14 10:54:57 -05:00
ecc219fe50
Merge remote-tracking branch 'upstream/main' into esp32-displayio-fix
2020-09-14 10:44:31 -04:00
ce7ee58e92
camera: Update camera module
2020-09-14 13:12:20 +02:00
c2fc592c2c
camera: Change API
2020-09-14 13:11:15 +02:00
143a1ff94a
spresense: change the GC to do 32-byte blocks
2020-09-14 13:11:15 +02:00
1fde8ef9bc
spresense: Add support for camera
2020-09-14 13:11:15 +02:00
Jeff Epler
Jeff Epler
microDev
mdroberts1243
Scott Shawcroft
Lucian Copeland
Anson He
Scott Shawcroft
lady ada
Dan Halbert
nitz
Ryan T. Hamilton
Ryan T. Hamilton
Brian Dean
askpatricw
Kamil Tomaszewski
Rémi Sarrailh
DavePutz