Commit Graph

11 Commits

Author SHA1 Message Date
Dan Halbert 57c33059f3 board_deinit() everywhere 2021-11-30 11:00:10 -05:00
Neradoc 8625e53817 change board dicts to include a common macro with __name__ 2021-09-03 21:03:55 +02:00
Neradoc 4d05bb26bf change board.ID to board.board_id 2021-08-26 23:11:55 +02:00
Neradoc b14b294516 add board.ID 2021-08-26 23:11:55 +02:00
Scott Shawcroft ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset
Now we use never_reset which is generally more correct and easier
to get right.

Fixes #5001 and fixes #4997
2021-07-15 16:20:04 -07:00
microDev a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
Jeff Epler f1ada8e880 Automatically count EXTERNAL_FLASH_DEVICES 2021-03-07 11:48:39 -06:00
Scott Shawcroft 40118bcf57
Add `board_deinit` for use with sleep
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)

Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.

Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.

ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.

Fixes #3786
2020-12-08 10:52:25 -08:00
Jeff Epler a2e1867f69 _canio: Minimal implementation for SAM E5x MCUs
Tested & working:

 * Send standard packets
 * Receive standard packets (1 FIFO, no filter)

Interoperation between SAM E54 Xplained running this tree and
MicroPython running on STM32F405 Feather with an external
transceiver was also tested.

Many other aspects of a full implementation are not yet present,
such as error detection and recovery.
2020-09-21 16:44:26 -05:00
Jeff Epler f496c0b58d atmel-samd: Add SDIO SD card interface 2020-06-26 11:50:42 -05:00
Jeff Epler d5074220a8 atmel-samd: Add SAM E54 Xplained board
Few peripherals are actually tested.  However, USB, I2C and GPIO seem to work.

Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.

The default SPI, I2C, and UART are the ones on the EXT2 header.  This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
2020-06-23 10:41:48 -05:00