Commit Graph

52 Commits

Author SHA1 Message Date
Dan Halbert 57c33059f3 board_deinit() everywhere 2021-11-30 11:00:10 -05:00
Neradoc 8625e53817 change board dicts to include a common macro with __name__ 2021-09-03 21:03:55 +02:00
Neradoc 4d05bb26bf change board.ID to board.board_id 2021-08-26 23:11:55 +02:00
Neradoc b14b294516 add board.ID 2021-08-26 23:11:55 +02:00
Scott Shawcroft ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset
Now we use never_reset which is generally more correct and easier
to get right.

Fixes #5001 and fixes #4997
2021-07-15 16:20:04 -07:00
Scott Shawcroft 5c33c9d597
Fix SAMD
RTC needed to wait for sync. NeoPixel on SAMD doesn't need disabled
caches. It just needed timing adjustment for 120mhz clock speed.
2021-05-14 16:14:24 -07:00
Kattni Rembor 294ef59f27 Add LED pin to Adafruit boards. 2021-05-10 16:39:01 -04:00
Dan Halbert c37f021791 regularize and shrink many builds 2021-05-05 12:35:41 -04:00
Jeff Epler f1ada8e880 Automatically count EXTERNAL_FLASH_DEVICES 2021-03-07 11:48:39 -06:00
James Bowman 0dabd1ace2 Add EVE support for Feather M4 Express 2021-03-01 14:42:48 -08:00
Scott Shawcroft 40118bcf57
Add `board_deinit` for use with sleep
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)

Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.

Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.

ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.

Fixes #3786
2020-12-08 10:52:25 -08:00
Jeff Epler cacb0124ac feather_m4_express: Use quad data mode on flash
Limor confirmed that the all shipping revisions starting with Rev D had QSPI flash chips installed.

Note that when neither EXTERNAL_FLASH_QSPI_SINGLE nor EXTERNAL_FLASH_QSPI_DUAL is specified quad mode is assumed, so this is addressed by removing the setting altogether.
2020-09-10 20:20:21 -05:00
Diego Elio Pettenò dd5d7c86d2 Fix up end of file and trailing whitespace.
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
warriorofwire 206d0e598a Add vectorio: for drawing shapes
vectorio builds on m4 express feather

Concrete shapes are composed into a VectorShape which is put into a displayio Group for display.

VectorShape provides transpose and x/y positioning for shape implementations.

Included Shapes:

* Circle
  - A radius; Circle is positioned at its axis in the VectorShape.
  - You can freely modify the radius to grow and shrink the circle in-place.

* Polygon
  - An ordered list of points.
  - Beteween each successive point an edge is inferred.  A final edge closing the shape is inferred between the last
    point and the first point.
  - You can modify the points in a Polygon.  The points' coordinate system is relative to (0, 0) so if you'd like a
      top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape
      x and y properties will position the rectangle relative to its top center point

* Rectangle
  A width and a height.
2020-05-09 15:38:22 -07:00
scs217 50e718be99 second revision to line breaks for visibility per dhalbert 2020-01-13 22:13:39 -05:00
scs217 18957786f2 inserted line breaks between different pins (grouping together aliases for legibility) per request by dhalbert 2020-01-13 22:00:42 -05:00
scs217 c735289ddf Added Dxx names to analog pins on Feather M4 Express pins.c file 2020-01-13 21:19:17 -05:00
Dan Halbert 40434d6919 wip 2019-12-05 22:45:53 -05:00
Dan Halbert 228a619af5 enable network, wiznet5k, and ps2io by default on M4 2019-11-22 10:59:27 -05:00
Dan Halbert 7b79ac3739 Parameterize linker script 2019-10-20 23:50:12 -04:00
Dan Halbert e2a4c76a37 make nrf touchio be generic: now available for SAMD51 too 2019-08-18 08:44:10 -04:00
Dan Halbert 1bb4fccc3b Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files 2019-06-12 11:08:22 -04:00
Elvis Pfützenreuter 1da8d4b4da Add PS/2 support -- ps2io module 2019-06-04 18:05:46 -03:00
Scott Shawcroft 0f003ac5b8
Reorganize board busses into shared-bindings and shared-module. 2019-04-08 16:58:50 -07:00
Dan Halbert 5154e0581e WIP: atmel-samd trinket build works 2019-02-15 00:28:20 -05:00
Scott Shawcroft ae52c964c2
Cleanup display rework for PR.
Fixes #1465. Fixes #1337. Fixes #1168
2019-01-18 13:47:40 -08:00
Scott Shawcroft 05d8885a1a
Rework displays in prep for dynamic support and 8bit parallel. 2019-01-16 12:05:20 -08:00
Scott Shawcroft 6ef8639971
Rework safe mode and have heap overwrite trigger it.
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.

The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.

A couple NeoPixel fixes are included for the nRF52 as well.

Fixes #1034. Fixes #990. Fixes #615.
2018-12-06 14:24:20 -08:00
Scott Shawcroft 9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.

Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
Nick Moore f6482699a0 Merge remote-tracking branch 'origin/master' into circuitpython/nickzoic/703-wiznet-5500-native 2018-10-25 12:20:50 +11:00
Paul Sajna 1447df3fa6 change BAT to BATTERY 2018-10-14 23:34:49 -07:00
Paul Sajna f1028b5f96 add pin def for BAT 2018-10-13 15:53:22 -07:00
Nick Moore 8d75c3d339 Changed to only build wiznet for {feather|metro}_m[04]_express 2018-10-11 13:42:26 +11:00
Noralf Trønnes 11cbeb87ad ports/atmel-samd: Implement i2cslave.I2CSlave
This adds support for SAMD acting as a I2C slave in polled mode.
2018-08-16 17:20:49 +02:00
Scott Shawcroft 769788d3c7 Turn off USB pin objects since they are always used for USB. 2018-06-08 12:56:32 -07:00
Kattni Rembor ba7e0e2f86 Add Adafruit to other M4 board name strings 2018-06-07 13:39:04 -04:00
Dan Halbert 7e7e33e460 add PA14 as D4 to Feather M4 Exprses 2018-06-05 08:15:34 -04:00
Scott Shawcroft fd71e56891 atmel-samd: Re-org helper peripheral files into their own subdirectory.
Ideally in the future they won't depend on ASF4 or MicroPython.
2018-06-01 15:07:31 -07:00
Noralf Trønnes e158702a68 atmel-samd/samd51: Use crystal for RTC
This uses the crystal to clock the RTC on boards which have a crystal.

Disable clock generator 2 which was enabled in commit
8e2080411f ("atmel-samd: Add rtc module support").
samd51 differs from samd21 when it comes to the RTC clock. samd51 doesn't
have an explicit clock peripheral so no need for a clock generator.

The same commit didn't even setup XOSC32K correctly, it missed EN1K and XTALEN.

The RTC uses the 1k clock output, so enable it on the OSCULP32K even if it works without it.
2018-06-01 18:03:23 +02:00
Dan Halbert eab8e43188 rev E feather M4 express; remove named AREF pins 2018-05-29 20:25:28 -04:00
Dan Halbert 45db48bbaa make longint choice mechanism more readable 2018-05-22 08:04:14 -04:00
Dan Halbert 5680933483 refactor longint settings; make crickit cpx build 2018-05-21 23:58:03 -04:00
Matt Land 173a0a5faa arduino, circuitplayground, feather boards 2018-05-17 13:42:08 -04:00
Matt Land de885e81b1 Merge branch 'feature-i2c-gemma' into feature-default-spi-circuit-playground 2018-05-16 16:07:55 -04:00
Matt Land 8a351595ef formatting, trailing newlines 2018-05-16 15:57:25 -04:00
Matt Land 2c067edf54 used pins.c instead of README.rst 2018-05-16 15:54:01 -04:00
Matt Land 3144654854 SPI for all boards 2018-05-16 15:36:36 -04:00
Matt Land 244866c2c3 spi on much 2018-05-16 15:25:24 -04:00
Scott Shawcroft 812fe0c93f Turn on nvm in 3.0.
Its 256b on M0 and 8k on M4 to match flash erase sizes.

Fixes #758
2018-04-13 16:22:28 -07:00
Scott Shawcroft 28642ab10d Add audio output support!
This evolves the API from 2.x (and breaks it). Playback devices are now
separate from the samples themselves. This allows for greater playback
flexibility. Two sample sources are audioio.RawSample and audioio.WaveFile.
They can both be mono or stereo. They can be output to audioio.AudioOut or
audiobusio.I2SOut.

Internally, the dma tracking has changed from a TC counting block transfers
to an interrupt generated by the block event sent to the EVSYS. This reduces
the overhead of each DMA transfer so multiple can occure without using up TCs.

Fixes #652. Fixes #522. Huge progress on #263
2018-04-12 16:35:13 -07:00