Glenn Ruben Bakke
|
d7cfae3639
|
nrf5/usocket: Removing network modules related to Bluetooth 6lowpan implementation as it depends on SDK libraries for now. Will be moved to seperate working branch.
|
2017-04-09 18:53:58 +02:00 |
|
Glenn Ruben Bakke
|
4dd86178bc
|
nrf5: Removing custom display, framebuffer and graphics module to make branch contain core components instead of playground modules.
|
2017-04-09 18:25:15 +02:00 |
|
Glenn Ruben Bakke
|
3b2ca64738
|
nrf5/boards: Remove define of machine PWM module configuration in nrf51 targets, as the device does not have a HW PWM peripheral.
|
2017-03-07 18:05:38 +01:00 |
|
Glenn Ruben Bakke
|
9689aae45b
|
nrf5/boards: Disable all display modules in pca10028 board config.
|
2017-03-07 18:01:13 +01:00 |
|
Bander Ajba
|
378c40b4da
|
did required modification to merge the temperature sensore module
|
2017-02-26 11:14:17 +03:00 |
|
Bander Ajba
|
3882b0e2ff
|
added support for hardware temperature sensor
|
2017-02-24 00:38:08 +03:00 |
|
Glenn Ruben Bakke
|
4cbdbc9a4b
|
nrf5: Renaming configuration define in board configs using i2c from MICROPY_PY_MACHINE_HW_I2C to MICROPY_PY_MACHINE_I2C as the config is overlapping with the latter.
|
2017-02-02 18:41:44 +01:00 |
|
Glenn Ruben Bakke
|
9009ad67b0
|
nrf5/boards: Updating boards to comply to new style of configuring pins for uart and spi.
|
2017-01-26 22:29:58 +01:00 |
|
Glenn Ruben Bakke
|
e40c385c6a
|
nrf5: Syncing code after upmerge with master.
|
2017-01-22 22:18:44 +01:00 |
|
Glenn Ruben Bakke
|
00a59ed8d6
|
nrf5/boards: Enable ssd1305 oled display to be default for pca10028 for now.
|
2017-01-16 23:39:50 +01:00 |
|
Glenn Ruben Bakke
|
7edea7848d
|
nrf51/boards: Enable display driver and oled ssd1306 (also bringing in framebuffer and graphics module) into the pca10028 target.
|
2017-01-15 19:34:52 +01:00 |
|
Glenn Ruben Bakke
|
a5bb966614
|
nrf5/boards: Updating pca10028 (nrf51) board config. Enable SPI machine module. Enable flow control on UART. Correcting SPI CLK, MISO and MOSI pin assignments.
|
2017-01-12 19:54:07 +01:00 |
|
Glenn Ruben Bakke
|
a0b0e13785
|
nrf5/boards: Enable ADC machine module for pca10028, pca10040 and pca10056.
|
2017-01-11 17:28:38 +01:00 |
|
Glenn Ruben Bakke
|
383db817f9
|
nrf5/boards: Enable hardware I2C machine module for pca10028 (nrf51), pca10040 (nrf52832) and pca10056 (nrf52840) boards.
|
2017-01-11 16:54:00 +01:00 |
|
Glenn Ruben Bakke
|
6973c13608
|
nrf5/boards: Updating all board configs with gpio port configuration for uart/spi pins. Leds still not defined by gpio port.
|
2017-01-08 16:04:52 +01:00 |
|
Glenn Ruben Bakke
|
4b6a12a251
|
nrf5/boards: Updating pca10028 board config to not define RTS/CTS pins when HWFC is set to 0.
|
2017-01-03 16:57:05 +01:00 |
|
Glenn Ruben Bakke
|
46ddf2ed70
|
nrf5/boards: Enable MICROPY_PY_MACHINE_RTC in pca10028 (nrf51) and pca10040 (nrf52) targets.
|
2016-12-26 16:50:59 +01:00 |
|
Glenn Ruben Bakke
|
8e7f9d7c38
|
nrf5/boards: Enable MICROPY_PY_MACHINE_TIMER in pca10028 (nrf51) and pca10040 (nrf52) targets.
|
2016-12-26 16:18:16 +01:00 |
|
Glenn Ruben Bakke
|
275bf46831
|
nrf51: Disable MICROPY_PY_MACHINE_PWM for now in all nrf51 target boards as sw impl. is not yet included in the repo.
|
2016-12-17 01:19:44 +01:00 |
|
Glenn Ruben Bakke
|
d7dc0b789d
|
nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).
|
2016-12-13 20:27:26 +01:00 |
|
Glenn Ruben Bakke
|
70956ea969
|
Base support for nrf51 and nrf52 base without depending on SDK. SoftDevice usage optional.
|
2016-11-16 21:38:25 +01:00 |
|