19c6c96929
Merge pull request #2130 from jepler/nrf-debugflags
...
nrf: Makefile: sensible flags for debugging
2019-09-20 10:18:00 -07:00
b5a9ed3688
Merge pull request #2161 from jepler/nrf-analog-reference
...
nRF: Change analog reference voltage
2019-09-17 09:41:52 -07:00
d39c85e3f5
nRF: Change analog reference to VCC(/4)
...
@ladyada says:
"having this be adjustable (reference) would be ideal cause you can get
absolute voltages but for now, VCC/4 + 4x matches every other chip :)"
... and indeed doing it this way happens to give a much more steady
reading when using a VCC-referenced resistance, and so many of the simple
things you'd wire up are actually VCC-referenced anyway.
2019-09-16 21:43:07 -05:00
c56186da8c
nRF: Change analog reference voltage
...
Datasheet reading explains one reason why readings might have been 10% low.
2019-09-16 18:35:48 -05:00
df48312ce7
nRF: PWMOut: At deinit, make pin available again
...
Closes : #2146
2019-09-11 20:09:38 -05:00
7b9dfc9952
nrf: i2s: tune audio buffering
...
.. based on some tasks I found that caused stuttering:
# Test SD and printing
while True: os.listdir('.')
# Test bulk I/O
while True: len(open('somefile.wav', 'rb').read())
Each of these tasks *WAS* worse and I am improving them in a separate
PR by adding RUN_BACKGROUND_TASKS to them.
2019-09-09 20:13:12 -05:00
c66f5a8536
nrf: i2s: rewrite without 'goto'
2019-09-09 19:26:18 -05:00
fe9605a6a3
nrf: i2s: Comment this slightly tricksy code
2019-09-09 19:25:52 -05:00
ccf08aa3df
nrf: I2SOut: deal more gracefully with errors from the sample
2019-09-08 21:59:07 -05:00
e890bc8efe
nrf: Makefile: sensible flags for debugging
...
This enables the highest level of debug symbols, and all optimizations
except lto that do NOT interfere with debugging, in the view of the gcc
maintainers.
2019-09-08 21:07:00 -05:00
f38ee42874
nrf: Add i2s audio output
...
Testing performed: I used a Particle Xenon with a HDA1334 I2S DAC.
I played a variety of mono 16-bit samples at 11025 and 22050Hz nominal
bit rates. With this setup, all the 11025Hz samples sound good.
I tested play, pause, and loop functionality.
During some runs with 22050Hz samples, there were glitches. However,
these may have only occurred during runs where I had set breakpoints
and watchpoints in gdb.
I also tested with a MAX98357A I2S amplifier. On this device, everything
sounded "scratchy". I was powering it from 5V and the 5V rail seemed
steady, so I don't have an explanation for this. However, I haven't
tried it with a SAMD board.
2019-09-08 16:46:35 -05:00
3c22c690c8
CPB A1 pin mapping wrong; remove A7
2019-09-06 14:17:11 -04:00
b1c3d47413
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-09-01 21:16:12 -05:00
8120f5cdad
Merge branch 'master' of https://github.com/adafruit/circuitpython into mixer_voice
2019-08-29 22:14:53 -05:00
7a64af9280
rename bleio module to _bleio
2019-08-29 18:44:27 -04:00
b11b7916fd
address minor issues: typos, make translate, and sphinx
2019-08-29 17:58:21 -04:00
f17059b10b
another API rework: less abstraction leakage
2019-08-28 23:15:22 -04:00
19c59b41ed
bleio: API change to create and connect related objects simulatenously: no orphan bleio objects
2019-08-28 16:15:09 -04:00
a72bcab0fd
Merge remote-tracking branch 'adafruit/master' into bleio-api-revamp
2019-08-28 16:09:18 -04:00
0364f1dc85
remove some debugging prints
2019-08-26 08:17:59 -04:00
76446f634b
BLE HID WIP: works everywhere except iOS; fixed a bunch of bugs; pretend bonding
2019-08-25 21:38:13 -04:00
2e4b687ba5
enable audiomixer on nrf
2019-08-25 07:32:48 -05:00
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
2497cbe186
Fix nrf builds
2019-08-22 14:23:33 -07:00
36a23e0fe3
Rework refresh API and factor common display stuff out
...
NOT TESTED! Just compiles
Fixes #1691
2019-08-22 14:23:27 -07:00
c247e7df9c
Begin refresh rework.
2019-08-22 14:08:33 -07:00
d37dd4d758
Updated ParallelBus implementation in nrf port
2019-08-22 14:08:33 -07:00
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
0b7291d767
fix default crystal value; fix include order
2019-08-22 09:01:05 -04:00
acc6df4959
merge similar fix in
2019-08-22 01:29:34 -04:00
d94023e9b3
Fix CPBlue LFCLKSRC; CPB has no status neopixel
2019-08-22 01:04:00 -04:00
389e7cc35d
Merge pull request #2072 from bmeisels/nrf-no-crystal-support
...
Add support for nrf boards that don't have an external crystal
2019-08-21 13:01:26 -07:00
fe2ec6c887
Add support for nrf boards that don't have an external crystal
2019-08-20 23:30:21 +03:00
e00696de7f
merge from upstream and make translate
2019-08-20 13:06:23 -04:00
44b28d1187
update tinyusb to 00c440cb
2019-08-19 19:42:45 -04:00
e3dc5e3a66
Merge remote-tracking branch 'adafruit/master' into run-background-tasks
...
Restore dependencies indicated by indentation in circuitpy_mpconfig.h.
2019-08-19 12:41:20 -04:00
26a05d01dc
Merge remote-tracking branch 'origin/master' into nrf-pdm-audioin
2019-08-18 21:30:14 -05:00
912fd7759d
nrf: PDMIn: Implement
...
So far, this supports only 16kHz and 16-bit samples with a fixed gain.
This is enough to support the basic functionality of e.g., sensing
ambient audio levels.
2019-08-18 15:58:04 -05:00
79f8a85786
nrf: stub out audiobusio.PDMIn, audiobusio.I2SOut
2019-08-18 15:55:57 -05:00
3f7321af00
Merge pull request #2031 from jepler/nrf-lto
...
Enable link-time optimization for nrf targets
2019-08-18 12:35:26 -04:00
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
85d7398476
Merge pull request #2066 from dhalbert/ble-pairing
...
BLE: more features
2019-08-16 14:50:00 -07:00
630c92392a
address review comments; avoid calling common_hal_bleio_device... routines from shared-bindings
2019-08-16 15:18:53 -04:00
5877bd6036
CPblue initial definition
2019-08-13 22:12:36 -04:00
11dd3a260e
nrf: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
1570ef2dd4
specifying attribute length; fix up value setting
2019-08-07 23:49:09 -04:00
d047b73a9c
fix newly-introduced bugs; UART client/server working again
2019-08-07 11:10:21 -04:00
d74c8b9425
WIP: more Descriptor work; refactor gattc/gatts read/write
2019-08-06 22:55:25 -04:00
243334da75
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 23:06:24 -04:00
59efce3035
Merge pull request #2039 from dhalbert/metro-52840
...
Metro nRF52840 rev A defn; remove '#define FEATHER52840' from mpconfigboard.h
2019-08-05 18:48:36 -07:00
Scott Shawcroft
jepler
Dan Halbert
sommersoft
Scott Shawcroft
Benny Meisels
Dan Halbert