Commit Graph

13 Commits

Author SHA1 Message Date
iabdalkader 43079aaf86 drivers/ninaw10: Add ublox Nina-W10 WiFi/BT module driver.
- Add WiFi/BT drivers for ublox Nina-W10 (esp32 based) module.
- Add ublox Nina-W10 Python module in extmod.
2021-11-13 23:01:03 +11:00
Philipp Ebensberger 0d7366c912 mimxrt: Rework flash configuration.
- Moves definition of BOARD_FLASH_SIZE and other header files related to
	flash configuration into the Makefile.
- Adds board specific clock_config.h.
- Adds board.h, pin_mux.h, and peripherals.h as they are
	required by NXP MCU SDK in order to use our own clock_config.h.
- Renames board specific FlexSPI configuration files.
- Updates flash frequency of MIMXRT1020_EVK
- Creates separated flash_config files for QSPI NOR and
	QSPI Hyper flash.
- Unifies VFS start address to be @ 1M for 1010 and 1020 boards.
- Unifies 1050EVK boards
- Adds support to both NOR and HyperFlash on boards with
	both capabilities.
- Adds automatic FlexRAM initialization to start-up code based on
	linker script and NXP HAL.
- Applies code formatting to all files in mimxrt port.

With this change the flash configuration is restructured and
organized. This simplifies the configuration process and
provides a better overview of each board's settings. With the integration
of clock_config.h, board.h, pin_mux.h, and peripherals.h we gain better
control of the settings and clock configurations. Furthermore the
implementation of an explicit FlexRAM setup improves the system
performance and allows for performance tuning.

Signed-off-by: Philipp Ebensberger
2021-09-14 13:52:52 +02:00
Glenn Ruben Bakke 85f0ce214e tools/codeformat.py: Include ports/nrf/modules/nrf in code formatting. 2021-08-08 23:17:55 +10:00
Damien George 136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Thorsten von Eicken 3e758ef235 lib/mbedtls_errors: Add code to patch mbedtls for shortened error strs.
The file `mbedtls_errors/mp_mbedtls_errors.c` can be used instead of
`mbedtls/library/error.c` to give shorter error strings, reducing the build
size of the error strings from about 12-16kB down to about 2-5kB.
2020-07-20 23:53:27 +10:00
Damien George 026fda605e tools/codeformat.py: Include extmod/{btstack,nimble} in code formatting.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-18 22:20:20 +10:00
David Lechner ecd7826316 tools/codeformat.py: Remove sizeof fixup.
Formatting for `* sizeof` was fixed in uncrustify v0.71, so we no longer
need the fixups for it.  Also, there was one file where the updated
uncrustify caught a problem that the regex didn't pick up, which is updated
in this commit.

Signed-off-by: David Lechner <david@pybricks.com>
2020-06-14 20:24:18 +10:00
David Lechner 8f642677f7 tools/codeformat.py: Add verbose option to pass to uncrustify and black.
This adds a new command line option `-v` to `tools/codeformat.py` to enable
verbose printing of all files that are scanned.

Normally `uncrustify` and `black` are called with the `-q` option so
setting verbose suppresses the `-q` option and on `black` also enables the
`-v` option which makes it print out all file names matching the filter
similar to how `uncrustify` does by default.
2020-05-29 22:59:56 +10:00
David Lechner 2d1fef7096 tools/codeformat.py: Use -q option on uncrustify to make output quiet.
This suppresses the Parsing: <file> as language C lines.  This makes
parsing run a bit faster and on CI it makes for less scrolling through logs
(and black already uses the -q option).
2020-05-28 10:08:38 +10:00
David Lechner 3dc324d3f1 tests: Format all Python code with black, except tests in basics subdir.
This adds the Python files in the tests/ directory to be formatted with
./tools/codeformat.py.  The basics/ subdirectory is excluded for now so we
aren't changing too much at once.

In a few places `# fmt: off`/`# fmt: on` was used where the code had
special formatting for readability or where the test was actually testing
the specific formatting.
2020-03-30 13:21:58 +11:00
stijn 1b3e0e10b9 tools/codeformat.py: Include all msvc C code in auto-format. 2020-03-25 00:36:42 +11:00
David Lechner 8a4ce6b79a tools/codeformat.py: Eliminate need for sizeof fixup.
This eliminates the need for the sizeof regex fixup by rearranging things a
bit.  All other bitfields already use the parentheses around expressions
with sizeof, so one case is fixed by following this convention.

VM_MAX_STATE_ON_STACK is the only remaining problem and it can be worked
around by changing the order of the operands.
2020-03-11 14:34:40 +11:00
Damien George 4b23e98fb0 tools/codeformat.py: Add formatter using uncrustify for C, black for Py.
This commit adds a tool, codeformat.py, which will reformat C and Python
code to fit a certain style.  By default the tool will reformat (almost)
all the original (ie not 3rd-party) .c, .h and .py files in this
repository.  Passing filenames on the command-line to codeformat.py will
reformat only those.  Reformatting is done in-place.

uncrustify is used for C reformatting, which is available for many
platforms and can be easily built from source, see
https://github.com/uncrustify/uncrustify.  The configuration for uncrustify
is also added in this commit and values are chosen to best match the
existing code style.  A small post-processing stage on .c and .h files is
done by codeformat.py (after running uncrustify) to fix up some minor
items:
- space inserted after * when used as multiplication with sizeof
- #if/ifdef/ifndef/elif/else/endif are dedented by one level when they are
  configuring if-blocks and case-blocks.

For Python code, the formatter used is black, which can be pip-installed;
see https://github.com/psf/black.  The defaults are used, except for line-
length which is set at 99 characters to match the "about 100" line-length
limit used in C code.

The formatting tools used and their configuration were chosen to strike a
balance between keeping existing style and not changing too many lines of
code, and enforcing a relatively strict style (especially for Python code).
This should help to keep the code consistent across everything, and reduce
cognitive load when writing new code to match the style.
2020-02-28 10:14:28 +11:00