9d3c0d423e
lib/oofatfs/ffconf.h: Add MICROPY_FATFS_NORTC option.
2017-01-31 19:54:20 +11:00
8e00844929
stmhal: Fix build issue when MICROPY_PY_THREAD is disabled.
2017-01-31 19:52:50 +11:00
00e7176624
stmhal/main: Use _estack value to initialise stack extents.
2017-01-31 18:43:46 +11:00
882ec01e42
stmhal: Initial implementation of multithreading, currently disabled.
...
This patch brings the _thread module to stmhal/pyboard. There is a very
simple round-robin thread scheduler, which is disabled if there is only
one thread (for efficiency when threading is not used).
The scheduler currently switches threads at a rate of 250Hz using the
systick timer and the pend-SV interrupt.
The GIL is disabled so one must be careful to use lock objects to prevent
concurrent access of objects.
The threading is disabled by default, one can enabled it with the config
option MICROPY_PY_THREAD to test it out.
2017-01-31 18:42:35 +11:00
bebb3a6160
tests/thread: Make thread_exc2 runable on baremetal.
2017-01-31 13:59:20 +11:00
a6386f74b8
stmhal/pendsv: Fill in comments about what the stack contains.
2017-01-31 13:58:34 +11:00
7d8c79ab6d
stmhal/main: Guard init_sdcard_fs with MICROPY_HW_HAS_SDCARD.
2017-01-31 13:04:32 +11:00
e0381424cc
stmhal/modmachine: Add machine.Signal type.
2017-01-31 12:36:20 +11:00
e24e03b415
stmhal/pin: Add C-level pin ioctl method.
2017-01-31 12:36:04 +11:00
b039d93d7e
lib/oofatfs/ffconf.h: Allow to configure FS_EXFAT option.
...
Using MICROPY_FATFS_EXFAT. Enabling this has licensing implications;
see https://www.microsoft.com/en-us/legal/intellectualproperty/mtl/exfat-licensing.aspx
2017-01-31 12:32:24 +11:00
80dfd65090
stmhal/main: Put /sd directory before /flash in sys.path.
...
If the SD card is mounted then its libraries (ie those that are imported)
should override any in /flash.
2017-01-31 12:30:18 +11:00
3667ee1b88
stmhal: On boot, mount all available partitions of the SD card.
...
The first partition is mounted as "/sd" and subsequent partitions are
mounted as "/sd<part_num>". This is backwards compatible with the previous
behaviour, which just mounted the first partition on "/sd".
At this point, only FatFs filesystems are mounted.
2017-01-31 12:18:08 +11:00
326343feeb
stmhal/README: Add paragraph about building mpy-cross.
2017-01-31 09:32:31 +11:00
5004a6f811
nrf5/hal: Updating twi master tx with stop parameter.
2017-01-30 23:05:27 +01:00
33b8e65bc0
tests/basics/zip: Make skippable.
2017-01-31 00:33:01 +03:00
aee723ed4c
tests/run-tests: Skip frozenset tests if set literal syntax is not available.
2017-01-31 00:25:09 +03:00
ed976e07fe
nrf5/hal: Adding i2c master functions for tx and rx in hal header.
2017-01-30 21:32:20 +01:00
d335904666
zephyr/Makefile.zephyr: Support and default to networked (SLIP) QEMU.
...
Also works for non-networked builds (like minimal).
2017-01-30 21:27:29 +03:00
10dbf2383f
extmod/vfs_fat.c: Use explicit include path for timeutils.h.
2017-01-30 23:10:16 +11:00
c30b308492
extmod/vfs_reader: Fix use of NLR by popping context.
2017-01-30 22:26:54 +11:00
5ec5bfb0d3
docs/pyboard/tutorial/lcd160cr_skin: Fix typo, get_touched->get_touch.
2017-01-30 18:19:29 +11:00
6b12934fec
stmhal: Fix stack pointer initialisation for F411 and F429 boards.
...
The stack pointer should start pointing 1 byte past the top of the end of
RAM.
2017-01-30 17:47:11 +11:00
a526352454
stmhal: Set the FatFs partition number when initialising VFS object.
...
stmhal has MULTI_PARTITION enabled for FatFs and so these values need to be
initialised.
2017-01-30 13:02:10 +11:00
220abca311
stmhal: Use LED constants from PYBv4 onwards.
2017-01-30 13:01:21 +11:00
30beed119f
unix/modos: Remove VfsFat from uos module, it's now in uos_vfs module.
2017-01-30 12:26:08 +11:00
0fb27888fc
extmod/vfs_fat: Remove unused function fat_vfs_listdir.
2017-01-30 12:26:08 +11:00
196406e17a
extmod/vfs_fat: Remove unused fatfs_builtin_open function.
2017-01-30 12:26:08 +11:00
b697c89009
extmod: Merge old fsusermount.h header into vfs.h and vfs_fat.h.
...
vfs.h is for generic VFS declarations, and vfs_fat.h is for VfsFat
specific things.
2017-01-30 12:26:08 +11:00
9425bf5b2b
lib/fatfs: Remove old fatfs library component, it's replaced by oofatfs.
2017-01-30 12:26:08 +11:00
0bd61d23b9
extmod/vfs_fat: Remove MICROPY_FATFS_OO config option.
...
Everyone should now be using the new ooFatFs library. The old one is no
longer supported and will be removed.
2017-01-30 12:26:07 +11:00
95635ade8b
unix/mpconfigport.h: Remove obsolete MICROPY_FATFS_VOLUMES config.
2017-01-30 12:26:07 +11:00
c95c583857
esp8266/mpconfigport.h: Remove obsolete MICROPY_FATFS_VOLUMES config.
2017-01-30 12:26:07 +11:00
1808b2e8d5
extmod: Remove MICROPY_FSUSERMOUNT and related files.
...
Replaced by MICROPY_VFS and the VFS sub-system.
2017-01-30 12:26:07 +11:00
3d6f957208
extmod/vfs_fat: Remove MICROPY_FSUSERMOUNT_ADHOC config option.
2017-01-30 12:26:07 +11:00
8beba7310f
extmod/vfs_fat: Remove MICROPY_READER_FATFS component.
2017-01-30 12:26:07 +11:00
56506fd64a
cc3200: Convert to use new VFS sub-system and new ooFatFs library.
2017-01-30 12:26:07 +11:00
6eafa54486
extmod/vfs: Expose lookup_path_raw as mp_vfs_lookup_path.
...
It can be useful for low-level lookup of paths by ports.
2017-01-30 12:18:35 +11:00
ec3274324b
extmod/vfs_fat: Update to use FF_DIR instead of DIR.
2017-01-30 12:08:15 +11:00
28899cd971
lib/oofatfs: Update oofatfs library.
...
From https://github.com/micropython/oofatfs , branch work-R0.12b,
commit 46fb53331e7a583c29a41d37ce4b53f2718597e5.
2017-01-30 12:07:40 +11:00
8ffe804c24
nrf5/hal: Adding new macros functions to mphalport.h which are used by extmod i2c machine module.
2017-01-30 00:32:19 +01:00
61c026e51f
nrf5/i2c: Adopting use of extmod/machine_i2c module as base for port's machine i2c module.
2017-01-30 00:31:00 +01:00
bb9cd36314
nrf5/i2c: Backing up before trying out extmod i2c integration.
2017-01-29 17:53:01 +01:00
a5bed53738
examples/hwapi: Consistently use Signal class to define LEDs.
2017-01-29 19:09:33 +03:00
297af6036e
examples/hwapi: Use Signal for inverted LED on ESP-12.
2017-01-29 18:57:37 +03:00
287180a0a8
esp8266/modmachine: Add Signal class.
2017-01-29 18:57:37 +03:00
7a7516d40d
extmod/machine_signal: Implement "signal" abstraction for machine module.
...
A signal is like a pin, but ca also be inverted (active low). As such, it
abstracts properties of various physical devices, like LEDs, buttons,
relays, buzzers, etc. To instantiate a Signal:
pin = machine.Pin(...)
signal = machine.Signal(pin, inverted=True)
signal has the same .value() and __call__() methods as a pin.
2017-01-29 18:57:36 +03:00
18b6835a92
esp8266/machine_pin: Implement pin ioctl protocol.
...
For polymorphic interfacing on C level.
2017-01-29 18:47:27 +03:00
fec5c75068
nrf5: Adding i2c class to machine module globals table.
2017-01-29 16:41:18 +01:00
bfc67dd99c
nrf5: Updating main.c to initialize the i2c machine module if selected.
2017-01-29 16:38:48 +01:00
f529aa9e67
nrf5/i2c: Updating i2c machine module with new constructor parameters to set scl and sda pins. Also updating print funciton to debug pin number and port number for the gpio set.
2017-01-29 16:38:13 +01:00
Andrew Gatt
Damien George
Glenn Ruben Bakke
Paul Sokolovsky