Commit Graph

25124 Commits

Author SHA1 Message Date
Damien George
cf849d84b9 stm32/boards: Enable MICROPY_HW_SPIFLASH_ENABLE_CACHE on VCC_GND boards.
Because these boards use the SPI flash cache in their bdev.c configuration.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-10 22:48:17 +10:00
Damien George
71e3538a32 stm32/usb: Add USB_VCP.irq method, to set a callback on USB data RX.
Usage:

    usb = pyb.USB_VCP()
    usb.irq(lambda u:print(u, u.read()), usb.IRQ_RX)

Signed-off-by: Damien George <damien@micropython.org>
2021-06-10 15:26:21 +10:00
Dan Halbert
01a8a95b2c fix signed/unsigned compilation problem 2021-06-10 01:14:16 -04:00
Dan Halbert
d3d9e0a487 add debouncing 2021-06-10 00:07:23 -04:00
Dan Halbert
bdb70669a1 fix bad merge 2021-06-09 23:47:49 -04:00
Dan Halbert
4deca98f59 Merge branch 'keypad-scanning' of https://github.com/dhalbert/circuitpython into keypad-scanning 2021-06-09 23:42:24 -04:00
Tsutomu IKEGAMI
0a7c839c13 Fix format (expand tab) 2021-06-10 12:11:12 +09:00
Tsutomu IKEGAMI
72c4a5a523 Fix coordinate conversion algorithm of partial refresh area in displayio.TileGrid 2021-06-10 11:47:51 +09:00
Scott Shawcroft
fb7dc9bcd5
Merge pull request #4875 from benclifford/pulldown
Correct pull-down direction in parameter documentation for rp2pio
2021-06-09 18:21:55 -07:00
Ben Clifford
5c835adb10 Correct pull-down direction in parameter documentation for rp2pio 2021-06-09 20:39:56 +00:00
Jeff Epler
576003e989
Merge pull request #4873 from netroy/fix-4810
Update the sdkconfig for LILYGO TTGO T8 ESP32-S2
2021-06-09 14:44:42 -05:00
Jeff Epler
26a75f74ec
Merge pull request #4862 from DavePutz/issue_3383
Fix for issue #3383 - SAMD5x microcontroller.cpu.voltage
2021-06-09 14:42:27 -05:00
root
bc34403d71 Removed all references to MICROCONTROLLER_VOLTAGE_DISABLE 2021-06-09 10:46:14 -05:00
Aditya
3e463ed89e fix #4810 2021-06-09 17:37:22 +02:00
Jeff Epler
c6dee5288f
Merge pull request #4870 from jepler/kaluga-1.3
Add kaluga version 1.3
2021-06-09 08:37:51 -05:00
Dan Halbert
7d23206018 Inital keypad work: Keys working: one pin per key
keypad.Buttons and keypad.State

Buttons -> Keys; further work

wip

wip

wip: compiles

about to try

keypad.Keys working
2021-06-08 20:27:31 -04:00
Dan Halbert
abe29fc6d9 merge from upstream 2021-06-08 18:03:43 -04:00
Dan Halbert
44b876f769 Inital keypad work: Keys working: one pin per key
keypad.Buttons and keypad.State

Buttons -> Keys; further work

wip

wip

wip: compiles

about to try

keypad.Keys working
2021-06-08 17:47:21 -04:00
Jeff Epler
124c7b785a Add kaluga version 1.3
.. this board is nearly the same as the "1.2" version originally
released, but makes a few changes to reduce pin conflicts between the 13-pin
camera header and the bootstrapping pins.  "1.3" was introduced in summer
2020-- check the bottom of your board silk to find out whether you have a 1.2
or a 1.3, because it's not clear whether there is remaining 1.2 stock.

Another vexing fact about the 1.3 is that its LCD can have one of two
chipets, and the chipset used is not marked anywhere!
2021-06-08 13:28:48 -05:00
root
72db13fc2d enable microcontroller.cpu.voltage on SAME54 2021-06-08 10:04:40 -05:00
Zoltán Vörös
8c02b94946 nrf: Add more math sources to Makefile, and enable log2 implementation.
This commit adds a few math functions to the source list in the Makefile,
and implements the log2f function, so that ulab can be compiled on the nrf
boards.  It also addresses part of #5162.
2021-06-08 16:39:47 +10:00
Miguel Grinberg
de2e081260 extmod/uasyncio: Fix start_server and wait_closed race condition.
This fix prevents server.wait_closed() from raising an AttributeError when
trying to access server.task.  This can happen if it is called immediately
after start_server().
2021-06-08 15:10:50 +10:00
Abilio Marques
525a920ca5 unix/modffi: Fix conversion between Python integers and ffi types.
This commit fixes the following problems converting to/from Python integers
and ffi types:
- integers of 8 and 16 bits not working on big endian
- integers of 64 bits not working on 32 bits architectures
- unsigned returns were converted to signed Python integers

Fixes issue #7269.
2021-06-08 13:06:17 +10:00
Limor "Ladyada" Fried
c1c101ca2d
Merge pull request #4864 from ladyada/main
macropad rev B definion and fix for SH110x addressing
2021-06-07 21:59:56 -04:00
lady ada
467a4e7664 fix comment 2021-06-07 19:51:57 -04:00
lady ada
b39dd84560 move the col/row offsets to the top so oleds can take advantage of em 2021-06-07 19:43:49 -04:00
Scott Shawcroft
12499d6e26
Merge pull request #4860 from microDev1/update-readme
Update readme
2021-06-07 15:08:23 -07:00
Lucian Copeland
b6a268fca4 Further deinit additions 2021-06-07 14:13:59 -04:00
Lucian Copeland
63c1791d87 Merge remote-tracking branch 'upstream/main' into rp2040-alarms 2021-06-07 14:11:41 -04:00
Lucian Copeland
f2149edbd2 Add deinit to new boards 2021-06-07 12:48:12 -04:00
lady ada
2ff9e9766f handclang 2021-06-07 12:39:59 -04:00
Limor "Ladyada" Fried
c4f685aab1
Merge pull request #4865 from ZodiusInfuser/pimoroni_boards
Added definition for upcoming Pimoroni RP2040 board
2021-06-07 11:13:01 -04:00
lady ada
3890271f19 turn off all neopix when booting 2021-06-06 18:30:17 -04:00
lady ada
8f1c25c8ae fix SH110x mode, the SH1107 is actually column not row mode BUT the SD1107 module we use is vertical orientation (confusing!) so row/col are NOT swapped. we will have to fix the SH1107 driver to match. this fix required for SH1106 (which uses the same page mode commands but ISNT rotated) 2021-06-06 18:25:40 -04:00
lady ada
01195c2089 update to rev B 2021-06-06 15:57:41 -04:00
foamyguy
abfeb69454 remove hashes from version. upload to pypi in same step as S3 2021-06-06 10:14:02 -05:00
Damien George
20a8f4f7ec tests/unix: Add ffi test for integer types.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-06 22:52:25 +10:00
Damien George
7842085434 tests/multi_bluetooth/ble_gap_advertise.py: Allow to work without set.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-06 21:58:07 +10:00
Damien George
da8e47da21 tests/run-multitests.py: Allow to work without sys.stdout on target.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-06 21:58:07 +10:00
Damien George
d00523ba0c zephyr/boards: Enable ubluetooth on nucleo_wb55rg board.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-06 21:57:44 +10:00
Damien George
80e79a777d zephyr: Add initial ubluetooth module integration.
Currently only advertising and scanning are supported, using the ring
buffer for events (ie not synchronous events at this stage).

The ble_gap_advertise.py multi-test passes (tested on a nucleo_wb55rg
board).

Signed-off-by: Damien George <damien@micropython.org>
2021-06-06 21:57:06 +10:00
Maureen Helm
5cb2ade65b zephyr: Update to Zephyr v2.6.0.
Updates the zephyr port build instructions and CI to use the latest
zephyr release tag.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-06-06 20:17:42 +10:00
Maureen Helm
3331b1811d zephyr: Disable CONFIG_NET_SOCKETS_POSIX_NAMES.
Zephyr's default value for CONFIG_NET_SOCKETS_POSIX_NAMES was changed
from false to true between Zephyr v2.5.0 and v2.6.0. This caused
conflicts in MicroPython, which uses the zsock_ prefixed functions, so
disable it.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-06-06 20:17:42 +10:00
Maureen Helm
f17c0db5f7 zephyr: Update disk access configuration for Zephyr v2.6.0.
Zephyr's Kconfig symbols and defaults for SDHC/SDMMC disk drivers and
the disk access subsystem were reworked between Zephyr v2.5.0 and
v2.6.0. Update MicroPython accordingly.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-06-06 20:17:42 +10:00
root
b2dea8ae0d Fix for issue #3383 - SAMD51 microcontroller.cpu.voltage 2021-06-05 16:17:14 -05:00
foamyguy
5a22a0f601 upload stubs step in actions 2021-06-05 12:07:12 -05:00
microDev
0de61075e4
update readme 2021-06-05 10:15:57 +05:30
Damien George
b15e1ef5a6 github/workflows: Add workflow to build and run unix port on ARM.
Following on from ef16834887, this adds a
coverage build and running of the test suite on an ARM 32-bit Linux-based
architecture.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-05 11:03:09 +10:00
Damien George
36cb365cad unix/main: Increase stack limit on ARM architectures.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-05 11:03:09 +10:00
Damien George
5e1d3c8b5d py/stackctrl: Prevent unused-var warning when stack checking disabled.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-05 11:03:09 +10:00