Dan Halbert
7bb90dbf45
remove redundant port/*/.gitignore; cleanup others
2022-10-01 11:52:36 -04:00
Jeff Epler
907c5d387f
Tweak black_bindings
...
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.
Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation
This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)
It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.
I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
2022-09-30 11:18:13 -05:00
Dan Halbert
db065a299f
Merge pull request #6933 from jepler/ 🥧 🐮
...
Implement a useful subset of `wifi` and `socketpool` modules on 🥧 🐮
2022-09-28 18:09:24 -04:00
Jeff Epler
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out
2022-09-28 10:06:33 -05:00
Jeff Epler
77fcb8a5a3
disable rainbowio on this arduino_nano_33_iot
...
The gpio changes took away enough code space that it doesn't fit.
2022-09-28 10:05:32 -05:00
Dan Halbert
39492b3403
Merge pull request #6951 from jepler/black-bindings
...
Black bindings
2022-09-27 17:57:07 -04:00
Jeff Epler
b2cc8d2aad
run black_bindings across all bindings
2022-09-27 15:21:42 -05:00
Kattni Rembor
ea5e4b20b0
Add more spacing for aliased pins.
2022-09-27 15:50:30 -04:00
Kattni Rembor
9c4c7241d0
Update pin order to match silk.
2022-09-27 15:24:07 -04:00
Dan Halbert
c567b43441
add CIRCUITPY_USB_IDENTIFICATION to turn off on smallest builds
2022-09-20 14:32:38 -04:00
Dan Halbert
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
Radomir Dopieralski
0a0c03c3d2
Fix ugame.py for the ugame10 board
...
It was still trying to use the gamepad module, and there was a typo
2022-08-26 17:07:44 +02:00
Dan Halbert
0c87d0b40d
matrixportal: remove ulab instead of bleio HCI
2022-08-18 10:23:37 -04:00
Dan Halbert
2664d3766d
matrixportal: remove BLEIO HCI to make room to freeze portalbase
2022-08-18 07:43:31 -04:00
Dan Halbert
02cc6c2aee
Merge remote-tracking branch 'adafruit/main' into remove-autobrightness
2022-08-10 08:35:53 -04:00
Scott Shawcroft
138c92f035
Merge pull request #6727 from dhalbert/restore-deleted-modules
...
restore rainbowio and onewireio to a number of boards
2022-08-09 21:44:26 -07:00
Dan Halbert
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
Dan Halbert
34b22eac2a
restore rainbowio and onewireio to a number of boards
2022-08-09 16:10:17 -04:00
Dan Halbert
84807cd6eb
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:13:19 -04:00
Scott Shawcroft
e7d72b1ebe
Use libgcc from Arch on SAMD21 (it's smaller.)
...
Fixes #4705
2022-08-04 16:33:41 -07:00
Scott Shawcroft
9661d3256c
Add more ESP32 boards and enable web workflow
2022-08-01 15:52:08 -07:00
Dan Halbert
9baa2724a7
code formatting suggestion
2022-08-01 00:27:25 -04:00
Dan Halbert
1348cb435b
Fix SAMD I2C frequency check
2022-07-29 19:07:33 -04:00
Scott Shawcroft
6463755577
Merge pull request #6648 from pypewpew/stage-png
...
Add PNG image support to the Stage library
2022-07-27 11:02:48 -07:00
Radomir Dopieralski
d510e60511
Disable bitmaptools and busdevice on pewpew_m4 to fit ja translation
2022-07-27 00:08:02 +02:00
Neradoc
6e5c818311
fix extensions for atmel and 2 boards, matching main
2022-07-26 18:15:59 +02:00
Neradoc
eabe8b971a
list extensions instead of macros names ("bin,uf2" not BIN_UF2)
...
the modules_support_matrix usees a dictionnary per board instead of a list
optionally include the frozen modules URLs in it
2022-07-26 18:15:59 +02:00
Neradoc
d021d9ae4a
Move build extensions to board directories
...
- define CIRCUITPY_BUILD_EXTENSIONS to predefined values
- set CIRCUITPY_BUILD_EXTENSIONS in port and board config
- reuse the support matrix "get_settings_from_makefile" to get it
- move the existing port and board specific values
- remove the C3 specific board values because it's not the default
- update build_release_files.py to use get_settings_from_makefile
2022-07-26 18:15:50 +02:00
Dan Halbert
bb47484cb1
Merge remote-tracking branch 'adafruit/main' into from_bytes-check-parameters
2022-07-19 17:18:26 -04:00
Dan Halbert
51f2253cef
no Russian font for SAMD21; adjust unix build warnings
2022-07-19 14:07:18 -04:00
Scott Shawcroft
ac460dd1e1
Merge branch 'main' into esp32
2022-07-13 15:30:53 -07:00
Dan Halbert
9d77a36fbf
update samd-peripherals submodule
2022-07-08 22:47:36 -04:00
Dan Halbert
c316b950c7
merge from adafruit/main
2022-07-08 15:42:19 -04:00
Jeff Epler
ab3e786611
disable additional module on matrixportal_m4
2022-07-07 20:00:12 -05:00
Jeff Epler
601eb91b89
Disable gifio on matrixportal to reclaim flash space
2022-07-07 17:00:00 -05:00
Dan Halbert
4c20b3cb63
Merge pull request #6564 from adafruit/7.3.x
...
7.3.x
2022-07-06 15:25:24 -04:00
Dan Halbert
131d70cebd
restore traceback to matrixportal build
2022-06-28 16:10:55 -04:00
Dan Halbert
02069eb0b5
wip
2022-06-23 15:59:06 -04:00
Dan Halbert
feb1d903f7
merge 7.3.1 to main
2022-06-23 09:07:49 -04:00
Neradoc
7f968f18c0
move frozen adafruit_circuitplayground to express subdirectory
2022-06-20 16:55:10 -04:00
Dan Halbert
f0bf14094b
Update samd-peripherals to fix SPI DMA problem
2022-06-17 10:59:59 -04:00
Dan Halbert
6e090c96a5
squeeze some specialized builds
2022-06-10 16:24:52 -04:00
Dan Halbert
80ae14202a
Merge pull request #6416 from FoamyGuy/display_brightness_pwm
...
display brightness pwm 500hz frequency
2022-06-05 23:52:42 -04:00
foamyguy
260994d16e
Merge branch 'main' into display_brightness_pwm
2022-06-04 11:32:15 -05:00
foamyguy
cbff9dd8e3
add new argument for all boards with built-in display
2022-06-04 11:08:20 -05:00
Scott Shawcroft
be6936c8ec
Shrink MatrixPortal M4 build
2022-06-03 18:57:01 -07:00
Scott Shawcroft
be67067809
Merge remote-tracking branch 'adafruit/main' into translate_header
2022-06-03 15:18:18 -07:00
Dan Halbert
3ff7ed75c6
Merge pull request #6346 from Neradoc/cpx-frozen-lite
...
Move frozen adafruit_circuitplayground to CPX subdirectory
2022-06-01 21:15:46 -04:00
Scott Shawcroft
09c61efcff
Split partition from LTO enable
2022-06-01 11:12:14 -07:00
Scott Shawcroft
6d3698848c
Fix PDMIn.c formatting
2022-06-01 11:04:33 -07:00
Scott Shawcroft
7fc0aa5791
Fix windows and two samd builds
2022-05-31 14:48:41 -07:00
foamyguy
ffc451b338
argument for backlight_pwm_frequency and use it in pyportal titano build
2022-05-28 12:01:05 -05:00
Scott Shawcroft
9d10a3da66
Conditionalize LTO
2022-05-27 12:59:54 -07:00
Scott Shawcroft
dc5565a5ce
Merge pull request #6436 from dhalbert/judicious-lto
...
LTO: Use -flto and -flto-partition only as needed
2022-05-27 10:31:06 -07:00
Dan Halbert
ca085150ee
disable traceback on samd21; re-enable onewireio on Metro m0
2022-05-26 15:33:04 -04:00
Dan Halbert
95fc7e4713
harmless change to force all ports to build
2022-05-26 11:52:58 -04:00
Dan Halbert
d74193c298
Use -flto and -flto-partition only as needed
2022-05-26 11:36:41 -04:00
George White
8539d6518e
flip CTS and RTS pinmux to match RX and TX
2022-05-26 00:06:00 +00:00
George White
99b23b96d9
fix comment typo and mention datasheet
2022-05-26 00:03:46 +00:00
George White
fb3077ccc2
Implement UART hardware flow control on SAMD chips
2022-05-25 21:34:06 +00:00
Dan Halbert
38f91539dc
Merge pull request #6432 from CytronTechnologies/add-maker-zero-samd21
...
Add new board: Cytron Maker Zero SAMD21
2022-05-25 13:58:33 -04:00
Dan Halbert
1fb210bd40
Merge pull request #5491 from pypewpew/remove-gamepadshift
...
Remove gamepadshift module
2022-05-25 13:58:06 -04:00
Luqmanul Hakim Zulkifli
aef5bc40fb
Deleted white spaces
2022-05-26 00:13:27 +08:00
Luqmanul Hakim Zulkifli
9ed71f0c09
Add Cytron Maker Zero SAMD21
2022-05-25 10:09:30 +08:00
Luqmanul Hakim Zulkifli
0b99967839
Add Cytron Maker Zero SAMD21
2022-05-25 10:08:58 +08:00
Luqmanul Hakim Zulkifli
46f4fcc42f
Add Cytron Maker Zero SAMD21
2022-05-25 10:08:17 +08:00
Luqmanul Hakim Zulkifli
9385f793dc
Add Cytron Maker Zero SAMD21
2022-05-25 10:07:33 +08:00
Luqmanul Hakim Zulkifli
6fa552e257
Delete board.c
2022-05-25 10:04:06 +08:00
Luqmanul Hakim Zulkifli
5453b331f7
Delete mpconfigboard.h
2022-05-25 10:03:53 +08:00
Luqmanul Hakim Zulkifli
8806f5b5d8
Delete mpconfigboard.mk
2022-05-25 10:03:45 +08:00
Luqmanul Hakim Zulkifli
9649d80ea3
Delete pins.c
2022-05-25 10:03:34 +08:00
Luqmanul Hakim Zulkifli
4e467b7f34
Add Cytron Maker Zero SAMD21
2022-05-25 09:46:20 +08:00
Radomir Dopieralski
c0152e7dab
Remove gamepadshift module
...
Everything should be using the keypad module instead.
Note: there are several boards that still had gamepadshift enabled. I
did not contact their authors to make sure they already switched to
keypad in their code and documentation. We should probably wait with
merging this for their go ahead.
2022-05-25 00:48:55 +02:00
Dan Halbert
791064a934
Merge pull request #6427 from dhalbert/8.0.0-onewireio
...
Remove busio.OneWire and bitbangio.OneWire in favor of onewireio.OneWire
2022-05-24 15:32:33 -04:00
Dan Halbert
ecd30d2338
Merge pull request #6428 from dhalbert/8.0.0-restore-rainbowio
...
restore rainbowio to small builds
2022-05-24 15:32:08 -04:00
Dan Halbert
335c93c044
restore rainbowio to small builds
2022-05-24 12:34:08 -04:00
Dan Halbert
74c92ffe9e
Remove busio.OneWire and bitbangio.OneWire
2022-05-24 12:26:33 -04:00
Paint Your Dragon
eefba16644
Correctly scale analog reading per issue #4794
2022-05-24 08:40:51 -07:00
Neradoc
3179db4ef4
move frozen adafruit_circuitplayground to express subdirectory
2022-05-23 22:11:26 +02:00
Dan Halbert
9c643aa907
Merge branch '7.3.x' into merge-7.3.0-rc.1-to-main
2022-05-21 12:57:46 -04:00
Dan Halbert
338e14d9d4
shrink arduino_mkr1300
2022-05-21 10:21:59 -04:00
Dan Halbert
309dab4c75
merge 7.3.0-rc.1 changes to main
2022-05-20 15:37:56 -04:00
Dan Halbert
f63b26c534
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
Dan Halbert
a01dec1df9
message consolidation and more use of validators
2022-05-19 15:38:37 -04:00
Neradoc
8987bf18d0
Add Winbond flash substitute to boards
2022-05-16 22:39:25 +02:00
Dan Halbert
624a00ac45
shrink circuitplayground_express_displayio
2022-05-14 08:54:46 -04:00
Dan Halbert
9028bf213d
Merge pull request #6331 from pypewpew/pewpew_lcd
...
Add new board pewpew_lcd
2022-05-13 12:33:08 -04:00
Radomir Dopieralski
e7735a3631
Add new board pewpew_lcd
2022-05-10 22:25:32 +02:00
Dan Halbert
5edc59f070
Merge pull request #6337 from jepler/property-storage
...
Optimize flash storage of properties
2022-05-06 09:55:18 -04:00
Dan Halbert
98ae047525
Compile more SAMD things conditionallly
2022-05-04 11:41:48 -04:00
Dan Halbert
b181caaefc
add board.LED to Metro M4 AirLift LIte and PyRuler
2022-05-03 16:08:01 -04:00
Jeff Epler
510890b207
Enable squeezing property storage in flash
...
.. and enable it on atmel-samd and raspberrypi. On trinket_m0 this saves
96 net bytes of flash. There are 216 bytes actually saved by reducing
the flash storage size of the property descriptors, but added code in
several paths takes back over half of the 'raw savings'.
By organizing the "get-only" and "get-set" (but no delete) properties
each in a different section, we can represent then more efficiently.
Testing performed: that a get-only property can still be gotten but
can't be set or deleted; that a get-set property can sill be gotten or
set but can't be deleted. Tested on pygamer.
Because this requires linker file support, I only enabled it on two of
the ports.
2022-05-03 08:48:53 -05:00
Jeff Epler
78cf0a90af
Make MP_PROPERTY_GETTER / _GETSET fully declare the property
...
This will enable setting data attributes, namely, the section of the
symbol.
2022-05-03 08:48:53 -05:00
Jeff Epler
31da335cac
Introduce, use MP_PROPERTY_GETTER, _GETSET
...
Later, these can be changed in cunning ways to save flash storage.
2022-05-03 08:48:52 -05:00
Dan Halbert
816a26e8b7
Merge pull request #6321 from dhalbert/samd21-ticks-for-display
...
Preserve ticks for displays across VMs
2022-04-28 09:37:21 -04:00
Michael Wisslead
e63a327107
Bound PulseIn start indexes to maxlen.
2022-04-28 02:28:34 +00:00
Dan Halbert
b25d810af9
Preserve ticks for displays across VMs
2022-04-27 20:06:47 -04:00
Dan Halbert
b7541088f4
shrink circuitplayground_express_crickit
2022-04-26 17:51:47 -04:00
Dan Halbert
7a77aae4be
shrink feather_m0_supersized
2022-04-26 16:52:43 -04:00
Dan Halbert
6b25ccf1a4
remove stray space
2022-04-26 14:26:42 -04:00
Dan Halbert
63abd9a9cf
Merge pull request #6312 from dhalbert/adjust-neopixel-timings
...
test and adjust NeoPixel timings on multiple ports
2022-04-26 13:18:47 -04:00
Dan Halbert
3a8fb4e956
Merge pull request #5852 from jepler/floppy
...
Add floppyio
2022-04-26 11:40:19 -04:00
Dan Halbert
4eeaf41edc
test and adjust NeoPixel timings on multiple products
2022-04-25 23:12:24 -04:00
Dan Halbert
0642917cf7
Merge pull request #6270 from FoamyGuy/tilegrid_bitmap_property
...
adding bitmap property to TileGrid
2022-04-25 09:09:28 -04:00
Dan Halbert
76d54ca8ad
shrink sparkfun_redboard_turbo
2022-04-21 12:58:46 -04:00
George White
3b5171c4ff
Move hook implementation to supervisor
2022-04-18 14:09:36 +00:00
George White
32fc084b39
Removed compiler flag in favor of MP_WEAK implementation
2022-04-18 13:10:12 +00:00
George White
0ba93b20e5
Setup flash pins on Sparkfun SAMD51 Micromod
2022-04-18 13:10:12 +00:00
foamyguy
948040f1f0
disable onewire instead of displayio on boards without room
2022-04-10 10:00:37 -05:00
foamyguy
7ad5fa511e
disable displayio for some boards
2022-04-09 16:24:06 -05:00
Jeff Epler
766bf8f671
disable floppyio on kicksat-sprite
2022-04-07 10:57:37 -05:00
Jeff Epler
f7be4345d9
Merge remote-tracking branch 'origin/main' into floppy
2022-04-07 08:37:46 -05:00
Dan Halbert
2693a4cfe1
Merge pull request #6069 from gamblor21/uzlib-module
...
zlib Module
2022-04-06 12:06:44 -04:00
Mark
8ed7b114cd
Merge branch 'main' into uzlib-module
2022-04-03 11:48:37 -05:00
gamblor21
9d67e62f4d
Removed from small board
2022-04-03 11:47:19 -05:00
Jeff Epler
372306411a
samd: Don't rely on RTC interrupt
...
I instrumented RTC_Handler and determined that on SAMD51 it was possible
for the interrupt to be delivered well before the actual overflow of the
RTC COUNT register (e.g., a value as small as 0xffff_fffd could be seen
at the time of overflow)
Rather than depending on the overflow interrupt coming in at the same time
as COUNT overflows (exactly), rely only on observed values of COUNT in
_get_count, overflowing when it wraps around from a high value to a low
one.
With this change, PLUS a second change so that it is possible to warp
the RTC counter close to an overflow and test in 20ms instead of 3 days,
there was no problem detected over 20000+ overflows. Before, a substantial
fraction (much greater than 10%) of overflows failed.
Fixes #5985
Change to common-hal/rtc/RTC.c for time warping (plus make rtc_old_count non-static):
```patch
void common_hal_rtc_set_calibration(int calibration) {
+
+ common_hal_mcu_disable_interrupts();
+
+ RTC->MODE0.COUNT.reg = 0xffffff00;
+ rtc_old_count = 0;
+ do {
+ while ((RTC->MODE0.SYNCBUSY.reg & (RTC_MODE0_SYNCBUSY_COUNTSYNC | RTC_MODE0_SYNCBUSY_COUNT)) != 0) { }
+ }
+ while(RTC->MODE0.COUNT.reg < 0xffffff00);
+ common_hal_mcu_enable_interrupts();
+
+ mp_printf(&mp_plat_print, "Warping RTC in calibration setter count=%08x rtc_old_count=%08x\n", RTC->MODE0.COUNT.reg, rtc_old_count);
```
Test program:
```python
import time
from rtc import RTC
i = 0
while True:
RTC().calibration = 1 # Warps to ~16ms before overflow, with patch to RTC code
t0 = time.monotonic_ns()
et = t0 + 20_000_000 # 20ms
while (t1 := time.monotonic_ns()) < et: pass
i += 1
print(f"{i:6d}: duration {t1-t0}")
if t1-t0 > 200_000_000: break
print()
```
2022-03-25 14:48:03 -05:00
Jeff Epler
d91ca7369c
Merge remote-tracking branch 'origin/main' into revamp-duplicate-usb-check
2022-03-24 09:44:41 -05:00
Jeff Epler
a07ac72cc5
Improve the USB vid:pid duplicate checker
...
To me, it made more sense to track which boards go together in a cluster;
when reviewing a request to actually use a duplicate vid/pid, you want
to know what board(s) it is aliasing.
I also revamped the detection of non-USB boards so that a board .mk file
that couldn't be parsed by the code here would raise a problem instead
of just being skipped for the purposes of checking.
There were some lines with comments on the end, and some variation in
capitalization of the IDs. These are all normalized and a (sometimes
unfriendly!) error printed when it's incorrect.
Before this, here were some ways to trick the duplicate vid/pid checker:
```
USB_PID = 0XABCD
USB_PID = 0xAbCd
USB_PID = 0xABCD # harmless comment?
```
None of these things were ever done on purpose.
2022-03-24 09:42:11 -05:00
Scott Shawcroft
4363361c87
Board definition clean up
...
Removes:
* AUTORESET_DELAY_MS which never did anything but was introduced
somehow.
* CIRCUITPY_BOOT_BUTTON in all but one ESP board because they all have
them. There is a default based on the strapping pins.
* BOARD_USER_SAFE_MODE_ACTION because it was all the same for boards
with boot buttons. Now the safe mode code manages the message.
2022-03-21 17:58:43 -07:00
Scott Shawcroft
c098474854
Disable aesio and traceback on matrixportal to save space
2022-03-16 10:41:17 -07:00
Scott Shawcroft
dcc3ec171e
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-15 13:56:11 -07:00
Scott Shawcroft
f602296e59
Re-enable BLE on MatrixPortal. Remove PortalBase
...
We have a guide that uses it. It was removed in #6043 without
realizing that.
Fixes #6152
2022-03-14 17:04:46 -07:00
Dan Halbert
f13d218749
Merge pull request #6125 from tannewt/usb_host
...
Start of USB host API
2022-03-11 21:41:28 -05:00
Scott Shawcroft
7cb66dd316
Merge pull request #6142 from dhalbert/7.2.x-autoreload-fake-sleep
...
7.2.x autoreload rework (again)
2022-03-11 16:46:04 -08:00
Dan Halbert
e4cd9690f1
rework auto-reload delay logic
2022-03-11 14:03:04 -05:00
Dan Halbert
19e7647f3d
turn off MIDI on sensebox_mcu for sapce
2022-03-10 18:20:04 -05:00
Dan Halbert
a7260a8b61
squeeze arduino_zero further
2022-03-10 15:56:51 -05:00
Dan Halbert
c5947fd6de
squeeze arduino_zero and sensebox_mcu
2022-03-10 12:46:08 -05:00
Dan Halbert
6ddab0f3c8
shrink matrixportal_m4
2022-03-10 11:20:44 -05:00
Dan Halbert
9b2e22a6df
Make autoreload checking more robust
...
- Add reset for autoreload. De-request ticks.
- Separate state a little more in autoreload.c
- Rename some routines.
- Remove redundant settings of CIRCUITPY_AUTORELOAD_DELAY_MS.
2022-03-09 11:07:55 -05:00
Scott Shawcroft
4ac6ef0086
Fix SAMD51 builds on GCC11.2
...
Fixes #5351
2022-03-08 10:41:34 -08:00
Dan Halbert
1c8f671f0a
Merge pull request #6118 from pewpew-game/parallel-reset-optional
...
paralleldisplay: reset and read pins should be optional
2022-03-08 09:34:25 -05:00
Dan Halbert
05a4d24a0f
Merge pull request #6117 from dhalbert/__future__
...
implement `from __future__ import annotations`
2022-03-08 09:33:36 -05:00
Dan Halbert
eff6057fa3
shrink matrixportal_m4
2022-03-07 21:37:28 -05:00
Scott Shawcroft
83593a1558
Start of USB host API
...
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)
Related to #5986
2022-03-07 18:07:25 -08:00
Michael Himing
78d7bce02a
seeeduino_xiao_kb: Copy pins from seeeduino_xiao
2022-03-08 08:58:32 +11:00
Scott Shawcroft
ff865b60da
Merge pull request #5298 from pewpew-game/logo-remove
...
Add a flag for removing the Blinka logo from the REPL
2022-03-07 12:53:56 -08:00
Dan Halbert
96aec37ead
fix whitespace
2022-03-07 09:11:29 -05:00
Dan Halbert
e91c2e13fb
Seediuno XIAO SAMD21: inverted pins
2022-03-07 09:03:32 -05:00
Rick Sorensen
be3129a917
Update ports/atmel-samd/boards/seeeduino_xiao/pins.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-06 22:59:54 -06:00
Rick Sorensen
6fd0643b1e
Remove trailing white space
2022-03-06 21:15:37 -06:00
Rick Sorensen
d7ef8f18df
pins.c: added comment of reverse wiring for XIAO LEDs
2022-03-06 20:07:42 -06:00
Rick Sorensen
36a27806d8
pins.c: Modify and correct LED pin mappings and names for Xiao
...
Added YELLOW_LED=LED=D13,
BLUE1_LED=RX_LED,
BLUE2_LED=TX_LED
2022-03-06 19:20:37 -06:00
Radomir Dopieralski
b69a06b2ed
Also fix the read pin in the atmel and rp2040 ports
2022-03-06 11:33:07 +01:00
Radomir Dopieralski
93ea1bd9bd
Add a flag for removing the Blinka logo from the REPL
...
There may be several reasons why we might want to remove the logo form
the REPL: a fork of CircuitPython that doesn't have the right to use the
logo, an especially small display that needs all the room it has to be
useful, displays that are especially vulnerable to burn-in, maybe even
the smaller chips where we want to save as much flash memory as
possible.
2022-03-05 15:38:59 +01:00
James Bowman
353ea6f70e
Add EVE support to Feather M4 CAN
2022-02-27 18:34:30 -08:00
Dan Halbert
01d880829a
Merge pull request #6041 from t-ikegami/enable_uasyncio
...
Enable _uasyncio module
2022-02-25 13:42:29 -05:00
Dan Halbert
61425864f0
turn off onewireio in matriportal_m4
2022-02-25 12:22:45 -05:00
Scott Shawcroft
9e16487203
Merge pull request #6048 from t-ikegami/atmel-samd-fix-alarm
...
Fix atmel-samd alarm module
2022-02-23 15:29:54 -08:00
Tsutomu IKEGAMI
6499d18bb8
Remove board_deep_sleep_hook, which should be done in board_deinit.
2022-02-21 19:21:42 +09:00
gamblor21
edee8e3409
disable on some boards
2022-02-21 00:47:05 -06:00
gamblor21
6f537e50c3
Disable in M0 builds
2022-02-20 16:03:25 -06:00
Tsutomu IKEGAMI
bd9dd3dc63
Fix atmel-samd alarm module.
2022-02-17 23:00:26 +09:00
Melissa LeBlanc-Williams
8f741e7767
Removed more frozen libs and disabled unlikely used modules
2022-02-16 14:47:12 -08:00
Melissa LeBlanc-Williams
0aadb4e256
Remove DisplayText Frozen Lib from MatrixPortal saving about 60K
2022-02-16 14:04:00 -08:00
Melissa LeBlanc-Williams
726bf02ea8
Add PortalBase and Fake Requests and update Frozen Libs on Portal boards
2022-02-16 10:12:54 -08:00
George White
f3b67cc104
MicroMod SAMD51: Correct default MISO
2022-02-12 17:49:50 +00:00
Scott Shawcroft
54589de15b
Merge pull request #6004 from dhalbert/samd-rtc-count-overflow
...
fetch RTC count more atomically
2022-02-10 10:16:57 -08:00
Dan Halbert
b18b0fd5b9
fetch RTC count more atomically
2022-02-09 15:32:16 -05:00
Chris Osterwood
7247990c3e
Update pins.c
...
Fix typo
2022-02-09 14:26:20 -05:00
Chris Osterwood
8e3f719056
Update mpconfigboard.mk
...
Add build flags to turn off subsystems which are not relevant to the USB Hub
2022-02-09 13:54:08 -05:00
Chris Osterwood
4c371db5b2
Update pins.c
...
Adds a pin which is used by recent firmware for PCB hardware identification.
2022-02-09 13:53:19 -05:00
Dan Halbert
72317c309d
turn off CIRCUITPY_ONEWIREIO by default for skinny SAMD21 builds
2022-02-09 11:40:07 -05:00
Scott Gauche
a8d8651873
Canonical C style for half_duplex = true/false
2022-02-08 23:13:22 -05:00
Scott Gauche
309f4fb2b9
add half_duplex false param to spi construct function call in some board files
2022-02-08 22:59:26 -05:00
Scott Gauche
89ad767b8f
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
Jeff Epler
07e710b0a0
Merge remote-tracking branch 'origin/main' into floppy
2022-02-04 09:01:36 -06:00
Dan Halbert
e355ea2b91
shrink seeeduino_xiao build
2022-02-03 13:27:36 -05:00
Jeff Epler
31febc336b
fix sam e51 comment & floppy building
2022-02-02 21:37:47 -06:00
Jeff Epler
224069551a
disable onewireio on seeduino xiao (samd21)
...
I don't understand how this stopped fitting, as none of the added code
is used in this build.
2022-02-02 21:36:58 -06:00
Jeff Epler
1be8ae75d4
skip floppyio if not full build
2022-02-02 17:07:02 -06:00
Dan Halbert
0129735dbe
Merge pull request #5969 from Life-Imaging-Services/crc32
...
crc32() code moved into binascii
2022-02-02 18:07:02 -05:00
Dan Halbert
0d43e3e734
squeeze datum_imu build
2022-02-02 13:44:40 -05:00
Dan Halbert
a04cd6444b
Merge pull request #5966 from Neradoc/add-alias-stemma-i2c
...
Add alias board.STEMMA_I2C for all boards with qwiic/stemma/QT
2022-02-02 11:08:13 -05:00
Neradoc
b2c8fd3938
add board.STEMMA_I2C alias to some boards
2022-02-02 01:18:46 +01:00
Dan Halbert
d0453f460d
shrink sensebox; fix doc error
2022-02-01 10:12:26 -05:00
Dan Halbert
cc410ad6a3
common-hal I2C combined write_read
2022-01-31 22:03:30 -05:00
Scott Shawcroft
43dae6c8d1
Merge pull request #5951 from dhalbert/track-board-default-objects
...
Track creation of board.I2C(), etc.
2022-01-31 14:29:19 -08:00
Dan Halbert
20a17bec25
shrink arduino_mkrzero and sparkfun_samd21_dev
2022-01-31 09:16:03 -05:00
Dan Halbert
93a60eecab
Merge pull request #5946 from tammymakesthings/pr4218-neopixel-show-after-deinit
...
Fixes neopixel show() after deinit() not raising an exception
2022-01-29 18:30:37 -05:00
Dan Halbert
a88969d306
Revert "Disabled audioio, audiobusio, USB midi for sparkfun_redboard_turbo to save flash space"
...
This reverts commit 5e2166673b
2022-01-29 17:06:26 -05:00
Dan Halbert
6e98186f0d
turn off more things on SAMD21 full builds
2022-01-29 17:05:51 -05:00
Tammy Cravit
5e2166673b
Disabled audioio, audiobusio, USB midi for sparkfun_redboard_turbo to save flash space
2022-01-29 14:31:58 -07:00
Dan Kulinski
19f9163892
Bringing branch up to date with current main
2022-01-25 11:02:00 -07:00
Dan Kulinski
60801066b2
Fix magtag, openbook for EPaperDisplay constructor
2022-01-24 12:34:01 -07:00
Scott Shawcroft
9a353a4f56
Merge pull request #5422 from Neradoc/nera-secondary-I2C
...
Allow multiple board buses
2022-01-21 11:08:14 -08:00
microDev
67293c265c
Merge branch 'main' into board-bus
2022-01-21 10:08:39 +05:30
Dan Halbert
fed5227de9
shrink stringcar_m0_express
2022-01-20 20:34:04 -05:00
Scott Shawcroft
13db65566d
ESP NeoPixel fixes
...
This tweaks the RMT timing to better match the 1/3 and 2/3 of 800khz
guideline for timing. It also ensures a delay of 300 microseconds
with the line low before reset.
Pin reset is now changed to the IDF default which pulls the pin up
rather than CircuitPython's old behavior of floating the pin.
Fixes #5679
2022-01-19 16:29:07 -08:00
Jeff Epler
d816a4f19d
Add floppyio
...
Initially enabled for samd51, this enables reading raw flux data as well
as DOS/MFM formatted media.
This is only the low-level code for reading & decoding flux pulses from a floppy drive.
high level details will live in a Python library.
adafruit-circuitpython-floppy will take care of details like stepping
from track to track, etc.
2022-01-13 15:37:36 -06:00
Jeff Epler
db5f99c63e
Add a function to get low level register access
...
The port is free to return NULL for any/all of these, and the caller has
to check.
This will be used in the floppy code, because aside from getting the
registers, it looks like all is independent of MCU.
2022-01-13 15:29:03 -06:00
Scott Shawcroft
d5ca7f0348
Merge pull request #5842 from dhalbert/pdmin-fix
...
Fixes SAMD PDMIn
2022-01-12 10:50:04 -08:00
Dan Halbert
dd54e8f657
PDMIn: enable IRQ; need a volatile; call pdmin_reset()
...
enable IRQ for PDMIn
2022-01-12 11:44:43 -05:00
Brian Dean
1fb4f02de2
ports/atmel-samd/boards/bdmicro_vina_d51/pins.c: Add LED_AUX pin.
2022-01-06 16:32:17 -05:00
Dan Halbert
9d2a32d07e
countio: add selectable rise and fall detection, pulls
2021-12-31 16:34:58 -05:00
Jeff Epler
34e8bfd09e
explicitly use mpz long ints on this board
2021-12-27 16:39:04 -06:00
Jeff Epler
1d13c4ccd1
Centralize LONGINT_IMPL handling
...
This closes #5782
2021-12-27 10:21:47 -06:00
Dan Halbert
325c2161e9
shrink CPX crickit build
2021-12-23 12:24:16 -05:00
Dan Halbert
bbe30514ef
Fix other INTENCLR and INTENSET to write whole reg
2021-12-12 22:25:44 -05:00
