09bdad6c5b
Merge pull request #5877 from 0hotpotman0/main
...
Add softdev_version 7.0.1
2022-01-17 21:39:12 -05:00
3453ced296
Merge pull request #5860 from tannewt/s3_core_1
...
Switch CP to core 1 on S3
2022-01-17 16:10:05 -05:00
895a8a9e72
Merge pull request #5866 from dhalbert/espressif-open-drain
...
fix espressif DigitalInOut open-drain
2022-01-17 12:51:31 -06:00
9b9dd97e00
add softdev_version 7.0.1
2022-01-17 14:49:11 +08:00
784a5edc4b
Define default SPI pins on kb2040
...
Fixes #5875
2022-01-17 06:52:08 +01:00
11848b1826
use GPIO_MODE_ instead of GPIO_MODE_DEF
2022-01-15 23:05:33 -05:00
c70c8a9390
fix espressif open-drain
2022-01-15 19:54:31 -05:00
f6cf15de43
Switch CP to core 1 on S3
2022-01-14 12:22:38 -08:00
993e51e5cc
Fix USB when enabling wifi
2022-01-14 11:52:14 -08:00
7af7cd418c
Merge pull request #5853 from tannewt/s3_config_rework
...
Split out target specific configs.
2022-01-14 10:25:50 -08:00
86e7247d11
Merge pull request #5854 from jepler/issue-5680
...
patch esp-idf for i2c crash
2022-01-14 09:37:23 -08:00
c87d9c947b
patch esp-idf for i2c crash
...
In theory, this Closes : #5680 -- I didn't test it on HW yet.
2022-01-14 08:53:24 -06:00
869cf5eba5
Run USB on the same core as CP
2022-01-13 15:55:37 -08:00
39639ecd17
Rework configs to take target into account
...
New script will filter settings to different tiers.
2022-01-13 15:55:37 -08:00
2233026556
Merge pull request #5848 from prplz/esp32s3-devkits
...
Esp32s3 devkits
2022-01-13 14:02:44 -08:00
59275c7225
Merge pull request #5846 from jepler/feather-esp32s2-tft-spi
...
feather esp32s2 tft: fix sharing of main display bus
2022-01-12 23:05:42 -05:00
a878e3377c
Rename espressif_esp32s3_devkitc_1 to devkitc_1_n8r2
2022-01-13 13:24:06 +11:00
212eedc42f
Rename espressif_esp32s3_devkitc_1_nopsram to devkitc_1_n8
2022-01-13 13:24:06 +11:00
7575cacdc5
Add espressif_esp32s3_devkitc_1_n8r8
2022-01-13 13:24:06 +11:00
1022866d95
Merge pull request #5844 from kattni/add-button-pin
...
Add button pin to Feathers, fix pin order on QT Py.
2022-01-12 18:11:46 -05:00
10c3836bc0
feather esp32s2 tft: fix sharing of main display bus
2022-01-12 14:35:00 -06:00
ae58858036
Merge pull request #5820 from CharString/waveshare_rp2040_zero
...
Waveshare RP2040-Zero board definition
2022-01-12 10:56:55 -08:00
fb96c09118
Add button pin to Feathers, fix pin order on QT Py.
2022-01-12 13:54:56 -05:00
d5ca7f0348
Merge pull request #5842 from dhalbert/pdmin-fix
...
Fixes SAMD PDMIn
2022-01-12 10:50:04 -08:00
dd54e8f657
PDMIn: enable IRQ; need a volatile; call pdmin_reset()
...
enable IRQ for PDMIn
2022-01-12 11:44:43 -05:00
8226fb8e0b
Bring pins in line with board documentation.
...
This brings the pins in line with the documented [pinouts]. The only
"special" pins:
- GP0, GP1 are mentioned as the default UART, so we init them as
such and give them the TX and RX alternative names.
- GP16 is connected to the onboard neopixel DIN line and we assign it
the NEOPIXEL name. (Power of the neopixel is connected to the 3.3V
rail, not a pin. See [schematic].)
- GP26, GP27, GP28, GP29 have unambiguous ADC designations in the
[pinouts], so we assign the `A` analogue names as the Pico board
definition does.
[pinouts]: https://www.waveshare.com/wiki/RP2040-Zero#Pinouts
[schematic]: https://www.waveshare.com/w/upload/4/4c/RP2040_Zero.pdf
2022-01-12 12:27:54 +01:00
9b825869c5
raspberrypi : Check UART before claiming pins, claim it after
...
Co-authored-by: Scott Shawcroft <scott@adafruit.com>
2022-01-11 22:02:47 +01:00
2251d0f4b0
raspberrypi: Claim UART after checking pins
...
If, for some reason, you mix up TX and RX when calling `busio.UART` (who would do that ;) ), you get `Invalid pins`. When you go to try again, you'll get `All UART peripherals are in use` because the interface was claimed as busy before pins are verified. This should fix that issue.
2022-01-11 15:13:36 +01:00
d23d2e7bf4
Merge pull request #5819 from tannewt/piunora
...
Add Piunora and Zero. Also, enable full build
2022-01-10 19:33:23 -05:00
968c57e045
Merge pull request #5829 from kattni/tft-feather-pin-fix
...
Fix typo, pin order.
2022-01-10 15:25:45 -05:00
838a007ca9
Merge pull request #5813 from EmergReanimator/code_improvements
...
Introduced ringbuf_init to perform static buffer initialisation
2022-01-10 12:12:25 -08:00
4efbfca2b0
Fix typo, pin order.
2022-01-10 14:45:54 -05:00
86a482f520
add ble stack 7.3.0 version for complie the uf2 flie
2022-01-10 11:05:06 +08:00
e23b272595
Added missing LDO control pin (SARA_PWR)
2022-01-08 16:39:48 +01:00
783106545c
Remove LED pin.
...
There's just the NEOPIXEL on this board, no other LED.
2022-01-07 23:25:50 +01:00
d8f18d36a4
Initial Waveshare RP2040-Zero board definition
...
`board.NEOPIXEL` works. Once you have an LED cycling colours, you're 99%
done. :-)
2022-01-07 23:20:10 +01:00
bec36f5c7f
Add Pi Zero and update PIDs
2022-01-07 11:47:31 -08:00
39a239113f
Enable neopixel for status
2022-01-07 11:23:50 -08:00
3238d8364d
Piunora + full build + high speed usb
2022-01-07 11:23:50 -08:00
5f32d1f34b
Piunora pinout
2022-01-07 11:23:49 -08:00
fb6ab72392
Merge pull request #5816 from bd34n/bdmicro_vina_d51_led_aux
...
ports/atmel-samd/boards/bdmicro_vina_d51/pins.c: Add LED_AUX pin.
2022-01-07 10:47:32 -08:00
afd686986a
Merge pull request #5800 from tannewt/rpi_zero
...
Initial Pi Zero support
2022-01-07 09:05:30 -05:00
1fb4f02de2
ports/atmel-samd/boards/bdmicro_vina_d51/pins.c: Add LED_AUX pin.
2022-01-06 16:32:17 -05:00
fa272f5a70
Fix iMX and zero_w build extension
2022-01-06 10:24:02 -08:00
2a2f94df15
Update tinyusb for zero support
2022-01-06 08:52:33 -08:00
12046323a2
Fixed unit port build issue
2022-01-06 09:27:44 +01:00
48d826b15d
Never reset SD card pins
2022-01-04 19:08:14 -08:00
38d2472683
Fix cache detection on 64 bit
2022-01-04 17:38:29 -08:00
f64fede735
Correct board name and fix USB with memory barrier
2022-01-04 16:11:40 -08:00
87f4205ec9
Fix Cortex-A MMU init
2022-01-04 12:29:48 -08:00
Dan Halbert
Jeff Epler
0hotpotman0
Neradoc
Dan Halbert
Scott Shawcroft
Scott Shawcroft
Jeff Epler
Michael Himing
Kattni
Chris Wesseling
arturo182
Pontus Oldberg
Chris Wesseling
Brian Dean
EmergReanimator