From a version numbering point of view this is a downgrade (2.17.0 ->
2.16.x). However the latest commit for version 2.17.0 is from March 2019
and no further minor release happened after 2.17.0. This version is EOL.
2.16.x though is still actively maintained as a long term release, hence
security and stability fixes are still being backported, including
compatibility with upcoming compiler releases.
This allows the user to enable wake-up sources using the EWUP bits, on F7
MCUs.
Disabling the wake-up sources while clearing the wake-up flags follows the
reference manual and ST examples.
state.reset_mode is updated by `MICROPY_BOARD_BEFORE_SOFT_RESET_LOOP` but
not passed to `init_flash_fs`, and so factory reset is not executed on
boards that do not have a bootloader. This bug was introduced by
4c3976bbcaFixes#6903.
A corrupt filesystem may lead to a request for a block which is out of
range of the block device limits. Return an error instead of passing the
request down to the lower layer.
Two of the defaults have also changed in this commit:
- MICROPY_HW_RFCORE_BLE_LSE_SOURCE changed from 1 to 0, which configures
the LsSource to be LSE (needed due to errata 2.2.1).
- MICROPY_HW_RFCORE_BLE_VITERBI_MODE changed from 0 to 1, which enables
Viterbi mode, following all the ST examples.
Signed-off-by: Damien George <damien@micropython.org>
Instead of raising a ZeroDivisionError, this tool now just skips any
elements in the DFU file that have zero size.
Signed-off-by: Damien George <damien@micropython.org>
These ports already have uzlib enabled so this additional ubinascii.crc32
function only costs about 90 bytes of flash.
Signed-off-by: Damien George <damien@micropython.org>
This allows a port to specify a custom qstrdefsport.h file, the same as the
QSTR_DEFS variable in a Makefile.
Signed-off-by: Damien George <damien@micropython.org>
Add LPUART1 as a standard UART. No low power features are supported, yet.
LPUART1 is enabled as the next available UART after the standard U(S)ARTs:
STM32WB: LPUART1 = UART(2)
STM32L0: LPUART1 = UART(6)
STM32L4: LPUART1 = UART(6)
STM32H7: LPUART1 = UART(9)
On all ports: LPUART1 = machine.UART('LP1')
LPUART1 is enabled by defining MICROPY_HW_LPUART1_TX and
MICROPY_HW_LPUART1_RX in mpconfigboard.h.
Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
Previously, the MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE macro
controlled enabling both the central mode and the GATT client
functionality (because usually the two go together).
This commits adds a new MICROPY_PY_BLUETOOTH_ENABLE_GATT_CLIENT
macro that separately enables the GATT client functionality.
This defaults to MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE.
This also fixes a bug in the NimBLE bindings where a notification
or indication would not be received by a peripheral (acting as client)
as gap_event_cb wasn't handling it. Now both central_gap_event_cb
and peripheral_gap_event_cb share the same common handler for these
events.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This commit fixes two issues on the esp32:
- it enables machine.soft_reset() to be called in main.py;
- it enables machine.reset_cause() to correctly identify a soft reset.
The former is useful in that it enables soft resets in applications that
are started at boot time. The support is patterned after the stm32 port.
This commit implements basic NVS support for the esp32. It follows the
pattern of the esp32.Partition class and exposes an NVS object per NVS
namespace. The initial support provided is only for signed 32-bit integers
and binary blobs. It's easy (albeit a bit tedious) to add support for
more types.
See discussions in: #4436, #4707, #6780
This enables -Os for compilation, but still keeps full assertion messages.
With IDF v4.2, -Os changes the GENERIC firmware size from 1512176 down to
1384640, and the GENERIC_SPIRAM firmware is now 1452320 which fits in the
allocated partition.
Signed-off-by: Damien George <damien@micropython.org>
So that mboot can be used to program encrypted/signed firmware to regions
of flash that are not the main application, eg that are the filesystem.
Signed-off-by: Damien George <damien@micropython.org>
The default for these is to enable them, but they can now be disabled
individually by a board configuration.
Signed-off-by: Damien George <damien@micropython.org>
If a board defines USBD_VID then that will be used instead of the default.
And then the board must also define all USBD_PID_xxx values that it needs.
Signed-off-by: Damien George <damien@micropython.org>
Zephyr controllers can be queried for a static address (computed from the
device ID). BlueKitchen already supports this, but make them both use the
same macro to enable the feature.
The following simple usocket example throws an error EINVAL on connect
import usocket
s = usocket.socket()
s.connect(usocket.getaddrinfo('www.micropython.org', 80)[0][-1])
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
OSError: [Errno 22] EINVAL
Fixing the context parameter in calls of net_context_get_family() and
net_context_get_type(), the connect works fine.
Tested on a nucleo_h743zi board.
Updates the zephyr docker image to the latest, v0.11.13. This updates CI
to use zephyr SDK v0.12.2 and GCC v10.2.0 for the zephyr port.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the zephyr build infrastructure to build MicroPython as a
cmake target, using the recently introduced core cmake rules.
This change makes it possible to build the zephyr port like most other
zephyr applications using west or cmake directly. It simplifies building
with extra cmake arguments, such as specifying an alternate conf file or
adding an Arduino shield. It also enables building the zephyr port
anywhere in the host file system, which will allow regressing across
multiple boards with the zephyr twister script.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Disables frozen source modules in the zephyr port. They are deprecated
in the makefile rules and not implemented in the new cmake rules.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The core cmake rules use custom commands to invoke qstr processing
scripts. For the zephyr port, it's possible that list arguments to these
commands may contain generator expressions, therefore we need to expand
them properly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This allows customising which features can be enabled in a frozen library.
e.g. `include("path.py", extra_features=True)`
in path.py:
options.defaults(standard_features=True)
if options.standard_features:
# freeze standard modules.
if options.extra_features:
# freeze extra modules.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is a MicroPython-extension that allows for code running in IRQ
(hard or soft) or scheduler context to sequence asyncio code.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
On error, the handle is only available on err->att_handle rather than
in attr->handle used in the non-error case.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
