f13e6d8758
update flash chip for Metro M7 1011
2023-02-03 11:56:42 -05:00
aafec496c3
Merge pull request #7539 from DavePutz/issue_7419
...
Correct assignment of RMT channels on ESP32C3
2023-02-02 17:35:37 -05:00
750535d4af
Correct assignment of RMT channels on ESP32C3
2023-02-02 14:55:57 -06:00
77c6daf4b8
don't throw exception
2023-02-01 16:33:22 -08:00
d9d94eacca
run updated pre-commit
2023-02-01 13:38:41 +05:30
9ab0733a28
Merge pull request #7530 from BrainBoardz/main
...
BrainBoardz Neuron Commit (Final I Hope!) - Updated as Per Previous Instructions VID+PID Work
2023-01-31 23:33:34 -05:00
2656ccffe4
Commit01-31
2023-01-31 19:35:57 -05:00
2faa8a435a
Merge pull request #7510 from BPI-STEAM/CircuitPython-main
...
Update mpconfigboard.h with LED definition for BPI-Bit-S2.
2023-01-31 16:08:10 -05:00
e1041a8625
Merge pull request #7509 from RetiredWizard/seeedc3
...
seeed_xiao_esp32c3 flash mode change to dio
2023-01-31 11:29:24 -08:00
b8d6f20308
Add front buttons as D0/1/2, matching the silk
2023-01-31 10:02:21 -06:00
f3b1ceeb81
Seventh Commit
2023-01-30 20:45:57 -05:00
f71b4bc018
Sixth Commit
2023-01-30 20:32:19 -05:00
e10816f34c
Fifth Commit
2023-01-30 20:20:37 -05:00
3f3519e0ab
Fourth Commit
2023-01-30 20:10:34 -05:00
7c525fdcb0
Third Commit
2023-01-30 19:54:11 -05:00
34f480d735
Second Commit
2023-01-30 19:03:57 -05:00
d6ebf1bf43
First commit
2023-01-30 17:12:21 -05:00
6e31cd0a4f
Update mpconfigboard.h
2023-01-30 15:41:42 +08:00
dc5cd27555
seeed_xiao_esp32c3 flash mode change to dio
...
I was having trouble flashing CircuitPython to the Seeed xiao
esp32c3 using the make flash option. With the help of DAN and
Neradoc I was able to perform a manual flash and use the make
flash option to flash an Adafruit_qtpy_esp32c3 bin but when I
went back and attempted to use make flash on the seeed bin it didn't
work. Comparing the builds, the flash mode was different and after
making this change the seeed build now flashes properly using make
flash.
2023-01-30 02:01:33 -05:00
f7167bd735
Merge pull request #5999 from anecdata/ESP32-S3-DevKitC-1-N32R8
...
Espressif ESP32-S3 DevKitC-1-N32R8
2023-01-29 10:27:08 +05:30
858e212e34
enable octal flash in sdkconfig
2023-01-29 00:23:02 +05:30
7522522a0a
Merge pull request #7501 from pypewpew/pewpewm4-cdc
...
pewpew m4: enable CDC back
2023-01-28 12:00:49 -05:00
5b814a4561
pewpew m4: enable CDC back
...
CDC got disabled on this board by mistake
2023-01-28 17:20:22 +01:00
401d160c58
opi flash needs to be flashed in dout
2023-01-28 11:04:21 +05:30
cda5689263
move `esp32_camera` to `espcamera`
2023-01-27 22:05:43 +05:30
a7b12de6ee
Merge pull request #7473 from MicroDev1/espulp
...
Add ULP FSM
2023-01-26 09:57:35 -08:00
bfb77d0544
move `ULPArch` to `Architecture`
2023-01-26 13:01:14 +05:30
a6861adb1f
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8
2023-01-26 11:21:43 +05:30
e5cfab060d
remove redundant config messages
2023-01-26 11:20:18 +05:30
90e8f9d4a8
fix espressif 32MB partition table
2023-01-26 11:19:22 +05:30
5fb0333aa9
Merge pull request #7478 from jepler/fix-esp32s3-reverse-tft-pid
...
Feather ESP32-S2 Reverse TFT: Update PID to match internal list
2023-01-25 21:24:00 -05:00
ace2062564
remove board that will not be manufactured
2023-01-25 15:10:06 -06:00
19c1eb2d1d
update esp-idf from latest release/v4.4
2023-01-25 15:44:43 -05:00
f56a6a92f4
Merge pull request #7474 from RetiredWizard/broadcomRTC
...
Broadcom port: Add 'fake' RTC support
2023-01-25 11:33:17 -08:00
9487fb51a4
prettify espressif partition tables
2023-01-25 19:40:14 +05:30
ecde85734c
Remove a couple unneeded includes.
2023-01-23 15:17:24 -05:00
fb4def2824
remove CIRCUITPY_RTC = 1 from mpconfigport.mk
...
Full build includes the RTC bits so don't need to enable it
in ports/broadcom/mpconfigport.mk
2023-01-23 14:52:20 -05:00
43b1d2618e
Remove erroneous left over comment
2023-01-23 14:19:27 -05:00
e018c6d022
Update PID to match internal list
2023-01-23 13:13:27 -06:00
4f830f1bbb
Fix parameter name and remove unnecessary function
2023-01-21 22:57:52 -05:00
3361ec390d
Broadcom port: Add 'fake' RTC support
...
The Broadcom chips apparently don't have an RTC, so this PR uses the
timer to add dummy RTC responses and allow resonable results
from time.localtime() as well as setting the time and date while
the board is powered.
2023-01-21 22:19:10 -05:00
2bb12293f8
add ulp fsm
2023-01-21 17:44:08 +05:30
13338df9f1
Merge pull request #7462 from tannewt/fix_rp2_reset_reason
...
Tweak RP2040 reset reason
2023-01-19 21:10:57 -05:00
f826904995
Merge pull request #7468 from DavePutz/issue_6975
...
Fixes for microcontroller.on_next_reset() on NRF
2023-01-19 19:03:46 -05:00
a30f69aaed
Fixes for microcontroller.on_next_reset() on NRF
2023-01-19 15:58:03 -06:00
8f9d1e241d
Save watch_for_interrupt_char to espressif too
2023-01-19 10:28:56 -08:00
dca66eb98c
Watch for ctrl-c over BLE workflow serial
...
Before this, it was impossible to interrupt a running program over
BLE.
2023-01-18 16:28:35 -08:00
f66e865510
Use low power RTC on mimxrt10xx (Teensy41) boards
...
There are apparently two RTC interfaces in the mimxrt10xx dev
kit. The low power interface access the battery backed up hardware.
I've tested this on the Teensy41 and it seems to
fix issue #4574
2023-01-17 23:30:36 -05:00
82a313065e
Tweak RP2040 reset reason
...
Watchdogs are used to reboot out of the bootloader. There is a
scratch register for user watchdogs. So use sdk functions to better
distinguish these.
Related to #7346
2023-01-17 16:12:08 -08:00
683e393878
Add comments for MDNS code
2023-01-17 14:07:30 -08:00
Dan Halbert
Dan Halbert
root
Gregory Neverov
MicroDev
brainboardz
Scott Shawcroft
Jeff Epler
Wind-stormger
RetiredWizard
Radomir Dopieralski