bcf31a3908
esp8266, stmhal, zephyr: Rename machine.Pin high/low methods to on/off.
...
For consistent Pin/Signal class hierarchy. With it, Signal is a proper
(while still ducktyped) subclass of a Pin, and any (direct) usage of Pin
can be replace with Signal.
As stmhal's class is reused both as machine.Pin and legacy pyb.Pin,
high/low methods actually retained there.
2017-05-21 17:44:58 +03:00
299c0a3925
CODECONVENTIONS: Typo fix.
2017-05-21 15:58:03 +03:00
3ebd67fc09
library/machine.Pin: Remove .id() method and .board class attr.
...
Both aren't part of generic Hardware API: It's impossible to implement
.id() method in a generic case (e.g., when Pin is instantiated by the
underlying OS/RTOS). .board attribute is an obvious space hog which
instead can be implemented on Python level if needed.
2017-05-21 15:50:16 +03:00
19e065294d
cc3200/mods/pybpin: Remove toggle() method.
...
It's not part of MicroPython HW API and can be easily implemented on Python
level in case of need.
Saved 56 bytes of binary.
2017-05-21 15:39:27 +03:00
338f0849d9
py/mkenv.mk: Use $(TOP) instead of ".." to reference tools, mpy-cross.
2017-05-19 15:53:55 +10:00
436d97b3f9
docs/library/machine.UART: Update and improve uart.any() docs.
2017-05-19 15:48:22 +10:00
aca898eeb0
esp8266/machine_uart: Add uart.any() method.
...
Returns 0 or 1, corresponding to no or at least 1 char waiting.
2017-05-19 15:48:22 +10:00
218a876f97
tests/basics/builtin_range: Add tests for negative slicing of range.
2017-05-18 17:32:42 +10:00
03659c51ca
py/objrange: Fix slicing of range when step of slice is negative.
2017-05-18 17:32:42 +10:00
e1b0f2a16f
tests/basics/list_slice_3arg: Add more tests for negative slicing.
2017-05-18 17:32:42 +10:00
eb4c37f7a4
py/sequence: Fix boundary errors when slicing with a negative step.
2017-05-18 17:32:42 +10:00
d007351b33
docs/library/micropython: Document the newer micropython functions.
2017-05-18 00:25:09 +10:00
55dd83a7ba
drivers/display/lcd160cr_test: Allow test to take orientation parameter.
2017-05-17 19:54:38 +10:00
f351c6db5e
drivers/display/lcd160cr: Fix get_line method and enhance screen_dump.
...
The docs are updated and describe the new behaviour of these methods.
2017-05-17 19:53:13 +10:00
e4a53570d0
docs: Change single occurrence of "Micropython" to "MicroPython".
2017-05-17 12:38:33 +10:00
0af974b777
examples/hwapi/soft_pwm2_uasyncio: Update for call_later_ms().
...
Following finalized naming in uasyncio.
2017-05-17 00:44:00 +03:00
0912334f54
zephyr/modusocket: getaddrinfo: Use RAISE_ERRNO for proper error decoding.
2017-05-17 00:21:22 +03:00
5f648ff60e
zephyr/main: Check default netif before applying operations to it.
...
If no network driver is enabled (e.g., it doesn't exist for a particular
board), it will be NULL.
2017-05-17 00:17:53 +03:00
aa9ce283c2
zephyr/modusocket: Get rid of cur_pkt object member.
...
Instead, just peek a packet at the head of the queue and work with it.
2017-05-16 13:46:54 +03:00
a3008e447c
zephyr/modusocket: First step to switch to alternative FIFO processing.
...
Here we wait for non-empty FIFO, and then directly access/drop its head
element.
2017-05-16 13:43:06 +03:00
88c51c3592
tools/mpy-tool.py: Fix regression with freezing floats in obj repr C.
...
Regression was introduced by ec534609f6
2017-05-16 18:53:02 +10:00
a004554dc1
stmhal/modmachine: Remove TODO comment that is now implemented.
2017-05-16 17:44:14 +10:00
37bd3b4f4c
stmhal/modmachine: Add machine.UART class, linking to pyb.UART.
...
pyb.UART has a superset of machine.UART functionality so can be used to
provide compatibility with other ports that also implement machine.UART.
2017-05-16 17:40:22 +10:00
4b235800a4
esp8266/modnetwork: In connect, fix potential buffer overflows.
2017-05-16 17:30:45 +10:00
162a0f942b
tests/io/bytesio_ext: Test read() after seek() past end of BytesIO object.
2017-05-15 23:58:06 +03:00
53461deb04
py/objstringio: Fix StringIO reads at or beyond EOF.
...
Existing code failed if seek() went past EOF (which is acceptable when writing).
2017-05-15 23:58:04 +03:00
d5713c8618
docs/library/index: Add important summary of the intro section as warning.
...
To make them harder to miss.
2017-05-15 00:26:44 +03:00
0ba136fbe9
docs/machine.Signal: Add initial draft description of Signal class.
2017-05-14 23:12:06 +03:00
c19f07bd52
docs/machine.Pin: There's no toggle() method in MicroPython hardware API.
...
May be a port-specific method, not portable, not part of the official
specification.
2017-05-14 22:52:16 +03:00
f06d0839bd
py/modsys: update conditionals for code referencing sys.stdout
...
Working on a build with PY_IO enabled (for PY_UJSON support) but PY_SYS_STDFILES disabled (no filesystem). There are multiple references to mp_sys_stdout_obj that should only be enabled if both PY_IO and PY_SYS_STDFILES are enabled.
2017-05-14 18:24:50 +03:00
55491031be
tools/mpy_cross_all.py: Helper tool to run mpy-cross on the entire project.
2017-05-14 17:51:12 +03:00
0c57979ce2
zephyr/modusocket: Implement getaddrinfo().
2017-05-13 16:42:35 +03:00
86c4544ef9
zephyr/modusocket: If there're no packets in recv_q, cancel waiter.
...
This solves a case when socker_read() has blocked on fifo, and then peer
closed event arrives.
2017-05-13 16:22:14 +03:00
69f0b4ad5b
zephyr/modusocket: Switch to net_pkt_append() returning length.
...
Requires patch in review.
2017-05-13 16:05:10 +03:00
39d3335606
zephyr/modusocket: Update for net_pkt refactor.
2017-05-13 15:47:47 +03:00
c022c9a2f0
zephyr/modusocket: Wrap pkt_get_info() call.
...
The most important info it returns are numbers of free buffers
in different pools (rx/tx packet headers, data fragments).
2017-05-13 15:23:31 +03:00
054a381d7c
tests/extmod/vfs_fat_more: Make skippable is uos is not available.
...
Fixes Zephyr tests.
2017-05-13 14:13:53 +03:00
cda09727b4
tests/extmod/vfs_fat: Add test for ilistdir of a non-existent directory.
2017-05-13 19:10:15 +10:00
f95e4e7782
extmod/vfs_fat_misc: Remove dot-dirs filter since FatFS already does it.
2017-05-13 18:58:46 +10:00
71df60cf42
esp8266/ets_alt_task.c: Prevent spurious large increment of ticks_ms()
...
This happened when the overflow counter for ticks_ms() was interrupted
by an external hard interrupt (issue #3076 ).
2017-05-13 17:56:16 +10:00
ec534609f6
tools/mpy-tool.py: Use MP_ROM_xxx macros to support nanbox builds.
2017-05-13 10:08:13 +10:00
5383a50072
zephyr/README: Update to require Zephyr 1.8.
...
There're a lot of changes and fixes in 1.8 regarding IP stack,
incompatible with previous Zephyr versions, so supporting them
doesn't make sense.
This is the last commit which should build with Zephyr 1.7.
2017-05-12 22:05:07 +03:00
d57c6564dc
zephyr/prj_qemu_x86.conf: Bump RAM size to 320K.
2017-05-12 21:58:51 +03:00
50d7ed325a
zephyr/modusocket: Add SOL_SOCKET and SO_REUSEADDR constants.
2017-05-12 21:55:42 +03:00
1659c0645d
zephyr/modusocket: Add dummy setsockopt() implementation.
2017-05-12 21:54:32 +03:00
a4e38db30d
unix: Move upip to frozen bytecode dir.
...
For x86_64 build, this saves only 128 bytes on the final executable
size, but still an improvement.
2017-05-12 18:32:25 +03:00
5c312861a6
unix/Makefile: Enable frozen bytecode modules dir.
2017-05-12 18:31:22 +03:00
ddf0b7dbc3
esp8266/scripts: Move initsetup & port_diag tools to modules/.
2017-05-12 17:58:50 +03:00
e9308c189a
esp8266/scripts: Move drivers/modules to modules/ (frozen bytecode).
2017-05-12 17:57:23 +03:00
5f7ce2a1ca
esp8266/modules/flashbdev: Reserve one sector for native code storage.
2017-05-12 16:08:54 +03:00
Paul Sokolovsky
Damien George
puuu
Tom Collins
Robert HH