Spurious fix as the logic is structured such that these variables will be
set before dereferenced, but this keeps Ruff happy (no more F821
undefined-name).
Signed-off-by: Angus Gratton <angus@redyak.com.au>
Otherwise `mpremote soft-reset` will implicitly run the repl command.
Fixes issue #10871.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Ruff version 283 expanded E721 to fail when making direct comparison
against a built-in type. Change the code to use isinstance() as
suggested, these usages appear to have equivalent functionality.
Signed-off-by: Angus Gratton <angus@redyak.com.au>
On esp32, the build output consists of:
- micropython.elf
- micropython.map
- micropython.bin -- application only
- micropython.uf2 -- application only
- firmware.bin -- bootloader, partition table and application
Currently everything is available at the download page except
micropython.bin. This commit adds that file but with the extension changed
to .app-bin, to distinguish it from .bin (the full thing).
Signed-off-by: Damien George <damien@micropython.org>
This will be replaced with a new deflate module providing the same
functionality, with an optional frozen Python wrapper providing a
replacement zlib module.
binascii.crc32 is temporarily disabled.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This change enables the ULP (FSM) for all ESP32 variants rather than
requiring it to be enabled for each board specifically.
It also ensures the correct header file is included for each variant.
Lastly, it updates the IDF version we're builing against to v4.4.2, as that
version contains important fixes to make the ULP actually work on S2/S3
chips. See: https://github.com/espressif/esp-idf/commit/a0e3d48
Signed-off-by: Wilko Nienhaus <wilko.nienhaus@gmail.com>
The automatic code size build and GitHub comment is a really useful
feature. This commit adds a few more builds to it (mimxrt and samd).
Signed-off-by: Damien George <damien@micropython.org>
This is a MicroPython-specific module that existed to support the old
version of uasyncio. It's undocumented and not enabled on all ports and
takes up code size unnecessarily.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Applies to drivers/examples/extmod/port-modules/tools.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Updates any includes, and references from Makefiles/CMake.
This essentially reverts what was done long ago in commit
136b5cbd76
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This commit just takes the necessary parts of pyboard.py and merges them
with pyboardextended.py to make a new transport_serial.py, and updates the
rest of mpremote to use this instead.
It is difficult to continue to add features to mpremote (which usually
requires modification to pyboard.py) while also maintaining backwards
compatibility for pyboard.py.
The idea is that this provides a starting point for further refactoring of
mpremote to allow different transports (webrepl, BLE, etc).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Changes in this commit:
- Add a extra detail to each of the commands.
- Add more about handling options and arguments.
- Include shortcut commands that behave like real commands to the command
list (e.g. bootloader, rtc).
- Add extra information and reword to address common misconceptions, in
particular how commands chain together.
- Add additional examples showing some more interesting combinations.
- Add descriptions to each of the examples.
- Add pipx installation instructions.
- Describe how user-configuration works.
This work was sponsored by Google Season of Docs.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Replaces the existing functionality provided by the `setrtc` alias to use
the current time, rather than a hard-coded date/time.
Use `rtc` to query the current time. Use `rtc --set` to set it.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
For example, the `reset` shortcut previously allowed an optional delay, but
the argument handling cannot handle `reset next-command` as `next-command`
will be interpreted as the delay argument. The fix in this commit allows
`reset + next-command`.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This allows the sequence to be paused (e.g. wait for device, etc).
Also removes the t_ms arg in reset/bootloader, because these arguments
don't really need to be changed, and keeping them would mean inconsistent
units used for time delays.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This commit adds the "--escape-non-printable" option to the repl command.
When specified the REPL console will escape non-printable characters,
printing them as their hex value in square brackets.
This escaping behaviour was previously the default and only behaviour, but
it is now opt-in.
As part of this change, the speed of echoing device data to the console is
improved by by reading and writing in chunks.
Signed-off-by: Damien George <damien@micropython.org>
Changes in this commit:
- Change MICROPY_HW_BOARD_NAME definition to match the product name.
- Rename board folder's name to match the product name style.
- Change related files like Makefile, document descriptions, test cases, CI
and tools.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
- Use HCI_TRACE macro consistently.
- Use the same colour formatting.
- Add a tool to convert to .pcap for Wireshark.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
The mpremote REPL can now be closed with either ctrl+] or ctrl+x, which
gives users a choice, useful if the ']' key is difficult to access.
Fixes issue #11197.
Signed-off-by: Jonas Scharpf <jonas@brainelectronics.de>
This adds a new MODE_PYPROJECT, which gives basic support to allow
packaging a small subset of micropython-lib packages to PyPI.
This change allows a package in micropython-lib to:
- Add a "pypi" name to its metadata indicating that it's based on a PyPI
package.
- Add "stdlib" to its metadata indicating that it's a micropython version
of a stdlib package.
- Add a "pypi_publish" name to its metadata to indicate that it can be
published to PyPI (this can be different to the package name, e.g. "foo"
might want to be published as "micropython-foo").
When a package requires() another one, if it's in MODE_PYPROJECT then if
the package is from pypi then it will record that as a pypi dependency
instead (or no dependency at all if it's from stdlib).
Also allows require() to explicitly specify the pypi name.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This is a follow up to d263438a6e, which
solved one problem (reset on disconnect) but introduced a second one (hang
in bootloader).
To solve both probles, False/False is needed for DTR/RTS for ESPxx, but
that would then block stm32 and others. Any unconditional combination of
DTR/RTS ends up blocking normal operation on some type of board or another.
A simple overview (for windows only):
DTR CTS ESP8266/ESP32 STM32/SAMD51/RP2040
unspecified unspecified Reset on disconnect OK
True False Hang in bootloader OK
False False OK No Repl
True True Reset on disconnect No Repl
False True Reset on disconnect No Repl
serial.manufacturer: wch.cn/Silicon Labs Microsoft
serial.description: USB-SERIAL CH340 / USB Serial Device
CP210x USB to UART
Bridge
The updated logic will only set the DTR/RTS signals for boards that do not
use standard Microsoft drivers (based on the manufacturer). It would also
be possible to check against a list of known driver manufactures (like
wch.cn or Silicon Labs) but this would require a list of known drivers for
all ports.
Signed-off-by: Jos Verlinde <jos_verlinde@hotmail.com>
Currently, certain mpremote filesystem operations can fail on Windows due
to a mixing of '/' and '\' for path separators. Eg if filesystem_command()
is called with a destination that ends in / then dest.endswith(os.path.sep)
will return False, which gives the wrong behaviour (it does end in a path
separator).
For similar reasons to 7e9a15966a, it's best
to use '/' everywhere in pyboard.py and mpremote, because the target device
understands only '/'. mpremote already does this, so the remaining place
to fix it is in pyboard.y, to convert all incoming paths to use '/' instead
of '\'.
This effectively reverts 57fd66b80f which
tried to fix the problem in a different way.
See also related 1f84440538.
Signed-off-by: Damien George <damien@micropython.org>
Angus Gratton
Jim Mussared
Jos Verlinde
Daniël van de Giessen
Damien George
Wilko Nienhaus
Christian Clauss
Takeo Takahashi
Jonas Scharpf