Commit Graph

2824 Commits

Author SHA1 Message Date
Damien George
bb4c6f35c6 py: Make MP_OBJ_NEW_SMALL_INT cast arg to mp_int_t itself.
Addresses issue #724.
2014-07-31 10:49:14 +01:00
Damien George
fa1ecda3fd stmhal, accel: Increase start-up times to 30ms; add extra 30ms delay.
For accel to start-up reliably, need to wait 30ms between on/off, and
30ms for it to enter active mode.  With this fix the accel can be read
immediately after initialising it.

Addresses issue #763.
2014-07-31 10:39:52 +01:00
Damien George
3c4db9f91c stmhal: Add USB_VCP class/object, for direct USB VCP control.
Before, pyb.stdin/pyb.stdout allowed some kind of access to the USB VCP
device, but it was basic access.

This patch adds a proper USB_VCP class and object with much more control
over the USB VCP device.  Create an object with pyb.USB_VCP(), then use
this object as if it were a UART object.  It has send, recv, read,
write, and other methods.  send and recv allow a timeout to be specified.

Addresses issue 774.
2014-07-31 10:30:42 +01:00
Damien George
5f27a7e811 py: Add mp_obj_str_builder_end_with_len.
This allows to create str's with a smaller length than initially asked
for.
2014-07-31 10:29:56 +01:00
Damien George
94fbe9711a py: Change lexer stream API to return bytes not chars.
Lexer is now 8-bit clean inside strings.
2014-07-30 11:46:05 +01:00
Damien George
07133415d2 Merge pull request #738 from dhylands/except-args
Add support for storing args during an exception raised by an irq.
2014-07-29 23:15:35 +01:00
Paul Sokolovsky
d0f5e61ab5 py: Implement __file__ attribute for modules. 2014-07-28 21:21:59 +03:00
Paul Sokolovsky
645582fe14 py: Make id() return small int for the most common address space mapping.
Many OSes/CPUs have affinity to put "user" data into lower half of address
space. Take advantage of that and remap such addresses into full small int
range (including negative part).

If address is from upper half, long int will be used. Previously, small
int was returned for lower quarter of address space, and upper quarter. For
2 middle quarters, long int was used, which is clearly worse schedule than
the above.
2014-07-28 21:21:59 +03:00
Damien George
adf0f2ae1a py: Change stream protocol API: fns return uint; is_text for text. 2014-07-27 22:38:58 +01:00
Dave Hylands
5b7fd20fea Add support for storing args during an exception raised by an irq.
The user code should call micropython.alloc_emergency_exception_buf(size)
where size is the size of the buffer used to print the argument
passed to the exception.

With the test code from #732, and a call to
micropython.alloc_emergenncy_exception_buf(100) the following error is
now printed:
```python
>>> import heartbeat_irq
Uncaught exception in Timer(4) interrupt handler
Traceback (most recent call last):
  File "0://heartbeat_irq.py", line 14, in heartbeat_cb
NameError: name 'led' is not defined
```
2014-07-25 14:00:06 -07:00
Damien George
05c255f039 Merge pull request #771 from dhylands/gitignore-GNUmakefile
Add GNUmakefile to the .gitignore file.
2014-07-24 14:32:20 +01:00
Damien George
ffe911d228 py: Make long ints hashable.
Addresses issue #765.
2014-07-24 14:21:37 +01:00
Dave Hylands
1bbdd4ed2a Add GNUmakefile to the .gitignore file. 2014-07-24 00:09:56 -07:00
Paul Sokolovsky
4ecb700fe3 streams: Treat non-error output size as unsigned. 2014-07-23 00:25:46 +03:00
Paul Sokolovsky
e1b1abc1e8 stream: Revert to checking for the correct error value. 2014-07-23 00:23:44 +03:00
Damien George
de993f4573 Merge pull request #766 from dhylands/allow-dfu-override
Allow DFU_UTIL to be overridden from the environment.
2014-07-22 11:02:59 +01:00
Damien George
7cfae9693b Merge pull request #746 from blmorris/master
Enable 16-bit memory addresses for i2c.mem_read and i2c_mem_write
2014-07-22 11:01:42 +01:00
Damien George
3e0bce3587 Merge pull request #767 from dhylands/fix-short-read
Deal with reading a buffer less than what was allocated.
2014-07-22 11:01:24 +01:00
blmorris
7a03b5f56a remove Myriad2 board config files from master 2014-07-21 23:12:07 -04:00
blmorris
86f0b31bcf Change boolean 'use_16bit_addr' to int 'addr_size', can be either 8 or 16 bits, default value is 8
to maintain compatibility with existing code.
2014-07-21 22:45:04 -04:00
Dave Hylands
1d8816c36b Deal with reading a buffer less than what was allocated.
With this fix, file_long_read now passes.
2014-07-21 19:10:10 -07:00
Dave Hylands
a2e7a1315d Allow DFU_UTIL to be overridden from the environment. 2014-07-21 16:28:07 -07:00
Paul Sokolovsky
512465bc66 tests: Add testcase for read by length past EOF.
Currently broken for unicode input streams.
2014-07-22 00:11:37 +03:00
blmorris
721d6240c9 Merge https://github.com/blmorris/micropython into Myriad2 2014-07-21 12:50:10 -04:00
blmorris
4038f513ea Merge https://github.com/micropython/micropython 2014-07-21 12:47:57 -04:00
Damien George
951ed9d02f stmhal: Fix REPL printing by cooking output sent to stdout_obj.
Recent changes to builtin print meant that print was printing to the
mp_sys_stdout_obj, which was sending data raw to the USB CDC device.
The data should be cooked so that \n turns into \r\n.
2014-07-20 13:57:43 +01:00
Damien George
1163cb9cb5 stmhal: Change calls to pfenv_printf to pfenv_vprintf.
Fixes printing bugs introduced by
cb66f41ebc.
2014-07-20 13:10:18 +01:00
Paul Sokolovsky
cb66f41ebc py: Make print() accept "file" argument, and actually print to stream.
And not system printf(), like it was before. For this, move pfenv_printf()
from stmhal port to py/.
2014-07-19 21:27:22 +03:00
Damien George
04c9fec7d1 Merge pull request #757 from stinos/windows-fsync
Add fsync for windows, i.e. _commit. See dce8876
2014-07-19 18:40:49 +01:00
Damien George
2c0701101b Merge pull request #759 from micropython/unicode-read-chars
py: Add stream reading of n unicode chars; unicode support by default.
2014-07-19 18:38:28 +01:00
Damien George
1694bc733d py: Add stream reading of n unicode chars; unicode support by default.
With unicode enabled, this patch allows reading a fixed number of
characters from text-mode streams; eg file.read(5) will read 5 unicode
chars, which can made of more than 5 bytes.

For an ASCII stream (ie no chars > 127) it only needs to do 1 read.  If
there are lots of non-ASCII chars in a stream, then it needs multiple
reads of the underlying object.

Adds a new test for this case.  Enables unicode support by default on
unix and stmhal ports.
2014-07-19 18:34:04 +01:00
Damien George
02bc882c3d stmhal: Add file.flush and os.stat. 2014-07-19 16:39:13 +01:00
blmorris
0f4ee2e44a Merge https://github.com/micropython/micropython 2014-07-18 16:06:22 -04:00
Damien George
5467186b0e py: Remove unnecessary argument in bytearray print. 2014-07-17 21:56:32 +01:00
Paul Sokolovsky
e3737b858a formatfloat.c: Typo fix in comment. 2014-07-17 20:45:58 +03:00
Damien George
a4022c92f0 py, inline asm: Change "and" op name to "and_" to avoid keyword clash.
Addresses issue #753.
2014-07-17 12:37:56 +01:00
Damien George
a50494ab68 Merge pull request #755 from dhylands/teensy-core
Add teensy core files and use same toolchain as stmhal
2014-07-17 12:30:44 +01:00
Damien George
db56ad2915 Merge pull request #754 from dhylands/fix-teensy
Fix teensy to build on latest tree.
2014-07-17 12:26:35 +01:00
stijn
73ab8cc21d Add fsync for windows, i.e. _commit. See dce8876 2014-07-16 09:37:09 +02:00
blmorris
ef204733d6 Initial commit of Myriad2 board-specific configuration files 2014-07-15 15:10:56 -04:00
blmorris
0429d35f37 Merge https://github.com/micropython/micropython 2014-07-15 12:28:49 -04:00
Dave Hylands
04f5ae1d1c Add core files and use same toolchain as stmhal 2014-07-14 22:48:22 -07:00
Dave Hylands
4d9dd26818 Fix teensy to build on latest tree.
Put #include of mpconfig.h before misc.h
Replace uses of ARRAY_SIZE with MP_ARRAY_SIZE
2014-07-14 22:19:27 -07:00
Paul Sokolovsky
dce8876dbe unix: file: No fsync() on Windows. 2014-07-13 23:34:35 +03:00
Paul Sokolovsky
ac736f15c9 stream: Factor out mp_stream_write() method to write a memstring to stream. 2014-07-13 23:14:32 +03:00
Paul Sokolovsky
122c9db3db unix: file: Implement .flush() method.
This method apparently should be part of stream interface.
2014-07-13 23:14:24 +03:00
Paul Sokolovsky
a1760a56ff test: Add run-tests-exp.sh, script to run testsuite with only sh dependency.
This script uses expected test results as generated by run-tests --write-exp,
and requires only standard unix shell funtionality (no bash). It is useful
to run testsuite on embedded systems, where there's no CPython and Bash.
2014-07-13 18:49:56 +03:00
Paul Sokolovsky
b82f34edde unix: Allow to disable MICROPY_EMIT_X64 from commandline.
emitnative in particular requires nlr_* to be real functions, so doesn't
compile with MICROPY_NLR_SETJMP=1.
2014-07-13 13:49:51 +03:00
Paul Sokolovsky
2cf381081a run-tests: Add option to write CPython's test results to .exp files.
Mostly to run testsuite on targets which doesn't have CPython.
2014-07-12 16:34:51 +03:00
Paul Sokolovsky
564e46452d py: Add generic helper to align a pointer. 2014-07-12 15:57:28 +03:00