d2860b58b0
Check background pending before sleep
...
There is a race between when we run background tasks and when we
sleep. If an interrupt happens between the two, then we may delay
executing the background task. On some ports we checked this for
TinyUSB already. On iMX RT, we didn't which caused USB issues.
This PR makes it more generic for all background tasks including
USB.
Fixes #5086 and maybe others.
2021-08-19 12:18:13 -07:00
ae923db06d
Add SPEAKER_ENABLE pin to MacroPad.
2021-08-18 17:30:42 -04:00
0390f812be
Fix RP2040 I2C instance check
2021-08-18 08:55:52 -07:00
a5143d284b
Merge pull request #5161 from ZodiusInfuser/patch_micropy
...
Removed unnecessary defines from Pimoroni board files
2021-08-17 12:40:12 -07:00
abe8638f41
Merge pull request #5160 from ZodiusInfuser/patch_tiny2040
...
Removed default UART, SPI and I2C from Tiny2040 config
2021-08-16 14:54:52 -07:00
2255ab1486
Removed unnecessary Micropy and Ignore defines
2021-08-16 16:40:12 +01:00
5fb507c3ff
Removed default UART SPI and I2C from Tiny2040 config
2021-08-16 16:31:31 +01:00
de796e2304
Move OneWire to `onewireio` from `busio`
...
This will allow finer grained inclusion in 8.0.0
Fixes #5135
2021-08-12 10:47:14 -07:00
9c77d2653f
Merge pull request #5099 from ZodiusInfuser/main
...
Added definitions for some upcoming Pimoroni LED driver boards
2021-08-12 09:27:21 -07:00
47c8ff0570
Removed unnecessary defines
2021-08-11 23:34:20 +01:00
0632a1e681
Merge pull request #5060 from cdwilson/cdwilson/circuitpython/sparkfun-stm32f405-micromod
...
stm/boards: Add support for SparkFun STM32 MicroMod Processor board.
2021-08-11 12:19:16 -07:00
4608877c12
address review comments
2021-08-11 12:10:49 -04:00
35aac3d26b
display SPI now 10MHz; set PWM duty cycle to zero at stop to quiet output
2021-08-11 10:48:53 -04:00
24e61a7da8
Track more carefully which audio buffers to fill, based on interrupt channels
2021-08-10 22:00:09 -04:00
e587bd7dc0
Added final USB PIDs
2021-08-10 11:17:06 +01:00
e741330ca8
Consistent pin naming for SparkFun MicroMod processor boards.
2021-08-09 23:10:52 -07:00
2451c788f4
valid channels in audio_dma_stop; cleaner supervisor_ticks mgmt in keypad
2021-08-09 09:47:13 -04:00
59b89fdc5c
Fix various audio DMA issues:
...
RP2040 and SAMD51:
- Detect when DMA has finished, and stop DMA audio explicitly.
- Do not accidentally reuse `first_buffer` supplied by WaveFile or RawSample. Always realloc `first_buffer` and `second_buffer`
RP2040:
- When audio playing is stopped, write a final zero to the output register. This prevents residual PWM tones.
- Handle buffer size for 8-bit samples properly for 16-bit output.
- Fail on some edge cases (which may not be possible at the moment).
2021-08-09 09:47:13 -04:00
2cd80d1074
wip, with debugging printf's
2021-08-09 09:47:13 -04:00
fd71d924d2
partial buffer mgmt fix
2021-08-09 09:47:13 -04:00
f707fa107a
Tweaks to Interstate75 pinout
2021-08-05 15:00:47 +01:00
11ed759cf9
Tweaks to Plasma2040 pinout
2021-08-05 13:01:50 +01:00
ac4b10bcd9
It's "shared-module", not "shared-modules"
2021-08-03 10:37:47 -05:00
6663dacedb
Added board configurations for Plasma and Interstate
2021-08-03 14:01:56 +01:00
a358e5f58a
Add board-specific pico-sdk settings; set xosc multipler for Adafruit boards
2021-07-30 18:50:21 -04:00
9e54606ba1
Set output low in SIO
2021-07-28 09:00:36 -07:00
4be904fd4a
Switch to gpio mux to disable/enable pwm signal
2021-07-27 12:38:18 -07:00
e87e1d8175
Block when setting duty_cycle until the new value is taken
2021-07-27 12:37:35 -07:00
daf90aae83
Merge remote-tracking branch 'adafruit/main' into pulseout_switch
2021-07-26 18:48:59 -07:00
412eb87080
Switch to pin, frequency and duty_cycle PulseOut
...
Passing in a PWMOut still works but is deprecated. It will be
removed in CircuitPython 8.0.0
This also switches STM32 timer indices and channel indices to
0-based in our pin data rather than `- 1` everywhere. The latter is
more bug prone.
Most of the way for #3264
Tested on Metro M0, Metro M4, Feather S2, Feather nRF52840, Feather
STM32F4 and Arduino RP2040.
2021-07-26 18:35:49 -07:00
0d401e7bc8
fix whitespace on new flash chip for Arduino Nano RP2040
2021-07-24 13:22:02 -07:00
dcd5b5ab50
added Arduino Nano RP2040 Connect alternate flash chip
2021-07-24 13:12:44 -07:00
04ce6a6e8c
Check jmp_pin specified when JMP PIN opcodes used
2021-07-23 13:35:20 +02:00
8221a12cf6
Added support for specifying the JMP pin (RP2 PIO)
2021-07-22 18:39:04 +02:00
109bd2886b
Fix Arduino RP2040 flash size
...
For RP2040 boards, we now change the default flash size based on
the configured flash. We will still try to read the size from the
flash first.
Fixes #4874
2021-07-21 11:02:55 -07:00
8723a0335f
Merge pull request #5032 from DavePutz/multi_pulseout
...
Moved global variables to support multiple RP2040 PulseOuts
2021-07-21 10:26:17 -07:00
e14923028f
Merge pull request #5030 from dhalbert/update-to-raspberrypi-pico-sdk-1.2.0
...
Update pico-sdk to 1.2.0, using raspberrypi repo
2021-07-21 08:14:13 -07:00
b2d6203c63
fix formatting
2021-07-21 10:05:09 -05:00
0559fcd1c0
Moved global variables to support multiple PulseOuts
2021-07-21 09:52:17 -05:00
db0adf1253
Merge pull request #5025 from DavePutz/issue_5016
...
Turn off PWM pin during PulseOut construct
2021-07-20 17:25:10 -07:00
8fe4fa0114
Turn off PWN pin during PulseOut construct
2021-07-20 17:17:41 -05:00
0293ec261a
Update pico-sdk to 1.2.0, using raspberrypi repo
2021-07-20 17:31:29 -04:00
128bedae7e
Merge pull request #5019 from DavePutz/issue_5016
...
Ensure RP2040 pin is left low after PulseOut
2021-07-19 17:57:42 -04:00
d2f2afe57b
Merge pull request #4925 from microDev1/update-run-mode
...
Add RunMode.UF2 and update esp32s2 run-modes
2021-07-19 16:37:46 -04:00
8d79d4e5ee
Ensure pin is left low after PulseOut
2021-07-19 11:46:09 -05:00
3c25d8e2a0
Merge pull request #5013 from DavePutz/issue_5012
...
Issue #5012 - RP2040 moved globals to PulseIn object to fix multiple instances
2021-07-19 00:21:55 +05:30
43275e0b0d
Made suggested changes (mostly)
2021-07-18 12:00:37 -05:00
9ac607dffa
update run-mode
...
- add microcontroller.RunMode.UF2
- add UF2, NORMAL and BOOTLOADER run-modes to esp32s2
2021-07-18 00:00:58 +05:30
1c80696746
iFix formatting
2021-07-16 17:18:06 -05:00
588a19a1ab
Issue #5012 - Moved globals to PulseIn object to fix multiple instances
2021-07-16 15:59:08 -05:00
bba611336c
Merge pull request #4964 from DavePutz/issue_4937
...
Fix for issue #4937 - Implement minimum PulseOut time
2021-07-16 11:29:32 -07:00
eebddbb16d
Change min pulse calculation
2021-07-15 21:27:23 -05:00
c2685970af
Merge pull request #4987 from DavePutz/issue_4983
...
Fix for Issue #4983 - stop state machine before restarting
2021-07-13 12:16:33 -07:00
5c9823d8cb
Change order of operations in restart
2021-07-13 11:17:03 -05:00
490f263a41
Added code to reset SM program counter during a restart
2021-07-12 14:09:11 -05:00
9d5fbea7a3
Fix for Issue #4983 - stop state machine before restarting
2021-07-11 21:02:28 -05:00
0ea750b2d0
Fix handling of short pulses
2021-07-11 16:38:24 -05:00
25e799e51a
Add LED and GP25 for Cytron Maker Pi Pico
2021-07-09 20:49:59 -05:00
58fdf9e940
Merge pull request #4975 from DavePutz/issue_4945
...
Issue #4945 - handle multiple PulseIns
2021-07-09 11:03:16 -07:00
4046b0fb0a
Issue #4945 - handle multiple PulseIns
2021-07-08 14:09:21 -05:00
ab52a92704
Disallow ctrl-C interrupts of RP2040 SPI and PIO
2021-07-08 13:42:24 -04:00
a843b8a0d4
Merge remote-tracking branch 'adafruit/main' into rp2040-audio-and-spi-fixes
2021-07-08 08:22:21 -04:00
bd6826496c
Fix various RP2040 audio dma things: (see detailed commit message)
...
1. Check for correct error values from dma_claim_unused_channel.
2. Introduce a .stereo flag for simplicity.
3. Clarify PWM carrier frequency choice.
4. Start introducing quiescent audio value. Still need to ramp up/down.
5. Redo audio stop logic a bit.
6. Fix (unrelated) displayio dependency things.
There is still an interference problem between other DMA users and audio. Still debugging this.
2021-07-08 08:14:49 -04:00
f98ec0cfd6
Fix formatting
2021-07-06 14:43:46 -05:00
bfa777c55a
Add check for timer success
2021-07-06 14:34:15 -05:00
2519b06478
fix spi definition
2021-07-06 01:15:32 -04:00
b2e72b2912
fix formatting
2021-07-05 23:13:18 -05:00
6e4613f1a1
Fix formatting
2021-07-05 12:30:26 -05:00
9814386d2e
Fix for issue #4937 - Implement minimum pulseout time
2021-07-05 11:38:05 -05:00
33bbb8b1f4
RP2040 PWMAudioOut: Release DMA channels after play has finished.
2021-07-01 17:36:29 -04:00
b8c4f7d685
MacroPad RP2040: Add initialization for the OLED display
2021-06-29 17:38:14 +02:00
2c2d541e7c
Adding pins to match silk and other RP2040 boards.
2021-06-28 17:10:15 -04:00
061d3a16ff
Merge pull request #4911 from DavePutz/issue_4908
...
Fix for issue #4908 - pulseout leaving line high
2021-06-24 15:32:48 -07:00
836db4e4a1
Merge pull request #4816 from hierophect/rp2040-alarms
...
RP2040: add Alarm module
2021-06-24 08:15:57 -04:00
ab1d7429f1
Fix for issue #4908 - pulseout leaving line high
2021-06-23 21:09:27 -05:00
1f3d69d87c
Clean up sleep memory, mark as not-implemented
2021-06-20 17:57:51 -04:00
268717e427
ParallelImageCapture: Switch to taking a list of pins
...
.. adopting validate_pins from RGBMatrix into shared-bindings
.. updating other platforms for API change
2021-06-10 11:15:18 -05:00
5c835adb10
Correct pull-down direction in parameter documentation for rp2pio
2021-06-09 20:39:56 +00:00
c1c101ca2d
Merge pull request #4864 from ladyada/main
...
macropad rev B definion and fix for SH110x addressing
2021-06-07 21:59:56 -04:00
b6a268fca4
Further deinit additions
2021-06-07 14:13:59 -04:00
63c1791d87
Merge remote-tracking branch 'upstream/main' into rp2040-alarms
2021-06-07 14:11:41 -04:00
f2149edbd2
Add deinit to new boards
2021-06-07 12:48:12 -04:00
2ff9e9766f
handclang
2021-06-07 12:39:59 -04:00
c4f685aab1
Merge pull request #4865 from ZodiusInfuser/pimoroni_boards
...
Added definition for upcoming Pimoroni RP2040 board
2021-06-07 11:13:01 -04:00
3890271f19
turn off all neopix when booting
2021-06-06 18:30:17 -04:00
01195c2089
update to rev B
2021-06-06 15:57:41 -04:00
bc014cecb5
Merge pull request #4859 from DavePutz/hcsr04_fix
...
Fix pulsein pause and resume functions to handle HCSR04
2021-06-04 13:26:05 -07:00
57334c812e
Fix pulsein pause and resume functions to handle HCSR04
2021-06-04 12:10:41 -05:00
af7557b53b
Updated with final USB PID
2021-06-04 16:02:32 +01:00
a99eba35b8
Merge pull request #4809 from DavePutz/issue_4266
...
Fix for Issue #4266 - second PWMAudioOut interferes with the first one
2021-06-03 19:08:28 -05:00
6011db3aec
Added board definition
2021-06-03 15:49:23 +01:00
6af36757a7
lengthen RP2040 xosc startup time
2021-06-02 08:50:20 -04:00
8761e4bfd7
Initialize pacing timer
2021-05-30 12:12:38 -05:00
b06ec0a776
Added libraries dependency.
2021-05-30 09:57:00 +08:00
a2b220370e
Fix formatting issue
2021-05-29 12:26:41 -05:00
760e8c77bd
Changes to correct repeat playing on a channel
2021-05-29 11:55:10 -05:00
ebe4d90ac3
Updated the copyright information.
2021-05-29 10:12:22 +08:00
feff243e8f
Add RTC deep sleep alarm support
2021-05-28 13:52:05 -04:00
ebda9e07f4
Use 4 spaces instead of tab.
2021-05-29 01:04:13 +08:00
bfcb8c5896
Do not use neopixel as status LED. Also removed the unused definition.
2021-05-29 00:47:14 +08:00
5920ac647a
Modified the essential files for Maker Pi RP2040.
2021-05-28 22:42:54 +08:00
321e5dd16f
Use underscore instead of dash for board name.
2021-05-28 18:01:02 +08:00
24041f34b0
Merge remote-tracking branch 'upstream/main' into rp2040-alarms
2021-05-27 18:40:40 -04:00
8e1892ac6f
Implement RP2040 Alarm module
...
Adds light and deep sleep functionality for the TimeAlarm and PinAlarm
alarm categories. Adds board deinit for all platforms.
2021-05-27 18:33:29 -04:00
da7c74f614
Initial commit.
2021-05-27 18:02:52 +08:00
24e641a834
Fix for Issue #4266
2021-05-25 16:06:00 -05:00
038c9d6194
Merge pull request #4796 from Neradoc/nera-pwmrgb-status-pimoroni
...
Enable the PWM status LED on Pimoroni Tiny 2040 and PicoSystem
2021-05-24 13:30:55 -07:00
2e90d5ed07
clang a bit
2021-05-22 12:39:42 -04:00
d52f149e84
add ESP CS pin to make wifi demos easier
2021-05-22 12:22:28 -04:00
ac855afb48
Some pin neatening and updated PID to unused Adafruit one!
2021-05-22 11:57:46 -04:00
14dbec7c04
Merge branch 'main' of https://github.com/blitzcitydiy/circuitpython into main
2021-05-22 01:02:21 -04:00
9f4eb48e70
Updating MISO
...
While testing WIFI realized MISO was defined incorrectly
2021-05-22 01:02:06 -04:00
352281e23e
Adding Arduino Nano RP2040 Connect
...
Re-commiting to fix local GitHub config issues. Adding CircuitPython support for the Arduino Nano RP2040 Connect. Have tested all digital and analog I/O, I2C, onboard LSM6DSOX. Uses the AT25SF128A external flash.
2021-05-21 20:44:11 -04:00
6808d04d53
enable the PWM status LED on Pimonoroni Tiny 2040 and PicoSystem
2021-05-21 20:13:30 +02:00
5643355e90
Merge remote-tracking branch 'adafruit/main' into simplify_status_led
2021-05-20 08:35:15 -07:00
642fbcf87a
Handle status led power
...
This no longer turns on status LED power before running user code.
Therefore, use of the status LED on some boards will also have to
enable the power.
2021-05-19 10:57:14 -07:00
9dabe882f1
Fix safe mode on rp2040
2021-05-19 10:18:43 -07:00
b667736110
Merge branch 'adafruit:main' into main
2021-05-18 20:55:55 -04:00
d8b895f1d7
add LED and speaker - natch!
2021-05-18 20:53:13 -04:00
cec9015e19
iz makropad with oled
2021-05-18 11:09:03 -04:00
9393467819
Update comment for spelling
2021-05-17 22:13:00 -05:00
ff4b1b28d2
iFormatting fixes
2021-05-17 16:43:55 -05:00
11ef36d09d
Implement pulseout for RP2040
2021-05-17 16:24:45 -05:00
689ec86225
Merge pull request #4754 from dhalbert/fix-endpoint-checking
...
Fix endpoint checking; Clean up safe mode printing
2021-05-14 11:25:01 -07:00
fa6c06fb38
count in/out endpoints; allow more usb modules on low-endpoint boards
2021-05-13 21:59:02 -04:00
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
502b66eac0
moar trinkz
2021-05-11 22:03:05 -04:00
a3de9bda5f
Swap mis-labelled D0/D1 pins on SparkFun Pro Micro RP2040
2021-05-08 21:35:37 -04:00
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13
2021-05-06 11:17:53 -07:00
3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod
2021-05-05 17:51:52 -07:00
d2b558993e
merge from main, including MicroPython 1.12 merge
2021-05-03 20:56:04 -04:00
8b8968101d
Merge pull request #4691 from nm3210/sparkfunthingplusrp2040_boardupdate
...
Update Sparkfun Thing Plus RP2040 pins to match board breakouts
2021-05-03 09:27:19 -04:00
da19e8e2d7
Merge remote-tracking branch 'origin/main' into fix-codeformat-subdirs
2021-04-30 15:31:08 -05:00
929ee8d3b4
Fix pre-commit whitespace error
2021-04-30 14:16:13 -04:00
d93a9a1dbc
Merge pull request #4683 from DavePutz/issue_4661
...
Issue #4661 - Wrap pulsein values when maxlen is exceeded.
2021-04-30 11:07:54 -07:00
e95e921ca1
codeformat: Fix filename matching
...
In #4683 , tannewt noticed that uncrustify was not running on some
file in common-hal.
I investigated and found that it was not being run on a bunch of paths.
Rather than make incremental changes, I rewrote list_files to work
bsaed on regular expressions; these regular expressions are created from
the same git-style glob patterns.
I spot-checked some specific filenames after this change, and all looks good:
```
$ python3 tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup extmod/virtpin.c ports/raspberrypi/background.h ports/raspberrypi/common-hal/pulseio/PulseIn.c
black --fast --line-length=99 -v tests/thread/thread_exit1.py
```
recursiveloop and int_small are excluded, while PulseIn, virtpin,
and background are included.
Testing running from a subdirectory (not _specifically_ supported though):
```
(cd ports && python3 ../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c)
../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup ../extmod/virtpin.c raspberrypi/common-hal/pulseio/PulseIn.
```
As a side-effect, a bunch more files are re-formatted now. :-P
2021-04-30 10:48:08 -05:00
9c1466a330
Update Sparkfun Thing Plus RP2040 pins to match board
...
This fixes some missing and incorrectly-assigned pins for the SparkFun Thing Plus RP2040 protoboard so that they actually match what the board says. This also changes the default SPI pins from the SD card pins to the breakout pins on the side of the board.
2021-04-30 09:37:37 -04:00
4d97680cae
Fix board definition.
2021-04-29 13:45:39 -04:00
1ec59cd534
Fix up indentation
2021-04-29 12:38:13 -05:00
0bf747870a
Fixing board definition.
2021-04-29 12:41:23 -04:00
f06d54524d
merge from adafruit
2021-04-28 23:48:26 -04:00
cfac07c1cc
Wrap pulsein when maxlen is exceeded
2021-04-28 11:20:13 -05:00
17fcd499b2
Merge pull request #4649 from tannewt/merge_1.11_2
...
Merge MicroPython v1.11 into CircuitPython
2021-04-27 11:02:02 -07:00
f99deeda68
Merge pull request #4668 from DavePutz/issue_4659
...
Increased possible pulsein length to ~65 ms.
2021-04-27 11:01:51 -07:00
91739de71a
Increased max pulse to 65535 us
2021-04-26 18:52:15 -05:00
76033d5115
Merge MicroPython v1.11 into CircuitPython
2021-04-26 15:47:41 -07:00
5bd1da21a2
Increased possible pulsein length to 32 ms.
2021-04-25 21:38:57 -05:00
92919c25c2
Merge pull request #4666 from DavePutz/issue_4660
...
Reset buffer index in PulseIn clear
2021-04-25 20:33:58 -05:00
d1861a6b9c
Reset buffer index in PulseIn clear
2021-04-25 14:24:21 -05:00
f7f6a42f3d
Merge pull request #4663 from zapwizard/patch-1
...
Update pins.c
2021-04-25 15:09:13 -04:00
Scott Shawcroft
Kattni Rembor
Scott Shawcroft
ZodiusInfuser
Dan Halbert
Chris Wilson
Jeff Epler
Tod Kurt
Nathan Young
root
Dan Halbert
microDev
Daniel Griswold
Radomir Dopieralski
Lucian Copeland
Ben Clifford
Limor "Ladyada" Fried
Jeff Epler
Kong Wai Weng
BlitzCityDIY
Neradoc
nm3210
Jeff Epler