Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
Dan Halbert
57c33059f3
board_deinit() everywhere
2021-11-30 11:00:10 -05:00
Neradoc
8625e53817
change board dicts to include a common macro with __name__
2021-09-03 21:03:55 +02:00
Neradoc
4d05bb26bf
change board.ID to board.board_id
2021-08-26 23:11:55 +02:00
Neradoc
b14b294516
add board.ID
2021-08-26 23:11:55 +02:00
Scott Shawcroft
ca2cb9af2b
Remove MICROPY_PORT_* macros used for never reset
...
Now we use never_reset which is generally more correct and easier
to get right.
Fixes #5001 and fixes #4997
2021-07-15 16:20:04 -07:00
Dan Halbert
c37f021791
regularize and shrink many builds
2021-05-05 12:35:41 -04:00
microDev
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
gamblor21
49e059cdaf
Removing frozen libraries
2021-01-16 16:37:42 -06:00
Jeff Epler
83c6774a44
Revert "Removing frozen libs"
...
This reverts commit 23ed3ef971
2020-12-30 10:55:28 -06:00
Scott Shawcroft
40118bcf57
Add board_deinit for use with sleep
...
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes #3786
2020-12-08 10:52:25 -08:00
gamblor21
23ed3ef971
Removing frozen libs
2020-11-11 11:36:04 -06:00
Diego Elio Pettenò
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
Max Holliday
93760042fa
no current need for NVM
2020-02-16 11:43:19 -08:00
Max Holliday
b91c4e66cb
adding Adafruit_CircuitPython_Register to frozen + updating SAM32
2020-02-08 16:09:47 -08:00
Dan Halbert
1505da784f
wip
2019-10-28 18:15:02 -04:00
Dan Halbert
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
Dan Halbert
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
Dan Halbert
1bb4fccc3b
Turn off SUPEROPT on gc.c instead of trying to squueze inline limit so much; reorganize mpconfigboard.mk files
2019-06-12 11:08:22 -04:00
Scott Shawcroft
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
Dan Halbert
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
Dan Halbert
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
Max Holliday
2e48739a4e
standardizing on "BATTERY" pin; and load-leveling Travis
2019-02-06 10:50:57 -08:00
Max Holliday
4c1b85cdcd
elaborating on include path for board_busses
2019-02-05 20:21:54 -08:00
Max Holliday
30fcb14017
correcting VID/PID and adding sam32 to travis
2019-02-05 19:20:43 -08:00
Max Holliday
a2936c4c20
adding SAM32 board
...
SAMD51 running circuitpython talking to an ESP32 running micropython.
Full board details at: https://github.com/maholli/SAM32
2019-02-05 17:22:34 -08:00
