hathach
3525d65af3
should fix #1021
...
- update tinyusb for wanted char
- move usb code into usb.c
2018-07-17 21:24:49 +07:00
hathach
f98c7f708e
merge review
2018-07-12 01:37:23 +07:00
hathach
10846d316b
Merge branch 'master' into nrf52840_usbboot
2018-07-11 21:35:44 +07:00
hathach
a53b1c7cf1
code format
2018-07-10 22:49:51 +07:00
arturo182
2c63fb2a94
nrf: Remove the random hal and module
...
Thus getting rid of the whole old hal!
The module is not needed because the common-hal
nRF implementation uses HW RNG anyway.
2018-07-10 14:59:22 +02:00
hathach
0e819599e7
Merge branch 'master' into nrf52840_usbboot
2018-07-10 02:02:52 +07:00
hathach
7715d19efe
update bootloader hex
2018-07-10 01:20:37 +07:00
hathach
97a1ae911e
add family option for uf2
2018-07-10 01:18:14 +07:00
arturo182
25ece8fb3d
nrf: Rewrite the UART HAL using nrfx
2018-07-08 16:42:04 +02:00
arturo182
c6a2a55bc9
nrf: Cleanup mpconfigboard files
...
All the removed defines were used by legacy modules that are now
removed.
2018-07-08 15:18:11 +02:00
hathach
948ddf8463
make SD default to s140 and s132 for nrf52840 and nrf52832
...
add CFG_HWUART_FOR_SERIAL for using jlink as REPL
2018-07-06 14:39:49 +07:00
hathach
7fff7f5e70
add usb msc support for nrf52840
2018-07-04 16:40:53 +07:00
hathach
46c453cf0a
add tinyusb as submodule
2018-07-03 17:46:08 +07:00
hathach
c4f11dfd32
flash target update bootloader setting to skip crc checksum
2018-06-27 15:22:44 +07:00
hathach
8fbe1d73e9
clean up makefile
2018-06-27 15:13:20 +07:00
hathach
4920cc47ca
move dfu-gen dfu-flash dfu-bootloader bootloader uf2 target to common Makefile since several board use it
2018-06-27 14:31:08 +07:00
hathach
bed7310fd7
update bin files
2018-06-27 14:13:18 +07:00
hathach
ecd3993d43
update pin map for feather52840
2018-06-27 14:06:15 +07:00
hathach
8d065fe0e6
update reamde
2018-06-26 00:16:58 +07:00
hathach
54547683f9
add uf2, bootloader target
2018-06-25 23:31:14 +07:00
hathach
4722371be9
update bootloader hex with uf2
2018-06-25 23:27:00 +07:00
hathach
f5be5ed6ee
Merge branch 'master' into nrf52840_usbboot
2018-06-25 17:12:24 +07:00
arturo182
596a1d8843
nrf: Rename feather52 to feather52832 in readme files
2018-06-22 10:04:39 +02:00
arturo182
25e71a56d4
nrf: Update the PCA10056 example to use new pin naming
2018-06-20 23:39:36 +02:00
arturo182
c2d4d0a10b
nrf: Simplify pin generation and definition
...
This commit cleans up the pin generation code, all the pins and their
AF (only ADC, for now) are specified in nrf52_af.csv and board use their
own csv file to specify which pins are available on that board and if
they have any special names.
2018-06-20 23:26:32 +02:00
arturo182
ff918556cd
nrf: Simplify the board makefiles
...
With the only difference between a SD and non-SD build is the linker
file, there's no need to have two separate .mk per board files,
just use a conditional.
2018-06-20 21:21:45 +02:00
arturo182
5509f394dc
nrf: Add a nrfx submodule and prepare for using the new drivers
2018-06-20 20:43:59 +02:00
arturo182
b47a67d566
nrf: Remove machine, pyb and utime modules
...
Micropython legacy, keeping it consistent with atsam port.
2018-06-20 18:21:18 +02:00
hathach
61437106e7
update bootloader for feather nrf52840
2018-06-19 15:27:07 +07:00
hathach
6d2702ed98
Merge branch 'master' into nrf52840_usbboot
2018-06-19 14:50:17 +07:00
Scott Shawcroft
4e7eee3553
Merge pull request #946 from arturo182/nrf_sd6
...
nrf: Use the production version of s140 6.0.0
2018-06-18 16:29:41 -07:00
arturo182
feee808955
nrf: Use the production version of s140 6.0.0
2018-06-18 23:12:28 +02:00
Scott Shawcroft
05547b72ac
Switch to Feather52s full name to avoid confusion with the nrf52840 later.
...
Fixes #940
2018-06-18 10:51:04 -07:00
hathach
35d38dbfed
update nrf52840 bootloader hex
2018-06-13 17:27:55 +07:00
hathach
418e28c7dc
update nrf52840 bootloader hex and target
2018-06-08 16:10:49 +07:00
hathach
2b3436e87c
add feather nrf52 uart rts, cts support
2018-06-08 15:59:38 +07:00
hathach
c10899d13f
allow to flash feather52 and feather52840 with jlink
...
add crc bypass magic to bootloader settting
2018-06-08 15:11:17 +07:00
hathach
6d4a2f5524
Merge branch 'master' into usbboot
2018-05-17 15:23:45 +07:00
hathach
52ebfd07a5
update nrfutil to 0.5.2d with singlebank option
2018-05-17 15:20:07 +07:00
hathach
53593d1315
fix #809
...
define CIRCUITPY_BOOT_OUTPUT_FILE will cause mp_hal_stdout_tx_strn() to
invoke before serial_init() is called. Solution is skipped output to
serial if it is not inited.
2018-05-15 18:40:49 +07:00
hathach
05f36ebeb1
update the bootloader hex for feather52840
2018-05-15 16:06:03 +07:00
Kevin Townsend
d0e00d7fbe
Added built to example
2018-04-23 20:01:53 +02:00
Kevin Townsend
0de8697315
Added note on USB CDC bootloader
2018-04-23 19:58:29 +02:00
hathach
ce9f05f91b
add missing files
2018-04-24 00:51:44 +07:00
hathach
50e7a4caa8
add bootloader hex
2018-04-24 00:19:04 +07:00
ladyada
926849d7a8
don't use python nrfutil on windows, it doesnt work :/ tested feather52 makefile on windows/mingw
2018-04-13 14:00:20 -04:00
Kevin Townsend
fce0b0858f
Removed leftover build option
2018-02-15 21:46:14 +01:00
Kevin Townsend
10497d1db0
Update for style consistency
2018-02-15 21:44:05 +01:00
Kevin Townsend
6544f4cb5c
Cleanup minor typos
2018-02-15 21:42:24 +01:00
Kevin Townsend
da15053e0a
Fixed pin P0_00
2018-02-15 21:41:21 +01:00
