Commit Graph

23 Commits

Author SHA1 Message Date
Peter Hinch 927a5d1dfd docs/library/pyb: Add deprecation warning for mount and old block proto.
pyb.mount(None, mountpoint) functionality is also removed and replaced by
uos.umount.
2018-09-20 16:31:36 +10:00
Damien George 805fd0cfe6 docs/library: Remove "only" directive from all pyb module docs.
By virtue of its name, the pyb module would only be available on a pyboard
and so does not need to have conditional "only" directives throughout its
documentation.

These conditionals were added mostly in
cfcf47c064 in the initial development of the
cc3200 port, which had the pyb module before it switched to the machine
module.  And wipy only conditionals were removed from the pyb module
documentation in 4542643025, so there's no
need to retain any more conditionals.
2018-07-18 15:47:44 +10:00
Damien George e708e87139 docs/library/pyb.rst: Add note about availability of USB MSC-only mode. 2018-02-01 15:52:49 +11:00
Alexander Steffen c9a48eb464 docs,teensy: Use the name MicroPython consistently in documentation 2017-07-15 11:44:32 +02:00
Paul Sokolovsky fbd252b77c docs/{esp,pyb,ubinascii}: Use markup adhering to the latest docs conventions. 2017-06-27 00:38:05 +03:00
Damien George 27c149efe0 stmhal: Add pyb.fault_debug() function, to control hard-fault behaviour.
This new function controls what happens on a hard-fault:
- debugging disabled: board will do a reset
- debugging enabled: board will print registers and stack and flash LEDs

The default is disabled, ie to do a reset.  This is different to previous
behaviour which flashed the LEDs and waited indefinitely.
2017-02-06 13:22:17 +11:00
Philip Potter 0f8b1ba8a2 docs/library: Add reference for pyb.usb_mode and pyb.USB_HID. 2016-08-29 15:17:20 +10:00
Mike Causer ce166e6b68 docs: Spelling mistakes 2016-08-02 11:17:46 +03:00
Peter Hinch c13b2f2d00 docs: Several minor changes: network, pyb, ADCAll and inline asm. 2016-01-13 21:53:26 +00:00
danicampora 4542643025 docs: Update all WiPy docs to reflect the new API. 2015-10-17 23:29:04 +02:00
Damien George 845b5a2a58 docs: Describe properly how MCU can be woken from pyb.standby() state. 2015-10-10 00:03:14 +01:00
Daniel Campora ea2cc2b907 docs: Add more documentation for the CC3200 in the pyb module. 2015-06-16 15:45:24 +02:00
Daniel Campora cfcf47c064 docs: Add initial draft documentation for the WiPy.
This makes all common files "port-aware" using the .. only directive.
2015-06-10 23:37:56 +02:00
Damien George dea853d3a3 docs: Document pyb.stop, pyb.standby and pyb.RTC.wakeup. 2015-04-21 22:35:17 +01:00
Damien George e97dddcdca docs: Document pyb.main function to set main script. 2015-04-09 10:08:25 +01:00
Damien George d39c7aa517 stmhal: Add Python-configurable USB HID mode.
Different HID modes can be configured in Python.  You can either use
predefined mouse or keyboard, or write your own report descriptor.
2015-02-13 14:02:51 +00:00
Damien George 3990dcfcd7 docs: Add note about maximum frequency of busses. 2015-01-08 22:54:26 +00:00
Damien George ddbcc79550 docs: Add quickref info about Servo; improve Servo docs. 2015-01-01 18:00:45 +00:00
Damien George 7690b13953 stmhal: Add ability to mount custom block device. 2014-12-27 20:20:51 +00:00
Damien George 008251180d stmhal: Enhance pyb.freq to configure bus (AHB, APB1, APB2) freqs.
This is useful if you need precise control over the speed of
peripherals (eg SPI clock).
2014-12-08 21:32:55 +00:00
Damien George 38bd762121 stmhal: Improve pyb.freq to allow 8 and 16MHz (not usable with USB).
Also restrict higher frequencies to have a VCO_OUT frequency below
432MHz, as specified in the datasheet.

Docs improved to list allowed frequencies, and explain about USB
stability.
2014-11-02 15:10:15 +00:00
Damien George a58713a899 docs: Cleanup and update some docs. 2014-10-31 22:21:37 +00:00
Damien George 88d3054ac0 docs: Import documentation from source-code inline comments.
The inline docs (prefixed with /// in .c files) have been converted to
RST format and put in the docs subdirectory.
2014-10-31 01:37:19 +00:00