djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
32,327 Commits 21 Branches 274 Tags 785 MiB
af91625fb5
Commit Graph

566 Commits

Author SHA1 Message Date
Damien George
f3e4ed82a1 github/workflows: Switch from lcov to gcov. 
Coverage calculated by Codecov has the same reliability/deterministic
issues as Coveralls did, so the problem is likely to do with the output of
lcov/gcov, rather than the analysis and display of the data.

Switch from lcov to gcov for data generation to try and simplify this
process of computing coverage.

Signed-off-by: Damien George <damien@micropython.org>
 2021-06-26 21:34:37 +10:00
Damien George
c940597314 github/workflows: Switch from Coveralls to Codecov. 
As discussed in #7455, Coveralls doesn't work properly anymore, it has
many spurious errors with reduced coverage.

Signed-off-by: Damien George <damien@micropython.org>
 2021-06-25 16:17:54 +10:00
Damien George
2dc4f843bc github/workflows: Add workflow to build and test javascript port. 
Signed-off-by: Damien George <damien@micropython.org>
 2021-06-25 11:31:00 +10:00
Scott Shawcroft
dc76306cfa
Enable a BLE workflow 
nRF CircuitPython boards will now provide the file transfer
service defined here: https://github.com/adafruit/Adafruit_CircuitPython_BLE_File_Transfer

USB capable boards will only advertise if previously bonded to a
device or if the reset button is pressed during the fast blue
flashes on start up. When pressed, the board will restart again but
the blue period will not flash.

Boards without USB will always advertise.

When previously bonded, the advertisement is private so that no
other peers can connect. If advertising publicly, the tx power is
lowered to reduce the likelihood of bonding from a distance.

This PR also fixes issues with loading identities of bonded peers
so that our address can now be resolved and we can resolve others'
addresses when scanning.
 2021-06-24 12:59:14 -07:00
Jeff Epler
6a48c69419 tighten conditions under which pypi upload is attempted 2021-06-24 11:08:34 -05:00
Jeff Epler
a8e599a3de upload the 'sdist' file as an artifact / to s3, not the whole circuitpython-stubs folder 2021-06-22 15:01:19 -05:00
Jeff Epler
f51ca53553 refine stubs-building procedure 
* so that excess files are not included in sdist, perform build down
   in circuitpython-stubs
 * This means we need to
   * Remove the need-pypi check
   * Copy a setup.py, README, and MANIFEST.in into the stubs build location
   * Revamp how the overall `mypy --strict` check lists its inputs
 * Add a new test that actually installing the stubs lets us do type
   checking (tools/test-stubs.sh)
 * Add a missing return type to a __init__ function (why was this not
   an error under `mypy --strict`, I wonder)
 2021-06-22 08:59:05 -05:00
foamyguy
c81f3fd789 Merge branch 'adafruit_main' into upload_stubs_action 
# Conflicts:
#	setup.py
 2021-06-19 12:36:13 -05:00
foamyguy
1fe38138e8 use scm_version for stubs. seperate stubs upload from S3 mpy-cross upload steps in actions. 2021-06-19 12:33:34 -05:00
Jeff Epler
124c7b785a Add kaluga version 1.3 
.. this board is nearly the same as the "1.2" version originally
released, but makes a few changes to reduce pin conflicts between the 13-pin
camera header and the bootstrapping pins.  "1.3" was introduced in summer
2020-- check the bottom of your board silk to find out whether you have a 1.2
or a 1.3, because it's not clear whether there is remaining 1.2 stock.

Another vexing fact about the 1.3 is that its LCD can have one of two
chipets, and the chipset used is not marked anywhere!
 2021-06-08 13:28:48 -05:00
Limor "Ladyada" Fried
c4f685aab1
Merge pull request #4865 from ZodiusInfuser/pimoroni_boards 
Added definition for upcoming Pimoroni RP2040 board
 2021-06-07 11:13:01 -04:00
foamyguy
abfeb69454 remove hashes from version. upload to pypi in same step as S3 2021-06-06 10:14:02 -05:00
foamyguy
5a22a0f601 upload stubs step in actions 2021-06-05 12:07:12 -05:00
Damien George
b15e1ef5a6 github/workflows: Add workflow to build and run unix port on ARM. 
Following on from ef16834887, this adds a
coverage build and running of the test suite on an ARM 32-bit Linux-based
architecture.

Signed-off-by: Damien George <damien@micropython.org>
 2021-06-05 11:03:09 +10:00
ZodiusInfuser
6011db3aec Added board definition 2021-06-03 15:49:23 +01:00
George White
db1830d62b Add Sparkfun MicroMod SAMD51 2021-06-02 21:53:23 -04:00
Scott Shawcroft
892dfa84ed
Merge pull request #4826 from jepler/actions-windows-build 
Check that select firmwares build on Windows with MSYS2
 2021-06-01 13:04:06 -07:00
Scott Shawcroft
dea5c82d51
Merge pull request #4834 from reppad/muselab_nanoesp32_s2_wrover 
Muselab nanoESP32-S2 w/WROVER
 2021-06-01 12:46:47 -07:00
Dan Halbert
aade07492f
Merge pull request #4832 from jepler/mpy-cross-macos-arm64-universal 
mpy-cross: Build an arm64 (M1) bin and a universal bin
 2021-05-31 09:05:52 -04:00
Jeff Epler
ed977e9f25 mpy-cross: Build an arm64 (M1) bin and a universal bin 2021-05-30 13:03:12 -05:00
reppad
625fa881c6 Add Muselab Nanoesp32_s2 w/Wrover 2021-05-30 16:14:21 +02:00
Jeff Epler
49db85cb3d Check that select firmwares build on Windows with MSYS2 
This configuration is used by @ladyada and more often than it should
we've discovered late that a change introduced problems building
there.

By adding this to regular CI, hopefully we learn about and fix these
issues sooner rather than later.
 2021-05-28 16:47:29 -05:00
Kong Wai Weng
5920ac647a Modified the essential files for Maker Pi RP2040. 2021-05-28 22:42:54 +08:00
Dan Halbert
5eb4cc6489 Remove non-product Adafruit boards 2021-05-26 16:01:17 -04:00
Damien George
ef16834887 github/workflows: Add workflow to build and run unix port on MIPS. 
This adds a coverage build and running of the test suite on a MIPS 32-bit
big endian architecture.  It uses the feature of qemu to execute foreign
code as though it were native to the system (using qemu user mode).  The
code compiled for MIPS will run under the qemu VM, but all syscalls made by
this code go to the host (Linux) system.

See related #7268 and #7273.

Signed-off-by: Damien George <damien@micropython.org>
 2021-05-26 16:33:18 +10:00
Philipp Ebensberger
5f68f0d08a github/workflows: Add CI workflow for mimxrt port. 2021-05-26 00:12:45 +10:00
BlitzCityDIY
9f4eb48e70 Updating MISO 
While testing WIFI realized MISO was defined incorrectly
 2021-05-22 01:02:06 -04:00
ladyada
38ffc4352d add workflow for makropad 2021-05-18 11:09:03 -04:00
Jeff Epler
47947dc23c
Merge pull request #4749 from tannewt/merge_1.15 
Merge in MicroPython 1.15
 2021-05-12 20:52:11 -05:00
Scott Shawcroft
966d25c6a5
Merge MicroPython v1.15 into CircuitPython 2021-05-12 17:51:42 -07:00
lady ada
502b66eac0 moar trinkz 2021-05-11 22:03:05 -04:00
Jeff Epler
446169e078
Merge pull request #4720 from tannewt/merge_1.13 
Merge in MicroPython 1.13
 2021-05-08 08:46:03 -05:00
Dan Halbert
c6b9885573
Merge pull request #4721 from dhalbert/update-xtensa-cache-id 
update github actions xtensa cache id; fix a typo
 2021-05-06 16:48:20 -04:00
Dan Halbert
0773e355a7 update github actions xtensa cache id; fix a typo 2021-05-06 15:10:45 -04:00
Scott Shawcroft
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13 2021-05-06 11:17:53 -07:00
Dan Halbert
ebf9dcb47a
Merge pull request #4689 from dhalbert/dynamic-usb-descriptors 
Dynamic USB descriptors
 2021-05-06 13:51:38 -04:00
Scott Shawcroft
d8701e5136
Update binary path 2021-05-05 15:48:01 -07:00
Jeff Epler
b9f349779e Build an aarch64 version of mpy-cross 2021-05-05 14:43:53 -05:00
Dan Halbert
c37f021791 regularize and shrink many builds 2021-05-05 12:35:41 -04:00
Scott Shawcroft
f0bb26d70f
Merge MicroPython 1.13 into CircuitPython 2021-05-04 18:06:33 -07:00
Mark
5679eb4fd7
Merge pull request #4677 from skerr92/add-cp-sapling-rev-b 
Add cp sapling rev b
 2021-04-29 19:22:49 -05:00
Seth Kerr
710397fd84 adding board to build.yml 2021-04-27 16:54:13 -06:00
Dan Halbert
454e78f41f merge #4645 from 6.2.x to main 2021-04-23 13:33:58 -04:00
Dan Halbert
c931c84e49 new cache id to fix failing xtensa builds 2021-04-22 10:45:25 -04:00
Limor "Ladyada" Fried
83c768b25d
Merge pull request #4627 from aramcon-badge/aramcon2-badge 
Add board definition files for ARAMCON2 Badge
 2021-04-19 15:17:47 -04:00
Benny Meisels
f0b04d403d Add board definition files for ARAMCON2 Badge 2021-04-19 20:41:01 +03:00
Eddie Espinal
626f786e6b Add the atmegazero_esp32s2 to the build.yml file. 2021-04-19 09:07:32 -04:00
Limor "Ladyada" Fried
b6fa90d0b5
Merge pull request #4625 from stonehippo/sparkfun_micromod_atp_rp2040 
Added Sparkfun MicroMod RP2040
 2021-04-18 21:14:47 -04:00
George White
e0bb7385a1
Added Sparkfun MicroMod RP2040 
Added board definition for the Sparkfun MicroMod RP2040.

Mostly followed the format for pins from the MicroMod nRF52840 board
definition, as MicroMod tries to standardize pins across
microcontrollers.
 2021-04-17 10:56:04 -04:00
Dan Halbert
0189b80aa4
Merge pull request #4605 from tannewt/build_fail_matcher 
Add build file matcher to pull out which board/language builds fail
 2021-04-16 16:46:49 -04:00
Dan Halbert
f55d684057
Merge pull request #4612 from ZodiusInfuser/main 
Added definitions for Pimoroni RP2040-based boards
 2021-04-15 19:20:24 -04:00
Scott Shawcroft
0be5cbb5b6
Bump ESP-IDF cache key 
Builds are failing with current cache
 2021-04-15 10:21:26 -07:00
ZodiusInfuser
51570eb58b Sorted board list 2021-04-15 12:06:58 +01:00
Damien George
a9bbf7083e tools/ci.sh: Build esp32 using IDF v4.0.2 and v4.3. 
To test different IDF's, and also test building the GENERIC_S2 board.

Signed-off-by: Damien George <damien@micropython.org>
 2021-04-15 10:31:06 +10:00
ZodiusInfuser
e4456bd756 Added definitions for PicoLipo boards 2021-04-14 23:09:10 +01:00
Scott Shawcroft
8bef15aa2d
Match build failures to better highlight them 2021-04-14 11:52:00 -07:00
lady ada
42abb982fe rename proxsense to proxlight 2021-04-11 18:39:14 -04:00
lady ada
ff07b8f2d1 typo 2021-04-11 17:49:57 -04:00
lady ada
9dc6d691b8 add prox trinkey and rename others to adafruit_ 2021-04-11 17:45:37 -04:00
lady ada
56be8306cd try adding a submodule? 2021-04-10 23:22:13 -04:00
Scott Shawcroft
ebfe36c9aa
Merge pull request #4576 from felixerdy/main 
Add senseBox MCU
 2021-04-09 10:27:37 -07:00
Brian Dean
8544249fc0 boards/bdmicro_vina_d51: Replace old rev with new rev and rename. 
This update to the PR retains the earlier board rev (with a rename) so
that backward binary compatibility is not lost for the earlier board
revision. The primary name 'vina-d51' is retained for the latest
revision to make it easy for customers to select the proper UF2
download - because the name matches the commercial name.

Details:

Replace bdmicro_vina_d51 with bdmicro_vina_d51_pcb7 (revision 7 of
PCB) with boardfiles unmodified. Add _pcb7 to the workflow build.

Replace bdmicro_vina_d51 boardfile content with latest PCB updates
(revision 10 ov PCB). Add minimal comments in the board files to make
it clear which PCB revision is implemented. Update the USB PID to
reflect an updated board revision.
 2021-04-07 09:11:30 -04:00
Dan Halbert
ae80378c4e
Merge pull request #4545 from ElectronicCats/huntercat_nfc 
HunterCat NFC
 2021-04-04 14:21:49 -04:00
Jeff Epler
27d8832868
Merge pull request #4512 from m-byte/main 
Add Artisense RD00 board files
 2021-04-03 18:40:59 -05:00
Matthias Breithaupt
43ba81ffa1 Add Artisense RD00 board files 2021-04-03 17:20:59 +02:00
sabas1080
d4a45d401d add hunter cat nfc buld.yml 2021-04-02 18:38:37 -06:00
microDev
1ae6f362e1 clone repo before installing deps 
closes #4524
 2021-04-01 10:53:06 -04:00
microDev
77889fe70c
clone repo before installing deps 
closes #4524
 2021-04-01 18:00:56 +05:30
Jeff Epler
1bb5bed80f Remove sentence about a link that fixes a problem 
Multiple times it has occurred that people left this line in a PR by mistake.  it makes it look like they failed to include some useful information, but really is just a misunderstanding.  Delete the text to reduce the chance of misunderstanding.
 2021-03-29 21:31:00 -05:00
Scott Shawcroft
67c039db43
Checkout before installing deps 2021-03-22 16:15:55 -07:00
Scott Shawcroft
7867632a81
Merge remote-tracking branch 'adafruit/main' into rp2040_flash 2021-03-22 15:29:43 -07:00
lady ada
10c9f61352 fix sort 2021-03-21 19:11:15 -04:00
lady ada
36ae69ab6f qtpy is more of a button than a switch! add itsybitsy rev C files 2021-03-21 18:44:32 -04:00
Limor "Ladyada" Fried
4b42932188
Merge pull request #4449 from ladyada/main 
adventure together with rotary trinkey
 2021-03-20 13:37:31 -04:00
lady ada
8884682cac adventure together with rotary trinkey 2021-03-20 12:03:51 -04:00
Scott Shawcroft
4aea7f8f52
Add requirements-dev.txt for python deps 2021-03-19 15:22:23 -07:00
Dan Halbert
b2d913412f merge from upstream 2021-03-18 23:14:43 -04:00
Scott Shawcroft
11e510a06a
Merge pull request #4419 from spe2/main 
Add board definition for Sparkfun Pro Micro RP2040
 2021-03-17 18:17:24 -07:00
Jeff Epler
719e8710f2
Merge pull request #4411 from mintakka/thingplus-rp2040 
added board configuration for Sparkfun ThingPlus RP2040
 2021-03-17 16:23:55 -05:00
mintakka
cae3397ea0
Update .github/workflows/build.yml 
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
 2021-03-16 13:47:10 -04:00
spe2
ea578a10a6
Update build.yml 
Add Pro Micro RP2040 to build.yml.
 2021-03-15 21:19:51 -06:00
mintakka
49baa94446 added sparkfun_thingplus_rp2040 to .github/workflows/boards.yml and renamed board folder to include chip 2021-03-15 23:00:24 -04:00
microDev
090b6ba42f
update pre-commit 
- add formatting check
- add translations check
 2021-03-15 19:26:29 +05:30
felixerdy
de93df6444 add senseBox MCU 2021-03-12 17:57:55 +01:00
Damien George
6129b8e401 tests: Rename run-tests to run-tests.py for consistency. 
Signed-off-by: Damien George <damien@micropython.org>
 2021-03-12 19:56:09 +11:00
Scott Shawcroft
f0965b1ef7
Merge pull request #4350 from nitz/board-add-sparkfun-micromod-nrf52840 
Add new nRF port for SF MicroMod nRF52840.
 2021-03-10 18:13:11 -08:00
FBSeletronica
1aad93baa3 Fixing build.yml 2021-03-09 13:58:02 -03:00
Dan Halbert
7029783985 funhouse board 2021-03-08 21:24:28 -05:00
Fábio Souza
8dc6c5bf24
Merge branch 'main' into franzininhoWIFI_wrover 2021-03-08 20:58:22 -03:00
FBSeletronica
5d2631281a Adding franzininho_wifi_wroom in build.yml 2021-03-08 09:46:28 -03:00
FBSeletronica
6052b4e06b Fix build.yml 2021-03-08 09:31:10 -03:00
FBSeletronica
9b0b59d75f updating build.yml with franzininho wifi wroom 2021-03-08 09:01:36 -03:00
nitz
8e8368d594
Add sparkfun_nrf52840_micromod to build.yml 2021-03-07 01:25:31 -05:00
FBSeletronica
e68ab5ae2a Fix build.yml wifi Franzininho WIFI wrover Board 2021-03-06 18:33:24 -03:00
FBSeletronica
67e598a863 Fix build.yml wifi Franzininho WIFI wroom Board 2021-03-06 18:26:13 -03:00
FBSeletronica
48e727f7d6 adding port for Franzininho WIFI board ESP32S2 w/Wrover 2021-03-06 17:47:27 -03:00
FBSeletronica
6cf9c5158c adding port for Franzininho WIFI board 2021-03-06 17:15:54 -03:00
Jeff Epler
f7e42bfebc build.yml: Fix 'Print failure info' to not error 
Print Failure Info is for printing differences detected by 'Test all'.  When some other step fails, then "*.exp" doesn't match any files at all, and _this_ step fails too.

We will assume that Github Actions always runs with bash as the shell (as it does today). In this case, we can set the  "nullglob" shell option, so that a non-existent glob expands to nothing, instead of to itself.
 2021-03-05 12:50:15 -06:00
Dan Halbert
b1268107af change esp build cache key (again) 2021-03-04 15:22:56 -05:00
Scott Shawcroft
7970c882a6
Merge pull request #4316 from microDev1/issue-template 
Add issue templates
 2021-03-04 10:16:09 -08:00
microDev
9aa11ec51e
Apply suggestions from code review 2021-03-04 02:38:46 +05:30
Dan Halbert
d6836047a8 force a new idf-cache id to fix build issues 2021-03-03 14:04:56 -05:00
microDev
eafcd7d364
add issue templates 2021-03-03 11:22:33 +05:30
Scott Shawcroft
e41137c745
Merge pull request #4244 from UnexpectedCircuitPython/main 
Added Unexpected Maker TinyS2 board definition
 2021-02-23 10:40:06 -08:00
Seon Rozenblum
78b2daa2a7 Added Unexpected Maker TinyS2 board definition 2021-02-23 17:55:17 +11:00
ZodiusInfuser
312bbdaa6c
Added board names to build.yml 2021-02-19 18:27:23 +00:00
Damien George
aa3d6b6aa5 tools/ci.sh: Change esp32 CI to work with idf.py and IDF v4.0.2. 
Signed-off-by: Damien George <damien@micropython.org>
 2021-02-15 16:40:11 +11:00
Dan Halbert
08f30fedf5
Merge pull request #4188 from ladyada/main 
QT Py with RP2040
 2021-02-11 22:19:56 -05:00
lady ada
6428b9e728 sort 2021-02-11 19:31:10 -05:00
lady ada
6c914b8722 QT Py with RP2040 2021-02-11 19:21:42 -05:00
Scott Shawcroft
f6603aa566
Merge pull request #4168 from BHDynamics/main 
Add DynaLoRa-USB Dongle
 2021-02-10 11:03:16 -08:00
Enrique Casado
795ec21f6c Fix alphabetic order or build.yml 2021-02-10 12:55:08 +01:00
Enrique Casado
4c8ba3519b Edit build.yml 2021-02-10 12:45:14 +01:00
Scott Shawcroft
0c0b517112
Merge pull request #4105 from xorbit/main 
Add board Silicognition LLC M4-Shim
 2021-01-31 20:02:36 -08:00
iTitou
b8f5f5cd85 github/workflows/ports_unix.yml: Add job for a reproducible build. 
With a check for reproducible build date.  Invocation of the test suite is
not needed because it's already run in another job.

Signed-off-by: iTitou <moiandme@gmail.com>
 2021-02-01 11:20:18 +11:00
Aditya
6dba7a146d Add support for Lilygo TTGO T8 ESP32-S2 2021-01-31 14:30:31 +01:00
Patrick Van Oosterwijck
414db718e4 Add board to github workflow 2021-01-30 19:17:20 -07:00
stijn
37c2f507a0 github/workflows: Add workflow to verify commit message format. 
Using the new tools/verifygitlog.py script.
 2021-01-30 14:09:21 +11:00
Jeff Epler
66e0f2dcff workflows: use actions/cache@v2 2021-01-29 11:36:27 -06:00
Damien George
b8f4c623f9 github/workflows: Add CI workflow for rp2 port. 
Signed-off-by: Damien George <damien@micropython.org>
 2021-01-30 00:42:29 +11:00
Jeff Epler
65a883a74c bump esp-idf cache tag 
.. we are seeing failures that we have previously diagnosed as a bad
cache.  The github ui provides no way to update or delete a cache, so
this is our workaround.
 2021-01-28 13:52:30 -06:00
Damien George
0a079155e4 github/workflows: Fix code-size CI workflow. 
Changes are:
- Use ubuntu-20.04 so that gcc-multilib installs without error.
- Use "fetch-depth: 100" to get history prior to pull request.

Signed-off-by: Damien George <damien@micropython.org>
 2021-01-24 14:56:40 +11:00
Dan Halbert
f72c1474c5
Merge branch 'main' into connect 2021-01-22 03:56:57 -05:00
Dan Halbert
d74097c8a7 update github actions cache key for xtensa build 2021-01-22 03:54:51 -05:00
Dan Halbert
dbd5b7d9f0
Change xtensa cache key 
again, we need to stop using a bad cache for ESP32-S2 builds
 2021-01-21 07:29:54 -05:00
Scott Shawcroft
733094aead
Add initial RP2040 support 
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.

Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
 2021-01-20 19:16:56 -08:00
djix123
35c836f096
Update .github/workflows/build.yml 
Change name from _haxpress to _with_flash

Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2021-01-19 11:32:41 -05:00
Jonathan Giles
368751b6e9 Add support for a 'haxpress' external SPI flash build for the stm32f411ce blackpill board 2021-01-19 07:48:52 -05:00
Dan Halbert
c4f0325ff8
Merge pull request #3991 from TG-Techie/main 
Revision to TG-Watch
 2021-01-14 18:43:52 -05:00
Dan Halbert
54cc9ab4b9 change extensa github actions cache key to avoid bad cache 2021-01-14 11:29:21 -05:00
Jonah Yolles-Murphy
8f8af90098 final name and extra board 2021-01-13 23:51:34 -05:00
lady ada
748d44892d fix some precommit complaints 2021-01-12 12:55:02 -05:00
Scott Shawcroft
bfdaa6eb9c
Merge pull request #3959 from ladyada/main 
try adding new feather def
 2021-01-12 08:26:29 -08:00
Jonah Yolles-Murphy
8652d69614 update TG-Watch pins, name, and frozen libraries 2021-01-10 04:04:50 -05:00
lady ada
b5b0d45b73 add tft 2021-01-09 22:36:54 -05:00
Limor "Ladyada" Fried
9253351fa4
Merge branch 'main' into main 2021-01-09 12:25:16 -05:00
lady ada
999ee68e12 try adding new feather def 2021-01-09 12:22:53 -05:00
Jeff Epler
288c54c70a need to find strings in ulab 2021-01-08 18:54:08 -06:00
Jeff Epler
96dd3d3fef ensure gettext program is available to pre-commit 2021-01-08 18:21:27 -06:00
microDev
f7cafbf5f9
re-arrange ci actions 2020-12-26 12:54:36 +05:30
Scott Shawcroft
fb0c74c5f1
Merge pull request #3662 from ElectronicCats/bastble 
Add new board BastBLE
 2020-12-21 17:39:08 -08:00
Dan Halbert
f202eb734a
Merge pull request #3842 from StackRduino/main 
add stackrduino_m0_pro
 2020-12-18 12:33:34 -05:00
Dan Halbert
8f9cd7075e
Merge pull request #3752 from jepler/gcc10 
build: Update to gcc10
 2020-12-17 11:03:40 -05:00
Hany Elkomy
c6de41b4ea
Update build.yml 
added stackrduino_m0_pro board
 2020-12-17 17:14:49 +08:00
Dan Halbert
845cf03a45
typo 2020-12-14 15:55:31 -05:00
Dan Halbert
d2cb58a2df
suod apt-get update 2020-12-14 15:54:38 -05:00
Dan Halbert
eea8bc4999
Use Dec 11 gcc 10.2 release 2020-12-14 15:41:17 -05:00
Damien George
69262a11dc tools/ci.sh: Put echo of CI path in a separate function. 
Because the setup functions may print other information which should not be
added to the path.

Signed-off-by: Damien George <damien@micropython.org>
 2020-12-14 13:05:43 +11:00
Dan Halbert
37c9f768b5 add apt-get update 2020-12-11 16:03:28 -05:00
Damien George
f7225d1c95 github/workflows: Run unix and qemu-arm workflows when tests change. 
Signed-off-by: Damien George <damien@micropython.org>
 2020-11-30 10:48:41 +11:00
Damien George
a598ae5b4d github/workflows: Add workflows for all CI tasks, builds and tests. 
Signed-off-by: Damien George <damien@micropython.org>
 2020-11-29 22:21:28 +11:00
Scott Shawcroft
8364734ba3
Merge pull request #3749 from skerr92/add-cpsapling-spiflash 
Add cpsapling spiflash
 2020-11-24 15:22:21 -08:00
Jeff Epler
1553a647ca build: Update to gcc10 preview 2020-11-24 13:09:37 -06:00
jgillick
570353b946 Merge remote-tracking branch 'circuitpython/main' into thunderpack1.2 2020-11-23 22:40:47 -08:00
Seth Kerr
0e628caa6f forgot the build.yml files 2020-11-23 19:23:22 -05:00
jgillick
56634eb00e Rename thunderpack to v11 2020-11-22 01:31:41 -08:00
Seth Kerr
8301dcada0 I need to revisit the alphabet... 2020-11-20 16:26:33 -05:00
Seth Kerr
0fb075ab7e changed tab to spaces in build.yml, passes local pre-commit 2020-11-20 16:15:50 -05:00
Seth Kerr
b34e36d1db fixing build.yml 2020-11-20 15:44:53 -05:00
Jeff Epler
a0d305042c fix ubuntu-latest stragglers 2020-11-17 09:02:30 -06:00
Jeff Epler
7750b4d671 actions: Disable pagination of 'aws' commands 
An anticipatory workaround for
https://docs.aws.amazon.com/cli/latest/userguide/cliv2-migration.html#cliv2-migration-output-pager
 2020-11-17 09:02:30 -06:00
Jeff Epler
9c4b6c34b8 see what happens if workflows move to ubuntu 20.04 2020-11-16 16:03:29 -06:00
Ricardo
7253b2eb31 fix name board 2020-11-13 09:22:42 -06:00
Scott Shawcroft
d1f15d314b
Rename to include display details 2020-11-09 15:03:22 -08:00
Ricardo
ee57bc4d83 fix name 2020-11-09 14:25:42 -06:00
Ricardo
78dffd8ef8 add board on build.yml 2020-11-09 14:17:25 -06:00
Scott Shawcroft
9ef23e8659
Fix build board list 2020-11-06 15:29:58 -08:00
Scott Shawcroft
9bf77905e3
Merge pull request #3622 from sw23/main 
Fixing remaining stub mypy issues + run check-stubs to CI
 2020-11-02 18:16:32 -08:00
Jeff Epler
3845db4bb9
Update build.yml 
Need to request zip to recurse, because it is not the default
 2020-10-31 20:13:51 -05:00
Dan Halbert
073dc8751c
Use correct stubs directory name 
The stubs directory is called `circuitpython-stubs`, not `stubs`.
 2020-10-31 14:50:13 -04:00
Dan Halbert
0c30a26c9b
Update .github/workflows/build.yml 2020-10-31 13:19:13 -04:00
Jeff Epler
80ad300cad workflows: Fix typo that broke builds while trying to upload stubs 2020-10-31 11:58:28 -05:00
sw23
8e72b68e3d Adding mypy to dep list and clarifying Stubs stage name 2020-10-30 19:16:26 -04:00
sw23
6a63d20a5d Fixing remaining stub mypy issues + run check-stubs to CI 2020-10-30 18:56:40 -04:00
Scott Shawcroft
09ae9aefa8
Merge pull request #3610 from Edrig/main 
Add new board to nrf port: holyiot_nrf52840
 2020-10-30 12:03:34 -07:00
Scott Shawcroft
f47ec650ca
Merge pull request #3601 from jepler/upload-stubs-s3 
workflows: Upload stubs to s3
 2020-10-30 11:53:44 -07:00
Jeff Epler
e83be19d0f actions: Fix location of stubs upload 2020-10-28 17:48:12 -05:00
Noel Gaetan
34ce8d8642
Update build.yml 2020-10-28 22:43:54 +01:00
Gaetan
3dcee5be80 Fix: .github/workflows/build.yml 2020-10-28 22:38:13 +01:00
Gaetan
5ab2f16f64 Change Board Name to ADM_B_NRF52840_1 
edit   :         .github/workflows/build.yml
rename :         ports/nrf/boards/holyiot_nrf52840/board.c -> ports/nrf/boards/ADM_B_NRF52840_1/board.c
rename :         ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.h
rename :         ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.mk
rename :         ports/nrf/boards/holyiot_nrf52840/pins.c -> ports/nrf/boards/ADM_B_NRF52840_1/pins.c
 2020-10-28 22:08:10 +01:00
Scott Shawcroft
d86c6a74a4
Add to CI build 2020-10-26 17:06:04 -07:00
Gaetan
5deb045a81 Ready to PR 
* ../../.github/workflows/build.yml
	+ boards/holyiot_nrf52840/board.c
	+ boards/holyiot_nrf52840/mpconfigboard.h
	+ boards/holyiot_nrf52840/mpconfigboard.mk
	+ boards/holyiot_nrf52840/pins.c
 2020-10-26 23:32:57 +01:00
Jeff Epler
b4eb27557d workflows: Upload stubs to s3 2020-10-24 07:28:27 -05:00
Jeff Epler
fa4c4c2c10
Merge pull request #3587 from adafruit/6.0.x 
Merge in two fixes from 6.0.x
 2020-10-21 20:12:20 -05:00
Scott Shawcroft
50e90088a2
Merge pull request #3586 from Targett363/esp32s2_module_clip 
Esp32s2 module clip
 2020-10-21 12:58:23 -07:00
Jeff Epler
599bacb0b4 build.yml: Fix building mpy-cross-mac 
Recently, the macos-10.15 image was updated with a non-brew version of awscli.  This made our CI script, which does a `brew install awscli` fail:
```
Error: The `brew link` step did not complete successfully
The formula built, but is not symlinked into /usr/local
Could not symlink bin/aws
Target /usr/local/bin/aws
already exists. You may want to remove it:
  rm '/usr/local/bin/aws'
```
 2020-10-20 13:25:17 -05:00
Enrique Casado
97fae54659 Add DynOSSAT-EDU boards 2020-10-15 12:39:14 +02:00
Brian Dean
af2a23bd18 workflows/build.yml - Add forgotten vina_d51 board. 2020-10-13 17:08:30 -04:00
Targett363
2aee2b7dc7 Corecting spelling mistake in build.yml 2020-10-10 22:33:52 +01:00
Targett363
cd935346ec Updating the build.yml to include both Module Clip boards 2020-10-10 22:11:44 +01:00
Scott Shawcroft
699f19f44a
Merge pull request #3522 from tannewt/imx_metro 
Unify iMX RT flash config and add Metro M7 1011
 2020-10-09 13:48:58 -07:00
Jeff Epler
3149f5bfd8 workflows: Replace deprecated ::set-env 2020-10-08 16:20:23 -05:00
Scott Shawcroft
09bc415751
Unify iMX flash config and add Metro M7 1011 
This unifies the flash config to the settings used by the Boot ROM.
This makes the config unique per board which allows for changing
quad enable and status bit differences per flash device. It also
allows for timing differences due to the board layout.

This change also tweaks linker layout to leave more ram space for
the CircuitPython heap.
 2020-10-07 15:23:47 -07:00
Scott Shawcroft
2ad54f8413
Merge pull request #3463 from UnexpectedCircuitPython/UM_S2_Boards 
Updated UM FeatherS2 boards
 2020-10-01 10:56:55 -07:00
Scott Shawcroft
a6cfa507b6
Add to board list 2020-09-30 12:59:56 -07:00
Seon Rozenblum
4b1a7d812e Updated UM boards 2020-09-30 10:16:24 +10:00
Jeff Epler
8b27febf32 add new board to actions build 2020-09-26 11:43:46 -05:00
Dan Halbert
9cc803eb95
Merge pull request #3432 from bd34n/rename-bdmicro-vina-m0-d21 
Rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles.
 2020-09-19 13:41:21 -04:00
Scott Shawcroft
4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid 
Automate USB VID/PID Uniqueness Check
 2020-09-17 11:48:46 -07:00
Brian Dean
847d609ddc rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles appropriately 2020-09-16 16:27:24 -04:00