Dan Halbert
af1fab1915
Merge pull request #2226 from kamtom480/circuitpython-device-open
...
Do not open the same PWM device if it is already open
2019-10-23 15:08:40 -04:00
Dan Halbert
8f1421ea0b
Merge pull request #2237 from jepler/no-threaded-tests
...
ci: don't run the "thread" tests
2019-10-23 13:31:57 -04:00
Dan Halbert
9d7b984f3b
Merge pull request #2239 from hierophect/remove-lib-stm32
...
Remove leftover lib/stm32lib
2019-10-22 17:14:31 -04:00
Hierophect
dadfa69061
remove old library
2019-10-22 13:13:22 -04:00
Jeff Epler
4d53dd29a3
ci: don't run the "thread" tests
...
This part of the unix micropython port isn't related to any
functionality used in CircuitPython, and at least one of the tests
(thread_gc) fails with non-negligible frequency.
Reasons to revisit this in the future would include if/when thread
support is added in CircuitPython.
2019-10-21 20:58:07 -05:00
Kamil Tomaszewski
e4574fa3bf
Clean UART on reset
2019-10-21 13:17:51 +02:00
Scott Shawcroft
84c0d6cdf8
Merge pull request #2234 from Senuros/master
...
A few more german translations and some fixes
2019-10-20 21:35:09 -07:00
Senuros
2fd8038d87
more german translations and a few fixes
2019-10-21 03:16:11 +02:00
Scott Shawcroft
98e7579dee
Merge pull request #2230 from kamtom480/circuitpython-stack
...
Top and limit stack addresses
2019-10-18 10:41:00 -07:00
Kamil Tomaszewski
e2cb29f2a0
Change default stack size to 64kiB for Spresense
2019-10-18 15:43:06 +02:00
Kamil Tomaszewski
3ad13e14d8
Do not open the same UART device again
2019-10-18 12:39:52 +02:00
Kamil Tomaszewski
b39ca3f8be
Do not open the same PWM device again
2019-10-18 12:39:22 +02:00
Kamil Tomaszewski
1decd111d5
Do not open the same ADC device again
2019-10-18 12:38:39 +02:00
Kamil Tomaszewski
4338511b28
Add get top and limit functions for Spresense
2019-10-18 11:10:22 +02:00
Kamil Tomaszewski
f3151bb6c4
Use get top and limit stack functions
2019-10-18 11:05:08 +02:00
Kamil Tomaszewski
96756b3945
Add functions to get top and limit stack
2019-10-18 11:04:45 +02:00
Kamil Tomaszewski
30c9ad2b2a
Update Spresense SDK to 1.4.1
2019-10-18 10:29:32 +02:00
Scott Shawcroft
bd6c7c5546
Merge pull request #2223 from Senuros/master
...
Added more german translations and some fixes
2019-10-17 10:15:54 -07:00
Scott Shawcroft
d0d31bcc3b
Merge pull request #2224 from wallarug/wallarug/robohat_naming_fix
...
Changed to follow standard that Pad 0 is always TX
2019-10-17 10:14:52 -07:00
wallarug
8f2e5990db
Changed to follow standard that Pad 0 is always TX
2019-10-17 18:02:05 +11:00
Senuros
a0d1280853
Added more german translations and some fixes
2019-10-16 21:42:31 +02:00
Dan Halbert
64c1484bd7
Merge pull request #2222 from tannewt/fix_release_checks
...
Switch to the new release event type filter
2019-10-15 16:41:03 -04:00
Scott Shawcroft
63790f01f8
Merge pull request #2218 from CedarGroveStudios/master
...
Definitions for StringCar M0 Express and AT25SF161-SSHD-T 2MiB SPI flash chip
2019-10-15 09:46:39 -07:00
Scott Shawcroft
6f2e2faff2
Merge pull request #2214 from dhalbert/remove-unused-ports
...
Remove non-CircuitPython ports
2019-10-15 09:45:53 -07:00
Scott Shawcroft
b80048bf07
Merge pull request #2213 from dhalbert/cpu-voltage
...
Measure voltage supplied to chip
2019-10-15 09:45:16 -07:00
Dan Halbert
a0d18ac4e6
add dummy common_hal_mcu_processor_get_voltage() for spresense
2019-10-15 09:07:12 -04:00
Dan Halbert
eca73436c9
Merge remote-tracking branch 'adafruit/master' into cpu-voltage
2019-10-15 09:03:24 -04:00
Dan Halbert
9de155a132
Merge pull request #2220 from tannewt/support_dunder_bytes
...
Support __bytes__
2019-10-15 09:00:14 -04:00
Dan Halbert
fdd7ebef2d
change calibration from analogin_reset() to analogin_init()
2019-10-14 23:38:41 -04:00
Scott Shawcroft
6aad70b109
Switch to the new release event type filter
...
Fixes #2201
2019-10-14 20:16:59 -07:00
Scott Shawcroft
1610d06bb4
Switch arg check back to allow ignored args for strings
2019-10-14 19:59:23 -07:00
Dan Halbert
820ebcbf93
update tinyusb
2019-10-14 22:52:09 -04:00
Scott Shawcroft
1a7c787d3c
Merge branch 'master' into master
2019-10-14 19:47:46 -07:00
Dan Halbert
79cea72e29
Merge remote-tracking branch 'adafruit/master' into remove-unused-ports
2019-10-14 22:45:48 -04:00
Scott Shawcroft
9435e01f9e
Support __bytes
...
Fixes #1763
2019-10-14 16:05:17 -07:00
arturo182
756e4a41da
Merge pull request #2219 from arturo182/IS25LP128F
...
Add IS25LP128F flash device definition
2019-10-15 00:26:13 +02:00
Dan Halbert
615ec7f74d
merge from upstream
2019-10-14 18:12:58 -04:00
Scott Shawcroft
5971794e54
Merge pull request #2216 from jerryneedell/jerryn_nlr
...
restructure nlr.h for undefined archtectures
2019-10-14 14:51:51 -07:00
arturo182
e0f60d0c17
Add IS25LP128F flash device definition
2019-10-14 23:42:53 +02:00
Cedar Grove Maker Studios
2b9bb78d3e
add stringcar_m0_express to boards list
2019-10-14 14:30:32 -07:00
Scott Shawcroft
51582abc87
Merge pull request #2207 from kamtom480/circuitpython-spresense
...
Add Spresense board
2019-10-14 14:19:09 -07:00
Cedar Grove Maker Studios
f1ab9aaa9c
add def for AT25SF161-SSHD-T 2MiB SPI flash chip
2019-10-14 11:58:14 -07:00
Cedar Grove Maker Studios
bd608e0807
remove placeholder
2019-10-14 11:56:53 -07:00
Cedar Grove Maker Studios
b04a218bbc
initial load of stringcar m0 express defs
2019-10-14 11:56:18 -07:00
Cedar Grove Maker Studios
44ebc4c95d
establish stringcar m0 express definitions
2019-10-14 11:55:22 -07:00
Jerry Needell
051670038e
restructure nlr.h for udefined archtectures
2019-10-14 07:02:32 -04:00
Kamil Tomaszewski
150f9041e3
Fix unsafe floating point comparison
2019-10-14 09:13:35 +02:00
Kamil Tomaszewski
b750ed3a0f
Change Spresense firmware download link
2019-10-14 08:42:10 +02:00
Kamil Tomaszewski
8dfc8b584f
Change Spresense reference_voltage to 0.0 (None)
2019-10-14 08:22:14 +02:00
Kamil Tomaszewski
c67b2c1661
Return None if reference_voltage is 0.0
2019-10-14 08:22:14 +02:00
