a3008e447c
zephyr/modusocket: First step to switch to alternative FIFO processing.
...
Here we wait for non-empty FIFO, and then directly access/drop its head
element.
2017-05-16 13:43:06 +03:00
88c51c3592
tools/mpy-tool.py: Fix regression with freezing floats in obj repr C.
...
Regression was introduced by ec534609f6
2017-05-16 18:53:02 +10:00
a004554dc1
stmhal/modmachine: Remove TODO comment that is now implemented.
2017-05-16 17:44:14 +10:00
37bd3b4f4c
stmhal/modmachine: Add machine.UART class, linking to pyb.UART.
...
pyb.UART has a superset of machine.UART functionality so can be used to
provide compatibility with other ports that also implement machine.UART.
2017-05-16 17:40:22 +10:00
4b235800a4
esp8266/modnetwork: In connect, fix potential buffer overflows.
2017-05-16 17:30:45 +10:00
b1925b1bd8
atmel-samd: Fixup autoreset after switching boot to running once.
2017-05-15 20:21:26 -07:00
3f5028c666
atmel-samd: Support wav file playback. Tested up to 16bit 22.1khz. Must be mono file!
...
SD card support may work but likely needs buffer tuning. Its untested.
Fixes #105
2017-05-15 19:52:38 -07:00
292ba89ac2
tools: Make now runs uf2conv itself.
2017-05-15 15:44:43 -07:00
974847ac8d
atmel-samd: Add a safe mode which detects hard faults and reboots without running user code again.
2017-05-15 15:29:04 -07:00
162a0f942b
tests/io/bytesio_ext: Test read() after seek() past end of BytesIO object.
2017-05-15 23:58:06 +03:00
53461deb04
py/objstringio: Fix StringIO reads at or beyond EOF.
...
Existing code failed if seek() went past EOF (which is acceptable when writing).
2017-05-15 23:58:04 +03:00
d5713c8618
docs/library/index: Add important summary of the intro section as warning.
...
To make them harder to miss.
2017-05-15 00:26:44 +03:00
0ba136fbe9
docs/machine.Signal: Add initial draft description of Signal class.
2017-05-14 23:12:06 +03:00
c19f07bd52
docs/machine.Pin: There's no toggle() method in MicroPython hardware API.
...
May be a port-specific method, not portable, not part of the official
specification.
2017-05-14 22:52:16 +03:00
f06d0839bd
py/modsys: update conditionals for code referencing sys.stdout
...
Working on a build with PY_IO enabled (for PY_UJSON support) but PY_SYS_STDFILES disabled (no filesystem). There are multiple references to mp_sys_stdout_obj that should only be enabled if both PY_IO and PY_SYS_STDFILES are enabled.
2017-05-14 18:24:50 +03:00
55491031be
tools/mpy_cross_all.py: Helper tool to run mpy-cross on the entire project.
2017-05-14 17:51:12 +03:00
0c57979ce2
zephyr/modusocket: Implement getaddrinfo().
2017-05-13 16:42:35 +03:00
86c4544ef9
zephyr/modusocket: If there're no packets in recv_q, cancel waiter.
...
This solves a case when socker_read() has blocked on fifo, and then peer
closed event arrives.
2017-05-13 16:22:14 +03:00
69f0b4ad5b
zephyr/modusocket: Switch to net_pkt_append() returning length.
...
Requires patch in review.
2017-05-13 16:05:10 +03:00
39d3335606
zephyr/modusocket: Update for net_pkt refactor.
2017-05-13 15:47:47 +03:00
c022c9a2f0
zephyr/modusocket: Wrap pkt_get_info() call.
...
The most important info it returns are numbers of free buffers
in different pools (rx/tx packet headers, data fragments).
2017-05-13 15:23:31 +03:00
054a381d7c
tests/extmod/vfs_fat_more: Make skippable is uos is not available.
...
Fixes Zephyr tests.
2017-05-13 14:13:53 +03:00
cda09727b4
tests/extmod/vfs_fat: Add test for ilistdir of a non-existent directory.
2017-05-13 19:10:15 +10:00
f95e4e7782
extmod/vfs_fat_misc: Remove dot-dirs filter since FatFS already does it.
2017-05-13 18:58:46 +10:00
71df60cf42
esp8266/ets_alt_task.c: Prevent spurious large increment of ticks_ms()
...
This happened when the overflow counter for ticks_ms() was interrupted
by an external hard interrupt (issue #3076 ).
2017-05-13 17:56:16 +10:00
790c38e18c
atmel-samd: Rework boot, main and REPL order.
...
Boot will only run once now before USB is started. Its output goes to
boot_out.txt. After main and REPL will run with VM and hardware resets
between each.
2017-05-12 18:26:14 -07:00
ec534609f6
tools/mpy-tool.py: Use MP_ROM_xxx macros to support nanbox builds.
2017-05-13 10:08:13 +10:00
7672bf7736
atmel-samd: Rename auto-reset to auto-reload to reduce confusion with physical reset buttons.
2017-05-12 16:45:38 -07:00
e0f931afd3
atmel-samd: Fix pin reset to ensure USB and SWD are not reset.
2017-05-12 16:09:13 -07:00
e1a6f6d584
atmel-samd: Rework SPI flash defines for clarity.
...
Also add sector protection support for the SAMD Xplained board.
2017-05-12 14:47:39 -07:00
7ea76e0889
atmel-samd: Pin reset improvements.
...
* Reset SWD lines to SWD rather than GPIO. This makes OpenOCD happier.
* Default speaker enable lines to False for CircuitPlayground to prevent
the speaker from buzzing when no sound is playing. Fixes #126
2017-05-12 13:14:01 -07:00
6984425f5d
atmel-samd: Correctly wait for the SPI DMA transaction to finish.
2017-05-12 13:13:50 -07:00
5383a50072
zephyr/README: Update to require Zephyr 1.8.
...
There're a lot of changes and fixes in 1.8 regarding IP stack,
incompatible with previous Zephyr versions, so supporting them
doesn't make sense.
This is the last commit which should build with Zephyr 1.7.
2017-05-12 22:05:07 +03:00
d57c6564dc
zephyr/prj_qemu_x86.conf: Bump RAM size to 320K.
2017-05-12 21:58:51 +03:00
50d7ed325a
zephyr/modusocket: Add SOL_SOCKET and SO_REUSEADDR constants.
2017-05-12 21:55:42 +03:00
1659c0645d
zephyr/modusocket: Add dummy setsockopt() implementation.
2017-05-12 21:54:32 +03:00
a4e38db30d
unix: Move upip to frozen bytecode dir.
...
For x86_64 build, this saves only 128 bytes on the final executable
size, but still an improvement.
2017-05-12 18:32:25 +03:00
5c312861a6
unix/Makefile: Enable frozen bytecode modules dir.
2017-05-12 18:31:22 +03:00
ddf0b7dbc3
esp8266/scripts: Move initsetup & port_diag tools to modules/.
2017-05-12 17:58:50 +03:00
e9308c189a
esp8266/scripts: Move drivers/modules to modules/ (frozen bytecode).
2017-05-12 17:57:23 +03:00
5f7ce2a1ca
esp8266/modules/flashbdev: Reserve one sector for native code storage.
2017-05-12 16:08:54 +03:00
3e05df7fd1
esp8266/modesp: flash_user_start: Use value from linker script.
...
Make esp8266_common.ld export size reserved to all code segments, and use
that in esp.flash_user_start() implementation.
2017-05-12 16:00:05 +03:00
0987ad5e30
esp8266/esp8266.ld, esp8266_ota.ld: Grow main firmware size by 32KB.
...
To accommodate both system and user frozen modules.
2017-05-12 16:00:05 +03:00
760aa0996f
tests/basics/lexer: Add line continuation tests for lexer.
...
Tests for an issue with line continuation failing in paste mode due to the
lexer only checking for \n in the "following" character position, before
next_char() has had a chance to convert \r and \r\n to \n.
2017-05-12 15:14:25 +10:00
6f56412ec3
py/lexer: Process CR earlier to allow newlines checks on chr1.
...
Resolves an issue where lexer failed to accept CR after line continuation
character. It also simplifies the code.
2017-05-12 15:14:24 +10:00
5feeba8897
examples/hwapi/hwconfig*: Use inline Signal() args where possible.
2017-05-12 01:19:13 +03:00
c138d0f025
Merge pull request #128 from ntoll/master
...
Rename LEFT_BUTTON -> BUTTON_A, RIGHT_BUTTON -> BUTTON_B.
2017-05-11 10:04:05 -07:00
f3152571c6
Rename LEFT_BUTTON -> BUTTON_A, RIGHT_BUTTON -> BUTTON_B.
2017-05-11 14:48:17 +01:00
1d8c3f4cff
mpy-cross/Makefile: Override undefine any inherited variables.
...
This is a temporary hack to allow othe Makefiles to build mpy-cross
recursively.
2017-05-11 23:40:16 +10:00
a1f254028d
py/mkrules.mk: Add dependency of .mpy files upon mpy-cross.
...
This ensures that mpy-cross is automatically built (and is up-to-date) for
ports that use frozen bytecode. It also makes sure that .mpy files are
re-built if mpy-cross is changed.
2017-05-11 23:40:16 +10:00
Paul Sokolovsky
Damien George
puuu
Scott Shawcroft
Tom Collins
Robert HH
Nicholas H.Tollervey