For i2c.py: the accelerometer now uses the new I2C driver so need to
explicitly init the legacy i2c object to get the test working.
For pyb1.py: the legacy pyb.hid() call will crash if the USB_HID object is
not initialised.
This patch is a code optimisation, trading text bytes for speed. On
pyboard it's an increase of 0.06% in code size for a gain (in pystone
performance) of roughly 6.5%.
The patch optimises load/store/delete of attributes in user defined classes
by not looking up special accessors (@property, __get__, __delete__,
__set__, __setattr__ and __getattr_) if they are guaranteed not to exist in
the class.
Currently, if you do my_obj.foo() then the runtime has to do a few checks
to see if foo is a property or has __get__, and if so delegate the call.
And for stores things like my_obj.foo = 1 has to first check if foo is a
property or has __set__ defined on it.
Doing all those checks each and every time the attribute is accessed has a
performance penalty. This patch eliminates all those checks for cases when
it's guaranteed that the checks will always fail, ie no attributes are
properties nor have any special accessor methods defined on them.
To make this guarantee it checks all attributes of a user-defined class
when it is first created. If any of the attributes of the user class are
properties or have special accessors, or any of the base classes of the
user class have them, then it sets a flag in the class to indicate that
special accessors must be checked for. Then in the load/store/delete code
it checks this flag to see if it can take the shortcut and optimise the
lookup.
It's an optimisation that's pretty widely applicable because it improves
lookup performance for all methods of user defined classes, and stores of
attributes, at least for those that don't have special accessors. And, it
allows to enable descriptors with minimal additional runtime overhead if
they are not used for a particular user class.
There is one restriction on dynamic class creation that has been introduced
by this patch: a user-defined class cannot go from zero special accessors
to one special accessor (or more) after that class has been subclassed. If
the script attempts this an AttributeError is raised (see addition to
tests/misc/non_compliant.py for an example of this case).
The cost in code space bytes for the optimisation in this patch is:
unix x64: +528
unix nanbox: +508
stm32: +192
cc3200: +200
esp8266: +332
esp32: +244
Performance tests that were done:
- on unix x86-64, pystone improved by about 5%
- on pyboard, pystone improved by about 6.5%, from 1683 up to 1794
- on pyboard, bm_chaos (from CPython benchmark suite) improved by about 5%
- on esp32, pystone improved by about 30% (but there are caching effects)
- on esp32, bm_chaos improved by about 11%
This conditional import was only used to get the tests working on the unix
coverage build, which has now switched to use VFS by default so the uos
module alone has the required functionality.
Printing of uPy floats can differ by the floating-point precision on
different architectures (eg 64-bit vs 32-bit x86), so it's not possible to
using printing of floats in some parts of this test. Instead we can just
check for equivalence with what is known to be the correct answer.
Commit e269cabe3e added a check that the
first argument to the to_bytes() method is an integer, and now uPy
follows CPython behaviour and raises a TypeError for this test.
Note: CPython checks the argument types before checking the number of
arguments, but uPy does it the other way around, so they give different
exception messages for this test, but still the same type, a TypeError.
In adcall.py the pyb module may not be imported, so use ADCAll directly.
In dac.py the DAC object now prints more info, so update .exp file.
In spi.py the SPI should be deinitialised upon exit, so the test can run a
second time correctly.
If MICROPY_USE_INTERNAL_ERRNO is disabled, MP_EINVAL is not guaranteed
to have the value 22, so we cannot depend on OSError(22,).
Instead, to support any given port's errno values, without relying
on uerrno, we just check that the args[0] is positive.
This can be used to select the output buffer behaviour of the DAC. The
default values are chosen to retain backwards compatibility with existing
behaviour.
Thanks to @peterhinch for the initial idea to add this feature.
Reading into a bytearray will truncate values to 0xff so the assertions
checking read_timed() would previously always succeed.
Thanks to @peterhinch for finding this problem and providing the solution.
Keeping all the stress related tests in one place makes it easier to
stress-test a given port, and to also not run such tests on ports that
can't handle them.
The string "Q+?" is special in that it hashes to zero with the djb2
algorithm (among other strings), and a zero hash should be incremented to a
hash of 1.
The case of a return statement in the try suite of a try-except statement
was previously only tested by builtin_compile.py, and only then in the part
of this test which checked for the existence of the compile builtin. So
this patch adds an explicit unit test for this case.
When requested via 'run-tests -j', more than one test will be run
at a time. On my system, (i5-3320m with 4 threads / 2 cores), this
reduces elapsed time by over 50% when testing pots/unix/micropython.
Elapsed time, seconds, best of 3 runs with each -j value:
before patchset: 18.1
-j1: 18.1
-j2: 11.3 (-37%)
-j4: 8.7 (-52%)
-j6: 8.4 (-54%)
In all cases the final output is identical:
651 tests performed (18932 individual testcases)
651 tests passed
23 tests skipped: buffered_writer...
though the individual pass/fail messages can be different/interleaved.
The VM expects that, if mp_resume() returns MP_VM_RETURN_EXCEPTION, then
the returned value is an exception instance (eg to add a traceback to it).
It's possible that a value passed to a generator's throw() is not an
exception so must be explicitly checked for if the thrown value is not
intercepted by the generator.
Thanks to @jepler for finding the bug.
Prior to this patch the code would crash if a key in a ** dict was anything
other than a str or qstr. This is because mp_setup_code_state() assumes
that keys in kwargs are qstrs (for efficiency).
Thanks to @jepler for finding the bug.
micropython: ../../py/objtype.c:1100: super_attr: Assertion `MP_OBJ_IS_TYPE(self->type, &mp_type_type)' failed.
e.g., when making calls like
super(1, 1).x
Fixes the following assertion failures when the arguments to type()
were not of valid types:
micropython: ../../py/objtype.c:984: mp_obj_new_type: Assertion `MP_OBJ_IS_TYPE(bases_tuple, &mp_type_tuple)' failed.
micropython: ../../py/objtype.c:994: mp_obj_new_type: Assertion `MP_OBJ_IS_TYPE(items[i], &mp_type_type)' failed.
e.g., when making calls like
type("", (), 3)
type("", 3, {})
These allow accessing the filesystem label. For instance,
in boot.py, you can set the label on the built-in storage with:
storage.remount('/', False)
storage.getmount('/').label = "NEWLABEL"
storage.remount('/', True)
Users with multiple CIRCUITPY boards may find it desirable to
choose a different label for each board they own.
.. defaulting to off for circuitpython-supported boards, on for others.
.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
CPython doesn't allow SEEK_CUR with non-zero offset for files in text mode,
and uPy inherited this behaviour for both text and binary files. It makes
sense to provide full support for SEEK_CUR of binary-mode files in uPy, and
to do this in a minimal way means also allowing to use SEEK_CUR with
non-zero offsets on text-mode files. That seems to be a fair compromise.
This is just to test that the function exists and returns some kind of
valid value. Although this file is for testing ms/us functions, put the
ticks_cpu() test here so not to add a new test file.
This test for calling gc_realloc() while the GC is locked can be done in
pure Python, so better to do it that way since it can then be tested on
more ports.
Prior to this patch, some architectures (eg unix x86) could render floats
with "negative" digits, like ")". For example, '%.23e' % 1e-80 would come
out as "1.0000000000000000/)/(,*0e-80". This patch fixes the known cases.
Prior to this patch, some architectures (eg unix x86) could render floats
with a ":" character in them, eg 1e+39 would come out as ":e+38" (":" is
just after "9" in ASCII so this is like 10e+38). This patch fixes some of
these cases.
Prior to this patch the %f formatting of some FP values could be off by up
to 1, eg '%.0f' % 123 would return "122" (unix x64). Depending on the FP
precision (single vs double) certain numbers would format correctly, but
others wolud not. This patch should fix all cases of rounding for %f.
This patch concerns the handling of an NLR-raised StopIteration, raised
during a call to mp_resume() which is handling the yield from opcode.
Previously, commit 6738c1dded introduced code
to handle this case, along with a test. It seems that it was lucky that
the test worked because the code did not correctly handle the stack pointer
(sp).
Furthermore, commit 79d996a57b improved the
way mp_resume() propagated certain exceptions: it changed raising an NLR
value to returning MP_VM_RETURN_EXCEPTION. This change meant that the
test introduced in gen_yield_from_ducktype.py was no longer hitting the
code introduced in 6738c1dded.
The patch here does two things:
1. Fixes the handling of sp in the VM for the case that yield from is
interrupted by a StopIteration raised via NLR.
2. Introduces a new test to check this handling of sp and re-covers the
code in the VM.
Float parsing (both single and double precision) may have a relative error
of order the floating point precision, so adjust tests to take this into
account by not printing all of the digits of the answer.
These new tests cover cases that can't be reached from Python and get
coverage of py/mpz.c to 100%.
These "unreachable from Python" pieces of code could be removed but they
form an integral part of the mpz C API and may be useful for non-Python
usage of mpz.
There is a finite list of ascending primes used for the size of a hash
table, and this test tests that the code can handle a dict larger than the
maximum value in that list of primes. Adding this tests gets py/map.c to
100% coverage.
