Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
Scott Shawcroft
df1435ae94
Audit all boards with LED pins defined
...
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)
Fixes #6717
2022-08-11 14:41:20 -07:00
Dan Halbert
76e32dcf93
remove need for CIRCUITPY_ESP_PSRAM
2022-07-08 14:54:55 -04:00
Dan Halbert
780c4963cb
wip; change never-ever reset pin mechanism
2022-06-28 23:06:49 -04:00
Dan Halbert
55784c93de
wip; compiles
2022-06-26 21:22:22 -04:00
Dan Halbert
02069eb0b5
wip
2022-06-23 15:59:06 -04:00
Scott Shawcroft
4363361c87
Board definition clean up
...
Removes:
* AUTORESET_DELAY_MS which never did anything but was introduced
somehow.
* CIRCUITPY_BOOT_BUTTON in all but one ESP board because they all have
them. There is a default based on the strapping pins.
* BOARD_USER_SAFE_MODE_ACTION because it was all the same for boards
with boot buttons. Now the safe mode code manages the message.
2022-03-21 17:58:43 -07:00
Dan Halbert
90c5fb2515
Update ports/espressif/boards/adafruit_feather_esp32s2/pins.c
2022-03-01 19:56:23 -05:00
lady ada
ee52795540
fix automatic i2c enablement with rev C
2022-03-01 18:15:37 -05:00
Scott Shawcroft
65af10cd23
Tweak I2C and TFT power pin defaults
...
This should set the power to on by default without preventing the
user code from repeatedly using it.
Fixes #5903
2022-02-14 16:19:56 -08:00
Neradoc
b2c8fd3938
add board.STEMMA_I2C alias to some boards
2022-02-02 01:18:46 +01:00
Scott Shawcroft
d99847b410
Refactor pin reset on ESP
...
This makes it easier to blanket never reset flash and USB pins. It
also allows us to set a custom state after reset. The first case
is for the double tap reset that needs to be pulled low.
Fixes #5893
2022-01-20 12:40:41 -08:00
lady ada
8b26f594c9
try not resetting i2c power
2022-01-18 20:14:16 -05:00
lady ada
647b894e7b
?? some include needed
2022-01-18 20:14:16 -05:00
lady ada
9c933558b5
enable I2C by default
2022-01-18 20:14:15 -05:00
Scott Shawcroft
39639ecd17
Rework configs to take target into account
...
New script will filter settings to different tiers.
2022-01-13 15:55:37 -08:00
Kattni Rembor
fb96c09118
Add button pin to Feathers, fix pin order on QT Py.
2022-01-12 13:54:56 -05:00
Dan Halbert
cf70a9ca61
Turn on I2C power for each VM, instead of just after hard reset
2021-12-24 16:27:17 -05:00
Dan Halbert
889b25d792
put I2C_POWER_INVERTED alias before D7, for prettypins
2021-12-24 11:49:58 -05:00
Dan Halbert
cf349af35e
turn on I2C power after reset
2021-12-24 11:45:07 -05:00
Kattni Rembor
c13f1d19f5
Update pins to silk pin first.
2021-11-29 17:56:03 -05:00
anecdata
c2a5ca2fa2
INVERT the sense of the I2C_POWER pin (active low)
...
I don't have the board to test, but this was reported and discussed on Discord.
2021-11-16 14:47:53 -06:00
Dan Halbert
c61ab864da
Update ports/espressif/boards/adafruit_feather_esp32s2/board.c
2021-10-26 17:14:23 -04:00
Limor "Ladyada" Fried
037d893923
Update ports/espressif/boards/adafruit_feather_esp32s2/pins.c
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-10-26 15:55:18 -04:00
Limor "Ladyada" Fried
ccb6c5e5a9
Update ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.h
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-10-26 15:55:11 -04:00
Limor "Ladyada" Fried
5e59fa65ec
Update ports/espressif/boards/adafruit_feather_esp32s2/mpconfigboard.mk
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-10-26 15:54:49 -04:00
lady ada
ba4e9797c7
add a nuuuuuboard
2021-10-26 15:05:10 -04:00
