1be6c41da4
fix espressif serial over uart
2021-09-25 09:03:24 +05:30
10fdc80b9c
Merge pull request #5378 from jepler/esp32s2-paralleldisplay-i2s
...
Espressif: Use i2s peripheral for parallel LCD displays
2021-09-23 20:25:43 -05:00
a97e46be66
espressif: Fix ParallelBus clock speed
...
The observed does not match the datasheet, so go with what was
observed.
2021-09-23 14:12:59 -05:00
3f4bbc5aff
Fix number of LCD data pins
2021-09-23 13:37:30 -05:00
94ca3f594e
Enable CS "active-high" device support
...
Reference https://github.com/adafruit/Adafruit_CircuitPython_BusDevice/issues/71
Add a new parameter cs_active_value for devices that require CS to use "active high" logic.
Update mpconfigboard.mk to disable pyb_nano_v2 from core build as its flash is too small now.
2021-09-23 09:14:39 +01:00
4714861f38
espressif: Implement parallel display using i2s
2021-09-21 14:38:12 -05:00
2f1ac44d78
add files from espressif/esp-dev-kits@ec03a13333
2021-09-21 14:38:05 -05:00
276d425899
Merge pull request #5302 from maholli/pycubed_v05c
...
updating pycubed firmware for mainboardv05
2021-09-20 15:00:25 -07:00
48866dd3e7
Merge pull request #5367 from microDev1/refactor-esp-port
...
Update espressif port
2021-09-20 14:59:27 -07:00
58eda2e0e8
Merge pull request #5350 from microDev1/ci-docs-split
...
CI: Build docs dynamically
2021-09-20 14:53:40 -07:00
c5672066d0
initial xiao kb config
2021-09-20 15:52:28 -06:00
8e63a2e6c0
Merge pull request #5368 from skerr92/add-ODT-bread-2040
...
Add ODT Bread 2040
2021-09-20 17:13:23 -04:00
951ea46de1
Added CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
...
This is a recent addition to add `board.board_id` and `board.__name__`.
2021-09-20 16:52:16 -04:00
a980f8f743
added missing board config file
2021-09-19 16:09:17 +02:00
761b1dbf12
merged commits from main
2021-09-19 15:51:43 +02:00
de55073eea
Add ODT Bread 2040
2021-09-18 10:45:02 -06:00
7dda3ec91c
switch to `IDF_TARGET` for soc dependent stuff
...
Co-authored-by: Seon Rozenblum <seon@unexpectedmaker.com>
2021-09-18 19:49:32 +05:30
dcfde14bf9
move pins and sdkconfig into soc specific directories
2021-09-18 19:47:18 +05:30
eb0738fb33
update esp-idf to v4.3.1
2021-09-18 19:44:14 +05:30
1536ec0123
rename left over esp32s2 to espressif
2021-09-18 19:42:18 +05:30
bb424c7510
renamed folder and added neopixel gpio
2021-09-18 16:05:13 +02:00
be3fca81e7
fix espidf docs
2021-09-17 21:27:18 +05:30
0f8cb5618f
Merge branch 'adafruit:main' into pycubed_v05c
2021-09-16 12:12:36 -06:00
4eda8b04c4
removing redudant pycubed v04 board defs
2021-09-16 12:12:15 -06:00
a5dc0fef5f
Revert #5341 . Does not work on power-cycle.
2021-09-16 11:59:43 -04:00
1ccaeeb619
adding back heritage pycubed board defs
2021-09-15 14:36:27 -06:00
4f10a91f85
moving boot counter to main() and re-adding old pin names for SD_CS
2021-09-15 14:33:54 -06:00
5b69aa0a58
Merge branch 'adafruit:main' into pycubed_v05c
2021-09-15 14:23:56 -06:00
e91fb247a3
build docs dynamically
2021-09-16 00:05:42 +05:30
3cc4f25a1c
Merge pull request #5337 from hathach/tinyusb-compliance-stm-imxrt-esp32
...
update tinyusb to have esp32sx, stm32 and imxrt passed compliance test suite
2021-09-14 22:40:13 -07:00
9e8c6b2bab
Shrink pca10100 some more
2021-09-14 21:37:30 -04:00
02dc0481c5
shrink stm32f411ve_discovery
2021-09-14 19:50:46 -04:00
59b1bedcda
Merge pull request #5333 from microDev1/patch
...
Make `next_code_allocation` and `prev_traceback_allocation` movable
2021-09-14 19:27:40 -04:00
dfba2ee26e
Merge pull request #5342 from tannewt/rename_esp32s2_to_espressif
...
Rename esp32s2 port to espressif
2021-09-14 16:23:14 -07:00
0ab4df6f2f
shrink some SAMD21 builds, and nrf simmel
2021-09-14 17:10:49 -04:00
81e28308c2
Revert "turn off inline-unit-growth and max-inline-insns-auto uses"
...
This reverts commit 94d76e0f48
2021-09-14 16:56:04 -04:00
8520c430a7
Merge pull request #5341 from urish/patch-1
...
Enable WFI for raspberrypi port
2021-09-14 22:10:02 +05:30
94d76e0f48
turn off inline-unit-growth and max-inline-insns-auto uses
2021-09-14 12:15:21 -04:00
973a90f2aa
Rename esp32s2 port to espressif
...
This is in preparation for ESP32-S3 support and potentially others.
Related to #4363
2021-09-13 16:44:55 -07:00
650ce17c0d
Fix formatting
2021-09-13 19:12:21 -04:00
e5290a2886
Enable WFI for raspberrypi port
...
See #5331 for details
2021-09-14 01:09:15 +03:00
64ff8d9e19
v3 BLE file service: Add file modification times
2021-09-13 14:46:14 -07:00
5d90991745
Trade RAM for flash on pca10100
2021-09-13 12:04:27 -07:00
cddbfffb38
Merge pull request #5335 from skieast/espressif_hmi_v1.1_pins_update
...
Update pins.c to match hmi devkit board
2021-09-13 16:23:02 +05:30
a0d960f2a1
spresense: update SDK to 2.3.0
2021-09-13 11:04:15 +02:00
c4bea28446
Update pins.c to match hmi devkit board
2021-09-12 17:54:44 -07:00
dbd557dc89
splitting pycubed board def into pycubed_v04 and pycubed_v05
2021-09-11 20:29:40 -06:00
d9ae2c00b4
Merge branch 'adafruit:main' into pycubed_v05c
2021-09-11 20:09:59 -06:00
f5bb53e112
Merge pull request #5329 from dhalbert/prox-trinkey-squeeze
...
proxlight: Freeze adafruit_apds9960 instead of adafruit_hid; enable usb_midi
2021-09-10 18:17:42 -04:00
bc26194bd0
Merge branch 'adafruit:main' into pycubed_v05c
2021-09-10 13:33:11 -06:00
aa1d089cdb
proxlight: Freeze adafruit_adps9960 instead of adafruit_hid; enable usb_midi
2021-09-10 14:50:09 -04:00
189efdf074
Use NO_PIN, not 0, for PDMIn unset pins.
...
Also:
- Use NO_PIN, not 0xff for I2SOut (cosmetic fix only; no actual functional change)
- Add VOLTAGE_MONITOR/BATTERY, ACCELEROMETER_INTERRUPT pins for LED Glasses Driver
2021-09-10 13:18:29 -04:00
0ee0ed7035
Merge pull request #5320 from rjp5th/main
...
Implement reset_reason for raspberrypi port
2021-09-09 10:54:14 -07:00
647eca6a81
Added support for Challenger RP2040 WiFi
2021-09-09 17:36:56 +02:00
09859a60e7
Merge pull request #5319 from tannewt/fix_nrf_gcc11
...
Fix the nRF builds with GCC 11.2
2021-09-09 09:09:34 +05:30
fa83c1c2f9
adding boot counter to main.c
...
The boot counter is a uint8_t single-byte counter stored in the first NVM byte position (`micrcontroller.nvm[0]`). The counter increments by 1 each time the board boots, regardless if it's a hard or soft reset.
Enable the boot counter by adding `#define CIRCUITPY_BOOT_COUNTER 1` to your board's mpconfigboard.h file. Note that an error will be thrown during the build if `CIRCUITPY_INTERNAL_NVM_SIZE` is not also set within mpconfigboard.h.
2021-09-08 19:56:23 -06:00
5d29caf499
Merge branch 'adafruit:main' into pycubed_v05c
2021-09-08 19:37:06 -06:00
2b4fdcdfa2
Fix scanning after a peripheral bond has been made
...
The BLE workflow will be advertising and the scan's load of
identities conflicts with it. This change ensures scanning and
advertising happens exclusively.
This showed as an unknown error 3204.
Fixes https://github.com/adafruit/Adafruit_CircuitPython_BLE/issues/134
2021-09-08 16:58:53 -07:00
65f8804816
Implement reset_reason for raspberrypi port
2021-09-08 18:34:34 -04:00
f2de010059
Fix the nRF builds with GCC 11.2
...
See adafruit/Adafruit_nRF52_Bootloader#221
for background on the flag.
2021-09-08 12:53:39 -07:00
2ea330581d
Merge pull request #5310 from dhalbert/rsp2040-i2s-fix
...
Fix RP2040 I2S: always copy to output buffer
2021-09-07 18:18:30 -04:00
a5ac5e1efb
Merge pull request #5297 from durapensa/s2mini
...
Lolin S2 Mini - remove NeoPixel, pin assignments to match Wemos
2021-09-07 14:11:21 -07:00
d2d0bd289f
Fix RP2040 I2S: always copy to output buffer
2021-09-07 16:35:42 -04:00
674a3027fc
updating pycubed firmware for mainboardv05 :)
2021-09-04 18:39:24 -06:00
7e10785ec7
Lolin S2 Mini - fix EOF issue caught by pre-commit
2021-09-03 16:46:50 -04:00
2fc372b9e1
Lolin S2 Mini - Apply suggestions from code review
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-09-03 15:10:22 -04:00
8625e53817
change board dicts to include a common macro with __name__
2021-09-03 21:03:55 +02:00
15fc44cab7
Lolin S2 Mini fix typo in pin assignment
2021-09-03 12:20:07 -04:00
32b9450e7f
Lolin S2 Mini removed some redundant comments
2021-09-03 12:14:59 -04:00
c0f039da29
Lolin S2 Mini added pin definitions from Wemos/Lolin D1 Mini
2021-09-03 12:08:38 -04:00
ef6d7fe731
Lolin S2 Mini change 'Espressif' references to 'Wemos'
2021-09-03 10:17:44 -04:00
765eee424e
Lolin S2 Mini added I2C & SPI defs from Espressif MicroPython
2021-09-03 10:08:38 -04:00
ec20b2a02e
Merge branch 'main' of github.com:adafruit/circuitpython into s2mini
2021-09-03 09:26:47 -04:00
762c15535f
Lolin S2 Mini pin assignment changes
2021-09-03 09:12:14 -04:00
3508b01ed9
Merge pull request #5294 from tannewt/patch-1
...
Add FeatherS2 Neo from Unexpected Maker
2021-09-02 12:44:27 -07:00
bf5e8bf20b
Use Espressif PID
2021-09-02 10:17:38 -07:00
a78cc7a22c
Merge pull request #5293 from microDev1/patch
...
Make `aesio` module full build dependent
2021-09-02 09:34:53 -07:00
d526925d49
make aesio module full build dependent
2021-09-02 19:02:01 +05:30
9bfa2a416d
Added STAGE support for my TinyS2 board
2021-09-02 18:09:08 +10:00
24859ed596
Added support for my new FeatherS2 Neo esp32s2 board
2021-09-02 15:01:52 +10:00
57e4b78340
Merge pull request #5284 from tannewt/linking_fixes
...
Two fixes, one for ble workflow, one for linking
2021-09-01 15:21:33 -07:00
cf0899487f
Merge pull request #5237 from jepler/hmi
...
Add Espressif's HMI DevKit
2021-09-01 13:49:58 -07:00
0d280fa83c
Two fixes, one for ble workflow, one for linking
...
BLE workflow had an incorrect list size for characteristics
Linking didn't advance . link it should have without extra ().
2021-09-01 12:43:43 -07:00
9557ca89f2
Update USB PID
2021-09-01 10:50:48 -07:00
b80ffee105
Merge pull request #5268 from hathach/nrf-usb-compliance-test
...
Update tinyusb for USB Compliance Verification test
2021-09-01 10:48:35 -07:00
9c4c3e1780
Only sort .text for nrf
2021-09-01 08:57:18 -07:00
bec7a6265a
Change name VBAT_SENSE -> BATTERY
2021-08-31 19:52:40 -07:00
0cffa6be81
Sort .text section to reduce fill on nRF
2021-08-31 19:33:44 -07:00
cd5acae4f4
Sort .text section to reduce fill
2021-08-31 18:04:01 -07:00
736b592d2d
Add IO9 / VBAT_SENSE to lilygo-t8-s2-st7789
2021-08-31 16:50:50 -07:00
771b4c7464
Add two space saving knobs
...
* Reduce the number of supported HID reports of IDs per descriptor.
This saves ~200 bytes in the default HID objects.
* (Not enabled) Compute QSTR attrs on init. This trades 1k RAM for
flash. Flash is the default (1).
2021-08-31 13:02:34 -07:00
cc0a6c8a5f
Merge remote-tracking branch 'adafruit/main' into fix_nrf_wdt_crashes
2021-08-31 11:03:44 -07:00
513ca098f9
Merge pull request #5273 from tannewt/fix_nrf_light_sleep_cdc
...
Fix nrf light_sleep when on usb
2021-08-31 13:29:04 +05:30
1dbeed87af
Merge pull request #5253 from tannewt/fix_nrf_gpiote_crash
...
Fix GPIOTE crashes by checking everything is ok
2021-08-31 09:11:36 +05:30
6ef5241f59
Merge pull request #5267 from pewpew-game/meowbit-stage
...
stm32: Add support for Stage games to Meowbit
2021-08-30 18:35:41 -07:00
5fb4fa6f12
Merge pull request #5260 from jepler/paralleldisplay
...
Split out paralleldisplay to its own module
2021-08-30 18:35:15 -07:00
fa9c2189d4
Fix nrf light_sleep when on usb
...
Don't let pending serial input wake us up
Fixes #5257
2021-08-30 18:26:12 -07:00
a4246bcfa3
Fix two watchdog crashes
...
Fixes a crash from trying to raise an exception when trying to
deinit a RESET wdt by not raising an exception.
Fixes a crash when raise a wdt exception in the REPL when waiting
for input. We now catch and print any exceptions raised.
Fixes #5261
2021-08-30 18:10:43 -07:00
3ea90dbc1e
Merge pull request #5263 from jepler/printf-0xp
...
Include leading 0x on addresses printed with %p
2021-08-30 18:00:43 -07:00
838d30b3a4
Fix incorrect macros
2021-08-30 14:40:14 -07:00
microDev
Jeff Epler
Jeff Epler
Michael Thomson
Scott Shawcroft
Pierre Constantineau
Dan Halbert
leoli51
Seth Kerr
Max Holliday
Dan Halbert
Scott Shawcroft
Uri Shaked
Kamil Tomaszewski
Bruce Segal
Pontus Oldberg
Robert Pafford
Kattni
Durapensa
durapensa
Neradoc
Seon Rozenblum