djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
10,144 Commits 21 Branches 274 Tags 785 MiB
a6e5846ba7
Commit Graph

956 Commits

Author SHA1 Message Date
Damien George
194d6b6788 stm32/timer: Correctly initialise extended break settings on F7/H7/L4. 
Fixes issue #4693.
 2019-04-15 11:41:03 +10:00
Damien George
fd112239d6 stm32/rtc: Remove non-ASCII mu-character from source code comment. 
And fix a typo in the comment on this line.
 2019-04-12 11:32:24 +10:00
Damiano Mazzella
3c9f78b048 zephyr/CMakeLists.txt: Set AR to point to the Zephyr toolchain exe. 2019-04-11 12:24:05 +10:00
Damien George
fc9f2ff0cd stm32/rtc: Remove unused LSE detection code. 2019-04-11 12:14:21 +10:00
Damien George
46e5d6b889 stm32/rtc: Add auto-LSE-bypass detection with fallback to LSE then LSI. 
If MICROPY_HW_RTC_USE_BYPASS is enabled the RTC startup goes as follows:
- RTC is started with LSE in bypass mode to begin with
- if that fails to start (after a given timeout) then LSE is reconfigured
  in non-bypass
- if that fails to start then RTC is switched to LSI
 2019-04-11 12:09:21 +10:00
Damien George
358364b45e stm32/boards/NUCLEO_L432KC: Disable complex nos and default frozen mods. 
To save space, since this board only hase 256k of flash.
 2019-04-09 11:23:08 +10:00
Damien George
4831e38c7e stm32/boards/NUCLEO_H743ZI: Add config options to support mboot. 2019-04-08 14:34:37 +10:00
Damien George
fd13ce5e60 stm32/mboot: Add support for H7 MCUs, with H743 flash layout. 2019-04-08 14:33:57 +10:00
Damien George
ae1e18a346 stm32/usbd_conf: Add support for USB HS peripheral on H7 MCUs. 2019-04-08 14:30:16 +10:00
Damien George
2c3fa4ad82 stm32/i2cslave: Add support for H7 MCUs. 2019-04-08 14:28:45 +10:00
Damien George
fd523c53c3 stm32/network_wiznet5k: Automatically set MAC if device doesn't have one 2019-04-05 22:37:06 +11:00
Damien George
4f936afc44 stm32/network_wiznet5k: Add ability to set the MAC address. 2019-04-05 22:35:04 +11:00
Damien George
4410efc1e3 stm32/network_wiznet5k: Add ability to trace Ethernet TX and RX frames. 
Via: nic.config(trace=2|4)
 2019-04-05 22:33:49 +11:00
Damien George
69cb24a21d esp32/boards/sdkconfig: Disable WDT check of idle task on CPU1. 
With dual-core enabled it's possible that the uPy task has full utilisation
of CPU1.  Fixes issue #4673.
 2019-04-05 12:25:21 +11:00
Glenn Ruben Bakke
1f5d945afa nrf/Makefile: Update to match latest oofatfs version. 
See corresponding commit b5f33ac2cb
 2019-04-01 19:22:25 +02:00
Damien George
83f3c29d36 stm32/moduos: Allow to compile again without USB enabled. 2019-04-01 17:11:39 +11:00
Damien George
7ce2a08231 stm32: Add support for MMC driver, exposed via pyb.MMCard class. 
Enable it via MICROPY_HW_ENABLE_MMCARD.
 2019-04-01 17:04:43 +11:00
Damien George
9670b26526 stm32: Rename MICROPY_HW_HAS_SDCARD to MICROPY_HW_ENABLE_SDCARD. 
For consistency with the majority of other MICROPY_HW_ENABLE_xxx macros.
 2019-04-01 15:21:26 +11:00
Damien George
7b5bf5f6fd stm32/uart: Handle correctly the char overrun case of RXNE=0 and ORE=1. 
Fixes issue #3375.
 2019-04-01 13:40:35 +11:00
roland van straten
edd0e0f93d stm32/timer: Expose the PWM BRK capability of Timer 1 and 8. 
The break mode is configurable via the 'brk' keyword to the Timer
constructor and init method.  It's disabled by default.
 2019-04-01 13:30:37 +11:00
Andrew Leech
9d6f70f715 stm32: Make default USB_VCP stream go through uos.dupterm for main REPL. 
Use uos.dupterm for REPL configuration of the main USB_VCP(0) stream on
dupterm slot 1, if USB is enabled.  This means dupterm can also be used to
disable the boot REPL port if desired, via uos.dupterm(None, 1).

For efficiency this adds a simple hook to the global uos.dupterm code to
work with streams that are known to be native streams.
 2019-04-01 13:04:05 +11:00
Boris Vinogradov
6947dff7da stm32/Makefile: Allow to override CROSS_COMPILE with included Makefile. 2019-03-29 11:34:05 +11:00
Boris Vinogradov
1a608ce1e8 stm32/boards/STM32L476DISC: Enable servo support on STM32L476DISC board. 2019-03-28 15:35:58 +11:00
Damien George
92149c8a79 esp32/boards: Enable dual core support by default. 
Single core is still supported, just by adding CONFIG_FREERTOS_UNICORE=y to
a custom sdkconfig file.
 2019-03-27 11:20:21 +11:00
Damien George
815b79a8d0 esp32/mpthreadport: Exit vPortCleanUpTCB early if threading not init'd. 2019-03-27 11:11:06 +11:00
Damiano Mazzella
0b86ba565c unix/mpthreadport: Use named semaphores on Mac OS X. 
Unnamed semaphores (via sem_init) are not supported on this OS.  See #4465.
 2019-03-27 10:50:01 +11:00
Damien George
781947afdc stm32/mpconfigport.h: Remove malloc/free/realloc helper macros. 
These macros are unused, and they can conflict with other entities by the
same name.  If needed they can be provided as static inline functions, or
just functions.

Fixes issue #4559.
 2019-03-26 18:42:19 +11:00
roland van straten
d396a7e10d stm32/system_stm32: Provide default value for HSI calibration. 
If HSI is used the calibration value must be valid.  Fixes #4596.
 2019-03-26 17:10:21 +11:00
Maureen Helm
2befcb8a9d zephyr/i2c: Add support for hardware i2c. 
Adds support for hardware i2c to the zephyr port. Similar to other ports
such as stm32 and nrf, we only implement the i2c protocol functions
(readfrom and writeto) and defer memory operations (readfrom_mem,
readfrom_mem_into, and writeto_mem) to the software i2c implementation.
This may need to change in the future because zephyr is considering
deprecating its i2c_transfer function in favor of i2c_write_read; in this
case we would probably want to implement the memory operations directly
using i2c_write_read.

Tested with the accelerometer on frdm_k64f and bbc_microbit boards.
 2019-03-26 16:16:26 +11:00
Damien George
673db939b5 esp32/machine_pin: Rework pull mode config to fix GPIO hold feature. 
For gpio_hold_en() to work properly (not draw additional current) pull
up/down must be disabled when hold is enabled.  This patch makes sure this
is the case by reworking the pull constants to be a bit mask.
 2019-03-26 15:21:23 +11:00
Glenn Ruben Bakke
e0c6dfe90a nrf/readme: Add section about LTO. 
Adding section about on how to disable use of the linker flag
-flto, by setting the LTO=0 argument to Make. Also, added a
note on recommended toolchains to use that works well with
LTO enabled.
 2019-03-19 16:59:18 +01:00
Dave Hylands
ec6e62efc2 stm32/mboot: Set USE_MBOOT=1 by default in the Makefile. 
This allows boards that need USE_MBOOT to be built properly whether or not
USE_MBOOT=1 is specified when building mboot.
 2019-03-18 14:01:43 +11:00
Glenn Ruben Bakke
696549d2e5 nrf/bluetooth: Deprecate use of SoftDevice s140 v6.0.0. 
Removing linker script for nrf52840 s140 v6.0.0 as pca10056
target board now points to the new v6.1.1. Also, removing the
entry from the download_ble_stack.sh script.
 2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke
a3a266a9c3 nrf/board: Migrate nrf52840 target to new BLE stack. 
This patch moves pca10056/nrf52840 target board to use
the new SoftDevice s140 v6.1.1 instead of the legacy v6.0.0.
 2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke
d3c1436e75 nrf/bluetooth: Add support for SoftDevice s140 version 6.1.1. 
Updating download script to fetch the new SoftDevice, and
adding corresponding linker script for the BLE stack.
 2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke
1e5e3e3d48 nrf/bluetooth: Deprecate use of SoftDevice s132 v6.0.0. 
Removing linker script for nrf52832 s132 v6.0.0 as all target
boards now points to the new v6.1.1. Also, removing the entry
from the download_ble_stack.sh script.
 2019-03-15 20:50:15 +01:00
Glenn Ruben Bakke
5f26ef1112 nrf/board: Migrate all nrf52832 targets to new BLE stack. 
This patch moves all the nrf52832 target boards to use the
new SoftDevice s132 v6.1.1 instead of the legacy v6.0.0.
 2019-03-15 20:50:15 +01:00
Nguyen Hoan Hoang
e8ed2dea71 nrf/bluetooth: Add support for SoftDevice s132 version 6.1.1. 
Updating download script to fetch the new SoftDevice, and
adding corresponding linker script for the BLE stack.
 2019-03-15 20:50:15 +01:00
roland van straten
c9eb7eb449 stm32/stm32_it: Guard UART7_IRQHandler with check for UART7 define. 
All STM32 with a UART7 also have a UART8 and vice versa, but this change
improves readability and allows for them to be independent in the future.
 2019-03-14 14:02:21 +11:00
Damien George
c7d19dc0ad ports/{stm32,esp8266}: Set mpy-cross native arch for frozen native code. 2019-03-14 12:22:49 +11:00
Damien George
ddc934631c esp32/machine_pin: Add new PULL_HOLD pin pull mode. 2019-03-14 07:28:57 +11:00
Damien George
349b54525e esp32/machine_pin: Make it so None as pull value disables pull up/down. 
Previously specifying None as the pull value would leave the pull up/down
state unchanged.  This change makes it so -1 leaves the state unchanged and
None makes the pin float, as per the docs.
 2019-03-14 07:26:59 +11:00
Wolf Vollprecht
ea2fcdd338 javascript: Fix Emscripten async load, and to compile with modern clang. 2019-03-13 23:52:15 +11:00
Rami Ali
7d675f3a17 javascript: Add new port targeting JavaScript via Emscripten. 
In this port JavaScript is the underlying "machine" and MicroPython is
transmuted into JavaScript by Emscripten.  MicroPython can then run under
Node.js or in the browser.
 2019-03-13 23:47:32 +11:00
Maureen Helm
493ee7df18 zephyr/prj_frdm_kw41z.conf: Add new board configuration. 
Adds a new board configuration for the frdm_kw41z board, including support
for the fxos8700 accelerometer/magnetometer/die temperature sensor.
 2019-03-12 17:12:13 +11:00
Maureen Helm
7748375b6e zephyr/prj_frdm_k64f.conf: Add fxos8700 sensor. 
Adds the fxos8700 accelerometer/magnetometer/die temperature sensor to the
frdm_k64f board configuration.
 2019-03-12 17:12:00 +11:00
Paul Sokolovsky
6d82499a48 zephyr/Makefile: Proxy ram_report, rom_report targets from Zephyr. 2019-03-12 17:11:52 +11:00
Paul Sokolovsky
755b0b807b zephyr/prj_minimal.conf: Switch to CONFIG_STDOUT_CONSOLE. 
Prompted by code size analysis, after arduino_101 build overflowing ROM.
 2019-03-12 17:11:46 +11:00
Paul Sokolovsky
21fc0c448e zephyr/modzsensor: Rename "TEMP" sensor channel to "DIE_TEMP". 
I.e. on-die temperature sensor.  Upstream made more fine-grained channels
for different kinds of temperature.
 2019-03-12 17:11:30 +11:00
Paul Sokolovsky
a42c1d9fd5 zephyr/modzephyr: Revamp stacks_analyze() call. 
Underlying k_call_stacks_analyze() was gone in Zephyr, reimplement using
k_thread_foreach().
 2019-03-12 17:11:09 +11:00